Drukhari – Cronos
| No | NAME | M | WS | BS | S | T | W | A | Ld | Sv | Base |
75 Cronos (base: 60mm flying base) |
|||||||||||
| 1‑3 | 75 Cronos |
8" | 4+ | 3+ | 5 | 6 | 7 | 4 | 9 | 3+ | 60mm flying base |
If this unit contains 2 models, it has Power Rating 8. If this unit contains 3 models, it has Power Rating 12. Every model is equipped with: spirit syphon; spirit-leech tentacles.
WEAPON | RANGE | TYPE | S | AP | D | ABILITIES |
| Spirit syphon | ||||||
| Spirit syphon | 12" | Assault D6 | 5 | -2 | 1 | Each time an attack is made with this weapon, that attack automatically hits the target. Each time an attack is made with this weapon, on an unmodified wound roll of 6, that attack has a Damage characteristic of 2. |
| Each time an attack is made with this weapon, that attack automatically hits the target. Each time an attack is made with this weapon, on an unmodified wound roll of 6, that attack has a Damage characteristic of 2. | ||||||
+10 Spirit vortex | ||||||
+10 Spirit vortex | 18" | Assault D6 | 5 | -2 | 1 | Blast. Each time an attack is made with this weapon, on an unmodified wound roll of 6, that attack has a Damage characteristic of 2. |
| Blast. Each time an attack is made with this weapon, on an unmodified wound roll of 6, that attack has a Damage characteristic of 2. | ||||||
| Spirit-leech tentacles | ||||||
| Spirit-leech tentacles | Melee | Melee | User | -1 | 1 | Each time an attack is made with this weapon, on an unmodified wound roll of 6, that attack has a Damage characteristic of 2. |
| Each time an attack is made with this weapon, on an unmodified wound roll of 6, that attack has a Damage characteristic of 2. | ||||||
OTHER WARGEAR | ABILITIES | ||||||
+5 Spirit probe | |||||||
The bearer gains the following ability: ‘Spirit Probe (Aura): While a friendly DRUKHARI CORE or DRUKHARI CHARACTER unit is within 6" of the bearer, each time a model in that unit makes a melee attack, you can re-roll a wound roll of 1.’ | |||||||
+5 Spirit probe | The bearer gains the following ability: ‘Spirit Probe (Aura): While a friendly DRUKHARI CORE or DRUKHARI CHARACTER unit is within 6" of the bearer, each time a model in that unit makes a melee attack, you can re-roll a wound roll of 1.’ | ||||||
WARGEAR OPTIONS | |
WARGEAR OPTIONS |
• Any number of models can each be equipped with 1 spirit vortex. • Any number of models can each be equipped with 1 spirit probe.
|
ABILITIES | |
ABILITIES |
Blade Artists, Insensible to Pain, Power From Pain Explodes: Each time a model in this unit is destroyed, roll one D6 before removing it from play. On a 6 it explodes, and each unit within 3" suffers 1 mortal wound. Reservoir of Pain: Each time a model in this unit destroys an enemy model with its spirit-leech tentacles, you can select this unit or one other DRUKHARI CORE unit within 6" of this unit. After this unit has fought, one model in the selected unit regains 1 lost wound (if no models in that unit have lost any wounds, but the unit is not at its Starting Strength, you can instead return 1 destroyed model to that unit with one wound remaining - this model can be set up in Engagement Range of an enemy unit that is already in Engagement Range of the unit it is being returned to). |
| FACTION KEYWORDS: AELDARI, DRUKHARI, | |
| KEYWORDS: MONSTER, CORE, FLY, CRONOS | |
Datasheet-related Stratagems
AN ESOTERIC KILL, DELIVERED FROM AFAR2CP/3CP
The Dark Creed – Battle Tactic Stratagem
The Coven of the Dark Creed have a well-earned reputation for novel methods of assassination.
Use this Stratagem when you select a DARK CREED CORE or DARK CREED CHARACTER unit from your army to shoot with. Until the end of the phase, each time you select a target for an attack made by this unit, you can ignore the Look Out, Sir rule. If the selected unit is a TALOS unit, this Stratagem costs 3CP; otherwise, it costs 2CP.
