Craftworlds – Phoenix
This datasheet does not meet the selection criteria (see Settings tab).
11

Phoenix

NoNAME  M WS BS S T W! A Ld Sv Base
210
Phoenix (base: 120 x 92mm flying base)
1
210
Phoenix
20-60" 6+ 3+ 6 6 9-16 3 8 3+ 120 x 92mm flying base
20-40" 6+ 4+ 6 6 5-8 D3 8 3+
20-25" 6+ 5+ 6 6 1-4 1 8 3+
A Phoenix is equipped with: Phoenix missile array; Phoenix pulse laser; twin shuriken cannon; crystal targeting matrix.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Phoenix missile array
Phoenix missile array
48"
Heavy D6
6
-3
2
Blast
Blast
Phoenix pulse laser
Phoenix pulse laser
48"
Heavy 2
9
-3
3
-
Twin shuriken cannon
Twin shuriken cannon
24"
Assault 6
6
0
1
Each time you make a wound roll of 6+ for this weapon, that hit is resolved with an AP of -3 instead of 0.
Each time you make a wound roll of 6+ for this weapon, that hit is resolved with an AP of -3 instead of 0.
ABILITIES
ABILITIES
Airborne: You cannot declare a charge with this model, and it can only be chosen as a target of a charge if the unit making the charge can FLY. You can only fight with this model if it is within Engagement Range of any enemy units that can FLY, and this model can only make melee attacks against units that can FLY. Enemy units can only make melee attacks against this model if they can FLY.
Hard to Hit: Each time a ranged attack is made against this model, subtract 1 from that attack’s hit roll.
Wings of Khaine: When this model Advances, add 20" to its Move characteristic for that Movement phase instead of rolling a dice. Each time this model moves, first pivot it on the spot up to 90° (this does not contribute to how far the model moves), and then move the model straight forwards. Once its move has finished, you can pivot it a further 90° as before.
Explodes: When this model is destroyed, roll one D6 before removing it from play. On a 6 it explodes, and each unit within 6" suffers D3 mortal wounds.
Crystal targeting matrix: If the bearer Advances, until the end of the turn, the type of any Heavy weapons it is equipped with are changed to Assault (e.g. a Heavy D6 weapon becomes an Assault D6 weapon).
FACTION KEYWORDS: AELDARI, ASURYANI, WARHOST, <CRAFTWORLD>
KEYWORDS: VEHICLE, AIRCRAFT, FLY, PHOENIX

Datasheet-related Stratagems

1CP

CLOUDSTRIKE

Craftworlds Stratagem

The Asuryani often deploy Falcons and Wave Serpents in the lower atmosphere rather than on the ground. At a signal, they strike before the enemy have a chance to react.

Use this Stratagem during deployment if you have not used the Webway Strike Stratagem this battle. You can set up an ASURYANI VEHICLE unit from your army that can FLY in the clouds instead of placing it on the battlefield. It can descend at the end of any of your Movement phases – set it up anywhere on the battlefield more than 9" from any enemy units. If you use this Stratagem on a transport, all units embarked inside it remain so when it is set up in the clouds.
2CP

LIGHTNING-FAST REACTIONS

Craftworlds Stratagem

The Aeldari can process thoughts and emotions with baffling speed, making their physical reactions so fast that it seems they are able to dodge out of the way attacks and blows that would have hit any other target.

Use this Stratagem when a friendly ASURYANI INFANTRY unit, or a friendly ASURYANI UNIT WITH THE FLY keyword, is targeted by a ranged or melee weapon. Subtract 1 from all hit rolls made against that unit for the rest of the phase.

This datasheet has Flyers Battlefield Role. Full list of Craftworlds units sharing same Battlefield Role follows:

HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.

Twin shuriken cannon used in the following datasheets:

Dedicated Transport
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
ASSAULT
Assault weapons fire so rapidly or indiscriminately that they can be shot from the hip as warriors dash forwards into combat.
If a unit includes any models equipped with Assault weapons, that unit is still eligible to shoot with in your Shooting phase even if it has Advanced this turn, but you can only resolve attacks using those Assault weapons when you select that unit to shoot with. If a model shoots an Assault weapon in the same turn in which its unit has Advanced, subtract 1 from hit rolls when resolving that weapon’s attacks.

  • Can be shot even if firing model’s unit Advanced.
  • Subtract 1 from hit rolls if the firing model’s unit Advanced.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Flying
If a unit’s datasheet has the FLY keyword, then when it makes a Normal Move, an Advance or it Falls Back, its models can be moved across other models (and their bases) as if they were not there, and they can be moved within Engagement Range of enemy models. In addition, any vertical distance up and/or down that they make as part of that move is ignored. However, these models cannot finish their move either on top of another model (or its base) or within Engagement Range of any enemy models.

  • FLY models can move over other models when they make a Normal Move, an Advance or when they Fall Back.
  • FLY models ignore vertical distances when they make a Normal Move, an Advance or when they Fall Back.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
© Vyacheslav Maltsev 2013-2021