Drukhari – Raider
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
6

Raider

NoNAME  M WS BS S T W! A Ld Sv Base
95
Raider (base: 60mm flying base)
1
95
Raider
14" 4+ 3+ 6 6 6-10 3 7 4+ 60mm flying base
10" 4+ 4+ 6 6 3-5 D3 7 4+
6" 4+ 5+ 6 6 1-2 1 7 4+
A Raider is equipped with: dark lance; bladevanes.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
+10
Dark lance
+10
Dark lance
36"
Heavy 1
8
-4
D3+3
-
+5
Disintegrator cannon
+5
Disintegrator cannon
36"
Heavy 3
5
-3
2
-
+5
Phantasm grenade launcher
+5
Phantasm grenade launcher
18"
Assault D3
-
-
-
Blast. Each time a unit is hit by this weapon, roll 2D6. If the result is higher than the Leadership characteristic of that unit, it suffers 1 mortal wound.
Blast. Each time a unit is hit by this weapon, roll 2D6. If the result is higher than the Leadership characteristic of that unit, it suffers 1 mortal wound.
Bladevanes
Bladevanes
Melee
Melee
+1
-1
1
-
OTHER WARGEAR
ABILITIES 
+5
Chain-snares
Add 3 to the bearer’s Attacks characteristic.
+5
Chain-snares
Add 3 to the bearer’s Attacks characteristic.
+5
Grisly trophies
The bearer gains the following ability: ‘Grisly Trophies (Aura): While an enemy unit is within 3" of this model, subtract 2 from the Leadership characteristic of models in that unit.’
+5
Grisly trophies
The bearer gains the following ability: ‘Grisly Trophies (Aura): While an enemy unit is within 3" of this model, subtract 2 from the Leadership characteristic of models in that unit.’
+5
Shock prow
The bearer has the SHOCK PROW keyword.
+5
Shock prow
The bearer has the SHOCK PROW keyword.
+10
Splinter racks
Each time a model embarked on this transport makes an attack with a Rapid Fire weapon, treat the target as being within half that weapon’s range.
+10
Splinter racks
Each time a model embarked on this transport makes an attack with a Rapid Fire weapon, treat the target as being within half that weapon’s range.
WARGEAR OPTIONS
WARGEAR OPTIONS
 • This model's dark lance can be replaced with 1 disintegrator cannon.
 • This model can be equipped with any of the following: 1 chain-snares; 1 grisly trophies; 1 phantasm grenade launcher; 1 shock prow; 1 splinter racks.
ABILITIES
ABILITIES
Blade Artists, Power From Pain
Open-topped: In your Shooting phase, units embarked within this transport can be selected to shoot with; measure distances and draw line of sight from any point on this transport when doing so. If this transport made a Normal Move, Advanced or Fell Back this turn, embarked units are considered to have done the same. While this transport is within Engagement Range of any enemy units, embarked units cannot shoot, except with Pistols.
Hovering: Distances are always measured to and from this model’s hull.
Night Shield: This model has a 5+ invulnerable save against ranged attacks.
Explodes: When this transport is destroyed, roll one D6 before any embarked models disembark and before removing it from play. On a 6 it explodes, and each unit within 6" suffers D3 mortal wounds.
TRANSPORT
TRANSPORT
This model has a transport capacity of 11 DRUKHARI INFANTRY models. Each GROTESQUES model takes the space of two models. This model cannot transport SCOURGES or SKYBOARD models.
FACTION KEYWORDS: AELDARI, DRUKHARI, or or
KEYWORDS: VEHICLE, TRANSPORT, FLY, RAIDER

Datasheet-related Stratagems

THE TORTURER’S CRAFT1CP/2CP
Drukhari – Battle Tactic Stratagem

Over long millennia in Commorragh’s undercity, the Haemonculus Covens have perfected the craft of carving flesh.

Use this Stratagem in the Fight phase when URIEN RAKARTH or a unit from your army is selected to fight. Until the end of the phase, each time a model in that unit makes an attack, you can re-roll the wound roll. If this Stratagem is used when a CHARACTER or WRACKS unit that contains 10 or less models is selected to fight, it costs 1CP; otherwise, it costs 2CP.
LIGHTNING-FAST REACTIONS1CP
Drukhari – Battle Tactic Stratagem

The hyper-fast reflexes of the Drukhari allow them to duck and weave to avoid all but the swiftest enemy strikes.