THE TORTURER’S CRAFT1CP/2CP
Drukhari – Battle Tactic Stratagem
Over long millennia in Commorragh’s undercity, the Haemonculus Covens have perfected the craft of carving flesh.
Use this Stratagem in the Fight phase when URIEN RAKARTH or a unit from your army is selected to fight. Until the end of the phase, each time a model in that unit makes an attack, you can re-roll the wound roll. If this Stratagem is used when a CHARACTER or WRACKS unit that contains 10 or less models is selected to fight, it costs 1CP; otherwise, it costs 2CP.
PAIN SYPHON1CP
Drukhari – Strategic Ploy Stratagem
Cronos parasite engines absorb and magnify the agonies of nearby foes, driving their fellow raiders into a frenzy.
Use this Stratagem when a DRUKHARI unit from your army that is within 6" of a friendly CRONOS unit destroys an enemy unit with a melee or ranged attack. Until the end of the battle, that DRUKHARI unit always treats each battle round as if it is battle round 5 for the purposes of the Power From Pain ability.
NEVER STATIONARY2CP
Drukhari – Strategic Ploy Stratagem
The Drukhari are masters at using hit-and-run tactics, engaging a target with a flurry of shots before quickly manoeuvring into cover or out of sight.
Use this Stratagem in your Shooting phase after making attacks with a DRUKHARI unit (excluding AIRCRAFT units) from your army. That unit can immediately make a Normal Move of up to 7". Until the end of the turn, that unit is not eligible to declare a charge.
PREY ON THE WEAK1CP
Drukhari – Strategic Ploy Stratagem
The scent of a foe in pain draws Drukhari to it like hungry predators to an injured beast, their senses sharpening at its tang.
Use this Stratagem in your Shooting phase or the Fight phase, when a DRUKHARI CORE unit from your army is selected to shoot or fight. Until the end of the phase, each time a model in this unit makes an attack:
- If that attack targets a unit that was below its starting strength when this unit was selected to shoot or fight, re-roll a hit roll of 1.
- If that attack targets a unit that was below Half-strength when this unit was selected to shoot or fight, you can re-roll the hit roll.
ASSAULT
Assault weapons fire so rapidly or indiscriminately that they can be shot from the hip as warriors dash forwards into combat.If a unit includes any models equipped with Assault weapons, that unit is still eligible to shoot with in your Shooting phase even if it has Advanced this turn, but you can only resolve attacks using those Assault weapons when you select that unit to shoot with. If a model shoots an Assault weapon in the same turn in which its unit has Advanced, subtract 1 from hit rolls when resolving that weapon’s attacks.
- Can be shot even if firing model’s unit Advanced.
- Subtract 1 from hit rolls if the firing model’s unit Advanced.
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:- If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
- When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
- Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
- Can never be used to attack units within the firing unit’s Engagement Range.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).
- Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
- No saving throws can be made against mortal wounds.
- Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:
|
If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.
If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).
- Each close combat attack is made with a melee weapon.
- A model makes attacks using the close combat weapon profile if it has no other melee weapons.
- If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.- Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
- A model with an invulnerable save can use it instead of its normal Sv.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.- Engagement Range: 1" horizontally + 5" vertically.
- Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.- Declare targets of the charge (must be within 12").
- Charge roll = 2D6".
- If insufficient to move charging unit into Engagement Range of all targets, charge fails.
- If charge successful, models make their charge move.
- Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.- Advance: Models move up to M+D6".
- Cannot move within Engagement Range of enemy models.
- Units that Advance cannot shoot or charge this turn.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).
- Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
Morale Tests
To take a Morale test, roll one D6 and add the number of models from the unit that have been destroyed this turn. If the result is equal to or less than the highest Leadership (Ld) characteristic in the unit, the Morale test is passed and nothing else happens. An unmodified roll of 1 also always results in a passed Morale test, irrespective of the total result. In any other case, the Morale test is failed, one model flees that unit, and you must then take Combat Attrition tests for the remaining models in the unit. You decide which model from your unit flees – that model is removed from play and counts as having been destroyed, but it never triggers any rules that are used when a model is destroyed.- Morale test = D6 + number of models destroyed this turn.
