Death Guard – Hell Talon
| No | NAME | M | WS | BS | S | T | W! | A | Ld | Sv | Base |
210 Hell Talon (base: 120 x 92mm flying base) |
|||||||||||
| 1 | 210 Hell Talon |
20"-60" | 6+ | 3+ | 7 | 7 | 8-14 | 6 | 8 | 3+ | 120 x 92mm flying base |
| 20"-45" | 6+ | 4+ | 7 | 7 | 4-7 | D6 | 8 | 3+ | |||
| 20"-30" | 6+ | 5+ | 7 | 7 | 1-3 | D3 | 8 | 3+ | |||
A Hell Talon is equipped with: autocannon; 2 infernal bombs; twin lascannon.
WEAPON | RANGE | TYPE | S | AP | D | ABILITIES |
| Autocannon | ||||||
| Autocannon | 48" | Heavy 2 | 7 | -1 | 2 | - |
| Havoc launcher | ||||||
| Havoc launcher | 48" | Heavy D6 | 5 | 0 | 1 | Blast |
| Blast | ||||||
| Twin lascannon | ||||||
| Twin lascannon | 48" | Heavy 2 | 9 | -3 | D6 | - |
OTHER WARGEAR | ABILITIES | ||||||
Infernal bomb | |||||||
Once per turn, if the bearer has any infernal bombs remaining, it can drop one of them. Immediately after the bearer has moved, you can select one point on the battlefield the bearer moved across this phase. Roll one D6 for each unit within 6" of that point, subtracting 1 if that model is a CHARACTER (excluding VEHICLE or MONSTER units): on a 4-5, that unit suffers D3 mortal wounds; on a 6, that unit suffers D6 mortal wounds. Each infernal bomb can only be dropped once per battle. | |||||||
Infernal bomb | Once per turn, if the bearer has any infernal bombs remaining, it can drop one of them. Immediately after the bearer has moved, you can select one point on the battlefield the bearer moved across this phase. Roll one D6 for each unit within 6" of that point, subtracting 1 if that model is a CHARACTER (excluding VEHICLE or MONSTER units): on a 4-5, that unit suffers D3 mortal wounds; on a 6, that unit suffers D6 mortal wounds. Each infernal bomb can only be dropped once per battle. | ||||||
WARGEAR OPTIONS | |
WARGEAR OPTIONS |
• This model's autocannon can be replaced with 1 havoc launcher.
|
ABILITIES | |
ABILITIES |
Armour of Contempt Baleful Aberration: This model has a 5+ invulnerable save. Airborne: You cannot declare a charge with this model, and it can only be chosen as a target of a charge if the unit making the charge can FLY. You can only fight with this model if it is within Engagement Range of any enemy units that can FLY, and this model can only make melee attacks against units that can FLY. Enemy units can only make melee attacks against this model if they can FLY. Supersonic: Each time this model makes a Normal Move, Advances or Falls Back, first pivot it on the spot up to 90° (this does not contribute to how far the model moves), then move the model straight forwards. It cannot pivot again after the initial pivot. Hard to Hit: Each time a ranged attack is made against this model, subtract 1 from that attack’s hit roll. Explodes: When this model is destroyed, roll one D6 before removing it from play. On a 6 it explodes, and each unit within 6" suffers D3 mortal wounds. |
| FACTION KEYWORDS: CHAOS, NURGLE, HERETIC ASTARTES, DEATH GUARD, | |
| KEYWORDS: VEHICLE, AIRCRAFT, FLY, HELL TALON, BUBONIC ASTARTES | |
Datasheet-related Stratagems
FERRIC MIASMA1CP
Inexorable – Strategic Ploy Stratagem
As the foe press forward they are engulfed in a whirling storm of fleshrust flakes that clog lungs and eyes.
Use this Stratagem in your opponent’s Charge phase, when an INEXORABLE unit from your army is selected as a target of a charge. Until the end of the phase, subtract 2 from charge rolls made for any unit that declares a charge against that INEXORABLE unit (to a minimum of 1).