Use this Stratagem in your opponents Shooting phase or the Fight phase, when a DRUKHARI INFANTRY, DRUKHARI VEHICLE or DRUKHARI BIKER unit from your army (excluding URIEN RAKARTH or a unit) is selected as the target of an attack. Until the end of the phase, each time an attack is made against that unit, subtract 1 from that attack’s hit roll.
ATHLETIC AERIALISTS1CP
Cult of the Red Grief – Strategic Ploy Stratagem

Wyches of the Red Grief set foot on solid ground only for as long as it takes to butcher the enemy.

Use this Stratagem after a CULT OF THE RED GRIEF INFANTRY unit has resolved its close combat attacks, but before it makes a consolidation move. Instead of consolidating as normal, if every model from this unit is within 6" of a friendly CULT OF THE RED GRIEF TRANSPORT unit, they can embark in that TRANSPORT as if it were the Movement phase even if this unit has disembarked this turn, provided it has enough transport capacity remaining to embark the whole unit.
EVISCERATING FLY-BY1CP/2CP
Drukhari – Strategic Ploy Stratagem

The airborne combatants of a Wych Cult have no need to slow down in order to carry out their slaughter.

Use this Stratagem in your Movement phase, when you select a unit that can FLY to make a Normal Move or Advance. After this unit has moved, select one enemy unit this unit moved across and roll one D6 for each model in this unit, adding 1 to the result if the enemy unit is an INFANTRY unit: for each result of 5+, that enemy unit suffers 1 mortal wound. If the selected unit contains 5 or fewer models, this Stratagem costs 1CP; otherwise, it costs 2CP.
NEVER STATIONARY2CP
Drukhari – Strategic Ploy Stratagem

The Drukhari are masters at using hit-and-run tactics, engaging a target with a flurry of shots before quickly manoeuvring into cover or out of sight.

Use this Stratagem in your Shooting phase after making attacks with a DRUKHARI unit (excluding AIRCRAFT units) from your army. That unit can immediately make a Normal Move of up to 7". Until the end of the turn, that unit is not eligible to declare a charge.
SCREAMING JETS1CP
Drukhari – Strategic Ploy Stratagem

Just as terrifying as a sudden emergence from the webway is the meteoric descent of a Drukhari raiding craft behind enemy lines.

Use this Stratagem before the battle when declaring reserves and transports (if you are playing a mission without this step, use this Stratagem during deployment instead). You can set up one DRUKHARI VEHICLE unit from your army in the skies instead of placing it on the battlefield.

In the Reinforcements step of one of your Movement phases, you can set up this unit anywhere on the battlefield that is more than 9" away from any enemy models. You can only use this Stratagem once.
SWIFT OUTFLANKING1CP
Drukhari – Strategic Ploy Stratagem

Transport barques seek to ferry their murderous cargo on new attack angles, or else move aloft to provide encircling fire support.

Use this Stratagem at the end of your Movement phase. Select one DRUKHARI TRANSPORT unit from your army that is wholly within 9" of any battlefield edge. Remove that unit from the battlefield. That unit is placed into Strategic Reserves.
MURDEROUS DESCENT1CP
Drukhari – Strategic Ploy Stratagem

As their transports descend, Drukhari are swift to plunge into their prey, blades bared.

Use this Stratagem in the Reinforcements step, after a TRANSPORT unit from your army is set up on the battlefield. Any units embarked upon that TRANSPORT unit can disembark after it is set up, but when they do so, they must be set up more than 9" away from any enemy units.
ENHANCED AETHERSAILS1CP
Drukhari – Wargear Stratagem

Drukhari raiding craft bear many enhancements that allow for lightning-fast attacks and swift withdrawals.

Use this Stratagem in your Movement phase, when a RAIDER or RAVAGER unit from your army is selected to Advance. Do not make an Advance roll. Instead, until the end of the phase, add 8" to the Move characteristic of this model.
SHOCK PROW1CP
Drukhari – Wargear Stratagem

Many Drukhari outfit their vehicles with energised rams which, when activated, emit directional waves of force, capable of carving through infantry formations and even shattering the hulls of tanks.