- Unmodified roll of 1 always a success (no models flee).
- If Morale test exceeds unit’s Ld, one model flees and other models must take Combat Attrition tests.
Power From Pain
As the Drukhari feed on the souls of the slain, they become imbued with supernatural might, eventually turning into killing machines.
This ability only applies if every unit in your army is a DRUKHARI or UNALIGNED unit. At the start of each battle round, this ability gains additional effects. These effects are cumulative.| BATTLE ROUND | ADDITIONAL EFFECT |
| 1+ | Inured to Suffering: Models in this unit have a 6+ invulnerable save. |
| 2+ | Eager to Flay: This unit is eligible to declare a charge in a turn in which they Advanced. |
| 3+ | Flensing Fury: Each time a model in this unit makes a melee attack, add 1 to that attack’s hit roll. If this unit has the VEHICLE or MONSTER keyword, it does not suffer the penalty incurred to its hit rolls for firing Heavy weapons at enemy units that are within Engagement Range of it. |
| 4+ | Mantle of Agony: Models in this unit have a 5+ invulnerable save. |
| 5+ | Emboldened by Bloodshed: Each time a Morale test is taken for this unit, it is automatically passed. If this unit's characteristics can change as it suffers damage, this unit is considered to have double the number of wounds remaining for the purposes of determining what those characteristics are. |
The AELDARI keyword is used in the following Drukhari datasheets:
Elites
Fortifications
The DRUKHARI keyword is used in the following Drukhari datasheets:
Elites
Fortifications
The URIEN RAKARTH keyword is used in the following Drukhari datasheets:
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.- Normal Move: Models move up to M".
- Cannot move within Engagement Range of any enemy models.
Army List
Datasheets collatedElites
Fortifications
The FLY keyword is used in the following Drukhari datasheets:
Troops
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:
| ||||||||||||||
If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Look out, Sir
Models cannot target a unit that contains any CHARACTER models with a Wounds characteristic of 9 or less with a ranged weapon while that CHARACTER unit is within 3" of any of the following:- A friendly unit that contains 1 or more VEHICLE or MONSTER models with a wounds characteristic of 10 or more.
- A friendly non-CHARACTER unit that contains 1 or more VEHICLE or MONSTER models.
- A friendly non-CHARACTER unit that contains 3 or more models.
- Cannot shoot at an enemy CHARACTER with 9 or less wounds while it is within 3" of a friendly unit that contains 1 MONSTER, 1 VEHICLE or 3+ other models (excluding CHARACTER models with 9 or less wounds) unless it is the closest target.
Blade Artists
Every denizen of Commorragh learns from a young age the value of blades, and all are adept in their usage, whether those wielded by their cruel hands or as part of their razor-edged armour.
Each time a model in this unit makes an attack with a melee weapon, on an unmodified wound roll of 6, improve the Armour Penetration characteristic of that attack by 1.Insensible to Pain
The exquisite agonies visited upon the minions of the Haemonculus Covens have ensured that even the lowliest Wrack is oblivious to the most potent of weaponry.
Each time a model in this unit would lose a wound, roll one D6: on a 5+, that wound is not lost.The CORE keyword is used in the following Drukhari datasheets:
The DARK CREED and CORE keywords are used in the following Drukhari datasheets:
Troops
Elites
The DARK CREED and CHARACTER keywords are used in the following Drukhari datasheets:
The TALOS keyword is used in the following Drukhari datasheets:
Heavy Support
The WRACKS keyword is used in the following Drukhari datasheets:
Troops
The DRUKHARI and CORE keywords are used in the following Drukhari datasheets:
This datasheet has Heavy Support Battlefield Role. Full list of Drukhari units sharing same Battlefield Role follows:
The CRONOS keyword is used in the following Drukhari datasheets:
Heavy Support