RELAPTIC ASSAULT1CP
Mortarion’s Anvil – Strategic Ploy Stratagem
Like a sickness flaring back to life, these stolid warriors erupt from their dug-in positions to counter attack.
Use this Stratagem in your opponent’s Charge phase, when an enemy unit finishes a charge move. Select any number of MORTARION’S ANVIL units from your army within 3" of that enemy unit. Until the end of the phase, the selected units are eligible to perform Heroic Interventions as if they were CHARACTERS.
BLIGHT BOMBARDMENT2CP/3CP
Death Guard – Strategic Ploy Stratagem
Utilising far away artillery, the Death Guard pound an area of the battlefield with flesh-starved blight spores that rampantly spread over any unfortunate enough to be nearby.
Use this Stratagem in your Command phase, if a DEATH GUARD WARLORD from your army is on the battlefield. Select one point on the battlefield and place a marker on that point. At the start of your next Command phase, roll one D6 for each unit within 6" of the centre of that marker, adding 1 if the unit being rolled for is an INFANTRY unit and subtracting 1 if the unit being rolled for is a CHARACTER: on a 2-6, that unit suffers D3 mortal wounds; on a 7+, that unit suffers D6 mortal wounds. The marker is then removed. If your WARLORD has the LORD OF VIRULENCE keyword, this Stratagem costs 2CP; otherwise it costs 3CP. You can only use this Stratagem once.
PUTRID DETONATION1CP/2CP
Death Guard – Strategic Ploy Stratagem
Upon their destruction, the seven-cursed hulls of Death Guard battle tanks have an alarming tendency to burst like ruptured boils, exploding in a swelling mass of pus and foulness.
Use this Stratagem in any phase, when a DEATH GUARD VEHICLE model from your army is destroyed. Do not roll to see if that model explodes: it does so automatically. If that model has a Wounds characteristic of 9 or less, this Stratagem costs 1CP; otherwise, it costs 2CP.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).
- Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
The ASTRA MILITARUM and VEHICLE keywords are used in the following Astra Militarum datasheets:
Dedicated Transport
Fast Attack
Flyers
Heavy Support
The ADEPTUS ASTARTES keyword is used in the following Space Marines datasheets:
HQ
and others...
The SANCTIC ASTARTES keyword is used in the following Grey Knights datasheets:
HQ
Elites
Fast Attack
Heavy Support
Lords of War
The datasheets using HERETIC ASTARTES keyword can be found in the following Factions:
Chaos: Chaos Space Marines, Death Guard, Thousand Sons.The HERETIC ASTARTES keyword is used in the following datasheets:
HQ
and others...
The ADEPTA SORORITAS keyword is used in the following Adepta Sororitas datasheets:
HQ
Elites
Fortifications
The CELESTIAN SACRESANTS keyword is used in the following Adepta Sororitas datasheets:
Elites
The NEMESIS DREADKNIGHT keyword is used in the following Grey Knights datasheets:
Heavy Support
Armour of Contempt
Each time an attack is allocated to an ASTRA MILITARUM VEHICLE, ADEPTUS ASTARTES, SANCTIC ASTARTES, HERETIC ASTARTES or ADEPTA SORORITAS model, worsen the Armour Penetration characteristic of that attack by 1.This rule does not apply to any of the following:
- Models equipped with a storm shield, a relic shield or a combat shield (or a Relic that replaces one of these shields).
- Models with either the Sacresant Shield or Force Shielding ability (CELESTIAN SACRESANT and NEMESIS DREADKNIGHT units).
- Models that are under the effects of any other rule that worsens or reduces the Armour Penetration characteristic of an attack.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.- Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
- A model with an invulnerable save can use it instead of its normal Sv.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).
- Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
- No saving throws can be made against mortal wounds.
- Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
The CHAOS keyword is used in the following Death Guard datasheets:
HQ
Elites
Fast Attack
Flyers
Heavy Support
The NURGLE keyword is used in the following Death Guard datasheets:
HQ
Elites
Fast Attack
Flyers
Heavy Support
The HERETIC ASTARTES keyword is used in the following Death Guard datasheets:
HQ
Troops
Elites
Fast Attack
Flyers
Heavy Support
Lords of War
The DEATH GUARD keyword is used in the following Death Guard datasheets:
HQ
Elites
Fast Attack
Flyers
Heavy Support
The keyword is used in the following Death Guard datasheets:
HQ
Elites
Fast Attack
Flyers
Heavy Support
Lords of War
Fortifications
The VEHICLE keyword is used in the following Death Guard datasheets:
Elites
Fast Attack
Flyers
Heavy Support
Lords of War
Fortifications
The FLY keyword is used in the following Death Guard datasheets:
Flyers
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:- If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
- When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
- Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
- Can never be used to attack units within the firing unit’s Engagement Range.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.- Engagement Range: 1" horizontally + 5" vertically.
- Models cannot be set up within Engagement Range of enemy models.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.- Declare targets of the charge (must be within 12").
- Charge roll = 2D6".
- If insufficient to move charging unit into Engagement Range of all targets, charge fails.
- If charge successful, models make their charge move.
- Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Performing a Heroic Intervention
When a unit performs a Heroic Intervention, you can move each model in that unit up to 3" – this is a Heroic Intervention move. Each model in the unit must finish its Heroic Intervention move closer to the closest enemy model. Remember that a unit must finish any type of move in unit coherency.- Heroic Intervention: Move up to 3".
- Must end closer to the closest enemy model.
Characters
Some models have the CHARACTER keyword. These models can make Heroic Interventions in Charge Phase and are not easy targets in the Shooting Phase (see Look out, Sir, rule). If your Warlord has the CHARACTER keyword he may be able to have a Warlord Trait (see Warlord Trait section on model’s faction page).Note that CHARACTERS cannot use their Aura Abilities while performing actions.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
The LORD OF VIRULENCE keyword is used in the following Death Guard datasheets:
The DEATH GUARD and VEHICLE keywords are used in the following Death Guard datasheets:
Elites
Fast Attack
Flyers
Heavy Support
Lords of War
Fortifications
Army List
Datasheets collatedDedicated Transport
Elites
Fast Attack
Heavy Support
Lords of War
Fortifications
The BUBONIC ASTARTES keyword is used in the following Death Guard datasheets:
HQ
Troops
Elites
Fast Attack
Flyers
Heavy Support
Flying
If a unit’s datasheet has the FLY keyword, then when it makes a Normal Move, an Advance or it Falls Back, its models can be moved across other models (and their bases) as if they were not there, and they can be moved within Engagement Range of enemy models. In addition, any vertical distance up and/or down that they make as part of that move is ignored. However, these models cannot finish their move either on top of another model (or its base) or within Engagement Range of any enemy models.- FLY models can move over other models when they make a Normal Move, an Advance or when they Fall Back.
- FLY models ignore vertical distances when they make a Normal Move, an Advance or when they Fall Back.
Twin lascannon used in the following datasheets:
Lords of War
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.- Advance: Models move up to M+D6".
- Cannot move within Engagement Range of enemy models.
- Units that Advance cannot shoot or charge this turn.
This datasheet has Flyers Battlefield Role. Full list of Death Guard units sharing same Battlefield Role follows:
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.- Normal Move: Models move up to M".
- Cannot move within Engagement Range of any enemy models.
Fall Back
When a unit Falls Back, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, and when doing so you can move it within Engagement Range of enemy models, but it cannot end its move within Engagement Range of any enemy models – if it cannot do this then it cannot Fall Back. A unit cannot declare a charge in the same turn that it Fell Back. A unit cannot shoot or attempt to manifest a psychic power in the same turn that it Fell Back unless it is TITANIC.- Fall Back: Models move up to M".
- Units that Fall Back cannot charge this turn.
- Units that Fall Back cannot shoot or manifest psychic powers this turn unless they are TITANIC.
The AIRCRAFT keyword is used in the following Death Guard datasheets:
Flyers
Havoc launcher used in the following datasheets:
Dedicated Transport
Flyers