Use this Stratagem in the Charge phase, when a DRUKHARI SHOCK PROW unit from your army finishes a charge move. Select one enemy unit within Engagement Range of that SHOCK PROW unit:
  • If the selected enemy unit is a VEHICLE unit, roll one D6: on a 2+, that unit suffers D3 mortal wounds.
  • If the selected enemy unit is not a VEHICLE unit, roll one D6 for each model in that enemy unit that is within Engagement Range of the SHOCK PROW unit. For each dice result that equals or exceeds that enemy unit’s Toughness characteristic, it suffers 1 mortal wound.
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.
ASSAULT
Assault weapons fire so rapidly or indiscriminately that they can be shot from the hip as warriors dash forwards into combat.
If a unit includes any models equipped with Assault weapons, that unit is still eligible to shoot with in your Shooting phase even if it has Advanced this turn, but you can only resolve attacks using those Assault weapons when you select that unit to shoot with. If a model shoots an Assault weapon in the same turn in which its unit has Advanced, subtract 1 from hit rolls when resolving that weapon’s attacks.

  • Can be shot even if firing model’s unit Advanced.
  • Subtract 1 from hit rolls if the firing model’s unit Advanced.

Phantasm grenade launcher used in the following datasheets:

Fast Attack
Dedicated Transport
Heavy Support
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
Morale Tests
To take a Morale test, roll one D6 and add the number of models from the unit that have been destroyed this turn. If the result is equal to or less than the highest Leadership (Ld) characteristic in the unit, the Morale test is passed and nothing else happens. An unmodified roll of 1 also always results in a passed Morale test, irrespective of the total result. In any other case, the Morale test is failed, one model flees that unit, and you must then take Combat Attrition tests for the remaining models in the unit. You decide which model from your unit flees – that model is removed from play and counts as having been destroyed, but it never triggers any rules that are used when a model is destroyed.

  • Morale test = D6 + number of models destroyed this turn.
  • Unmodified roll of 1 always a success (no models flee).
  • If Morale test exceeds unit’s Ld, one model flees and other models must take Combat Attrition tests.
Power From Pain

As the Drukhari feed on the souls of the slain, they become imbued with supernatural might, eventually turning into killing machines.

This ability only applies if every unit in your army is a DRUKHARI or UNALIGNED unit. At the start of each battle round, this ability gains additional effects. These effects are cumulative.
BATTLE ROUNDADDITIONAL EFFECT
1+Inured to Suffering: Models in this unit have a 6+ invulnerable save
2+Eager to Flay: This unit is eligible to declare a charge in a turn in which they Advanced
3+Flensing Fury: Each time a model in this unit makes a melee attack, add 1 to that attack’s hit roll. If this unit has the VEHICLE or MONSTER keyword, it does not suffer the penalty incurred to its hit rolls for firing Heavy weapons at enemy units that are within Engagement Range of it. 
4+Mantle of Agony: Models in this unit have a 5+ invulnerable save
5+Emboldened by Bloodshed: Each time a Morale test is taken for this unit, it is automatically passed. If this unit's characteristics can change as it suffers damage, this unit is considered to have double the number of wounds remaining for the purposes of determining what those characteristics are. 

The DRUKHARI and VEHICLE keywords are used in the following Drukhari datasheets:

Dedicated Transport
Fortifications

The DRUKHARI and BIKER keywords are used in the following Drukhari datasheets:

The URIEN RAKARTH keyword is used in the following Drukhari datasheets:

The keyword is used in the following Drukhari datasheets:

Troops
Dedicated Transport
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.

The SKYBOARD keyword is used in the following Drukhari datasheets:

Fast Attack

The CULT OF THE RED GRIEF and INFANTRY keywords are used in the following Drukhari datasheets:

Troops
Fast Attack
Consolidate
When a unit consolidates, you can move each model in the unit up to 3" – this is a Consolidation move. Each model must finish its Consolidation move closer to the closest enemy model. A model that is already touching an enemy model cannot move, but still counts as having consolidated. Remember that a unit must finish any type of move in unit coherency.

  • Consolidate: Move up to 3".
  • Must end closer to the closest enemy model.

The CULT OF THE RED GRIEF and TRANSPORT keywords are used in the following Drukhari datasheets:

Dedicated Transport
Heavy Support
Transport Capacity
All TRANSPORT models have a transport capacity listed on their datasheet. This determines how many friendly models, and of what type, can embark within them. A model’s transport capacity can never be exceeded.

Units can start the battle embarked within a TRANSPORT instead of being set up separately – declare what units are embarked within a TRANSPORT model before you set it up.

  • Transport capacity: Maximum number of models that can embark within the Transport.
  • Units can start the battle embarked in a TRANSPORT.
Flying
If a unit’s datasheet has the FLY keyword, then when it makes a Normal Move, an Advance or it Falls Back, its models can be moved across other models (and their bases) as if they were not there, and they can be moved within Engagement Range of enemy models. In addition, any vertical distance up and/or down that they make as part of that move is ignored. However, these models cannot finish their move either on top of another model (or its base) or within Engagement Range of any enemy models.

  • FLY models can move over other models when they make a Normal Move, an Advance or when they Fall Back.
  • FLY models ignore vertical distances when they make a Normal Move, an Advance or when they Fall Back.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.

Dark lance used in the following datasheets:

Dedicated Transport
Heavy Support
Blade Artists

Every denizen of Commorragh learns from a young age the value of blades, and all are adept in their usage, whether those wielded by their cruel hands or as part of their razor-edged armour.

Each time a model in this unit makes an attack with a melee weapon, on an unmodified wound roll of 6, improve the Armour Penetration characteristic of that attack by 1.

The keyword is used in the following Drukhari datasheets:

Troops
Dedicated Transport

The GROTESQUES keyword is used in the following Drukhari datasheets:

The WRACKS keyword is used in the following Drukhari datasheets:

Troops

This datasheet has Dedicated Transport Battlefield Role. Full list of Drukhari units sharing same Battlefield Role follows:

Dedicated Transport

Disintegrator cannon used in the following datasheets:

Dedicated Transport
Heavy Support

Bladevanes used in the following datasheets:

Dedicated Transport
Heavy Support
Fast Attack

Chain-snares used in the following datasheets:

Dedicated Transport
Heavy Support

Grisly trophies used in the following datasheets:

Dedicated Transport
Heavy Support

Shock prow used in the following datasheets:

Dedicated Transport
Heavy Support

The SHOCK PROW keyword is used in the following Drukhari datasheets:

Dedicated Transport
Heavy Support

– if equipped with the Shock prow this unit obtains the SHOCK PROW keyword.
RAPID FIRE
Rapid fire weapons are versatile armaments capable of aimed single shots at long range or controlled bursts of fire at close quarters.
When a model shoots a Rapid Fire weapon, double the number of attacks it makes if its target is within half the weapon’s range.

  • Double number of attacks made if target is within half range.
Fall Back
When a unit Falls Back, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, and when doing so you can move it within Engagement Range of enemy models, but it cannot end its move within Engagement Range of any enemy models – if it cannot do this then it cannot Fall Back. A unit cannot declare a charge in the same turn that it Fell Back. A unit cannot shoot or attempt to manifest a psychic power in the same turn that it Fell Back unless it is TITANIC.

  • Fall Back: Models move up to M".
  • Units that Fall Back cannot charge this turn.
  • Units that Fall Back cannot shoot or manifest psychic powers this turn unless they are TITANIC.
Disembark
If a unit starts its Movement phase embarked within a TRANSPORT model, that unit can disembark in that phase so long as the model itself has not yet made a Normal Move, an Advance or has Fallen Back that phase.

When a unit disembarks, set it up on the battlefield so that it is wholly within 3" of the TRANSPORT model and not within Engagement Range of any enemy models.

Units that disembark can then act normally (move, shoot, charge, fight, etc.) in the remainder of the turn, but its models count as having moved that turn, even if they are not moved further (i.e. they never count as having Remained Stationary).

  • Units that start their Movement phase embarked in a TRANSPORT can disembark this phase.
  • A unit must disembark before their TRANSPORT moves.
  • Disembarking units must be set up wholly within 3" of their TRANSPORT and not within Engagement Range of any enemy models.
  • Units that have disembarked count as having moved this turn.

The SCOURGES keyword is used in the following Drukhari datasheets:

Fast Attack

The VEHICLE keyword is used in the following Drukhari datasheets:

Dedicated Transport
Fortifications

The TRANSPORT keyword is used in the following Drukhari datasheets:

Dedicated Transport
Heavy Support

The DRUKHARI and TRANSPORT keywords are used in the following Drukhari datasheets:

Dedicated Transport
Heavy Support

The RAIDER keyword is used in the following Drukhari datasheets:

Dedicated Transport

The RAVAGER keyword is used in the following Drukhari datasheets:

Heavy Support

The DRUKHARI and SHOCK PROW keywords are used in the following Drukhari datasheets:

Dedicated Transport
Heavy Support

– if equipped with the Shock prow this unit obtains the SHOCK PROW keyword.
© Vyacheslav Maltsev 2013-2021