Chaos Space Marines – Helbrute
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
6

Helbrute

NoNAME  M WS BS S T W A Ld Sv Base
110
Helbrute (base: 60mm)
1
110
Helbrute
8" 3+ 3+ 6 7 8 4 8 3+ 60mm
A Helbrute is a single model equipped with a multi-melta and a Helbrute fist.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
+5
Combi-bolter
+5
Combi-bolter
24"
Rapid Fire 2
4
0
1
-
+10
Heavy flamer
+10
Heavy flamer
12"
Heavy D6
5
-1
1
Each time an attack is made with this weapon, that attack automatically hits the target.
Each time an attack is made with this weapon, that attack automatically hits the target.
Helbrute plasma cannon
Helbrute plasma cannon
36"
Heavy D3
8
-3
2
Blast. Each time an unmodified hit roll of 1 is made for an attack with this weapon, the bearer suffers 1 mortal wound after shooting with this weapon.
Blast. Each time an unmodified hit roll of 1 is made for an attack with this weapon, the bearer suffers 1 mortal wound after shooting with this weapon.
Missile launcher
When attacking with this weapon, choose one of the profiles below.
Missile launcher
When attacking with this weapon, choose one of the profiles below.
 - Frag missile
 - Frag missile
48"
Heavy D6
4
0
1
Blast
Blast
 - Krak missile
 - Krak missile
48"
Heavy 1
8
-2
D6
-
+5
Multi-melta
+5
Multi-melta
24"
Heavy 2
8
-4
D6
Each time an attack made with this weapon targets a unit within half range, that attack has a Damage characteristic of D6+2.
Each time an attack made with this weapon targets a unit within half range, that attack has a Damage characteristic of D6+2.
Reaper autocannon
Reaper autocannon
36"
Heavy 4
7
-2
1
-
+10
Twin heavy bolter
+10
Twin heavy bolter
36"
Heavy 6
5
-1
2
-
+20
Twin lascannon
+20
Twin lascannon
48"
Heavy 2
9
-3
D6
-
Helbrute fist
Helbrute fist
Melee
Melee
x2
-3
3
-
Helbrute hammer
Helbrute hammer
Melee
Melee
x2
-4
D6
When attacking with this weapon, you must subtract 1 from the hit roll.
When attacking with this weapon, you must subtract 1 from the hit roll.
Power scourge
Power scourge
Melee
Melee
+2
-2
2
Each time the bearer fights, it can make 3 additional attacks with this weapon.
Each time the bearer fights, it can make 3 additional attacks with this weapon.
WARGEAR OPTIONS
WARGEAR OPTIONS
 • This model may replace its multi-melta with a second Helbrute fist, or a twin heavy bolter, twin lascannon, Helbrute plasma cannon, or reaper autocannon.
 • This model may replace one Helbrute fist with a missile launcher.
 • This model may replace each Helbrute fist with a Helbrute hammer or power scourge.
 • This model may incorporate a combi-bolter or heavy flamer into each Helbrute fist.
ABILITIES
ABILITIES
Hateful Assault, Malicious Volleys
Crazed: At the end of any phase in which this model suffers any unsaved wounds or mortal wounds, roll a D6. On a roll of 6, this model immediately makes a shooting attack as if it were your Shooting phase if there are no enemies within 1", or piles in and fights as if it were the Fight phase if there are enemies within 1". If there is no visible target within range, nothing happens.
Battering Onslaught: Add 1 to this model’s Attacks characteristic if it is equipped with two melee weapons.
Explodes: If this model is reduced to 0 wounds, roll a D6 before removing the model from the battlefield; on a 6 it explodes, and each unit within 3" suffers D3 mortal wounds.
FACTION KEYWORDS: CHAOS, , HERETIC ASTARTES,
KEYWORDS: VEHICLE, HELBRUTE

Datasheet-related Stratagems

TANK HUNTERS1CP
Iron Warriors – Battle Tactic Stratagem

No armour is safe from the guns of the IV Legion.

Use this Stratagem in your Shooting phase or the Fight phase, when you choose an IRON WARRIORS unit from your army (excluding CHAOS CULTISTS) to shoot or fight with. Select one enemy VEHICLE unit. Until the end of that phase, when resolving an attack made by a model in that IRON WARRIORS unit against the selected unit, you can re-roll the wound roll.
UNHOLY VIGOUR1CP
Iron Warriors – Epic Deed Stratagem

The corrupted machine spirits of the IV refuse to yield.

Use this Stratagem at the start of your Movement phase. Select one IRON WARRIORS VEHICLE model from your army. That model regains up to 3 lost wounds.
1CP

BLASPHEMOUS MACHINES

Chaos Space Marines Stratagem

Heretic Astartes vehicles can be goaded to fury like wild beasts.

Use this Stratagem just before a HERETIC ASTARTES VEHICLE attacks in the Shooting phase. Until the end of the phase, that vehicle can ignore the penalties for moving and firing Heavy weapons, or for Advancing and firing Assault weapons.
1CP

FIRE FRENZY

Chaos Space Marines Stratagem

The unbridled wrath of a Helbrute is a useful tool in the hands of a commander who can direct it.

Use this Stratagem in your Shooting phase, just before a Helbrute shoots. If that Helbrute did not move in its Movement phase, it can fire all of its weapons twice but all of its attacks must target the nearest visible enemy unit.
RAPID FIRE
Rapid fire weapons are versatile armaments capable of aimed single shots at long range or controlled bursts of fire at close quarters.
When a model shoots a Rapid Fire weapon, double the number of attacks it makes if its target is within half the weapon’s range.

  • Double number of attacks made if target is within half range.
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
ASSAULT
Assault weapons fire so rapidly or indiscriminately that they can be shot from the hip as warriors dash forwards into combat.
If a unit includes any models equipped with Assault weapons, that unit is still eligible to shoot with in your Shooting phase even if it has Advanced this turn, but you can only resolve attacks using those Assault weapons when you select that unit to shoot with. If a model shoots an Assault weapon in the same turn in which its unit has Advanced, subtract 1 from hit rolls when resolving that weapon’s attacks.

  • Can be shot even if firing model’s unit Advanced.
  • Subtract 1 from hit rolls if the firing model’s unit Advanced.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.

Multi-melta used in the following datasheets:

Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.

The CHAOS CULTISTS keyword is used in the following Chaos Space Marines datasheets:

Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
Army List
Datasheets collated

The TERMINATOR keyword is used in the following Chaos Space Marines datasheets:

Hateful Assault

The Heretic Astartes are corrupted superhumans with ten thousand years of burning hatred. Few can withstand their hateful assault.

If this unit makes a charge move, is charged or performs a Heroic Intervention, add 1 to the Attacks characteristic of models in this unit until the end of the turn.

The BIKER keyword is used in the following Chaos Space Marines datasheets:

Fast Attack

The HELBRUTE keyword is used in the following Chaos Space Marines datasheets:

Malicious Volleys

To a Heretic Astartes the boltgun is far more than a weapon, it is an instrument of his anger and the bringer of death to his foes.

Instead of following the normal rules for Rapid Fire weapons, models in this unit firing Rapid Fire bolt weapons make double the number of attacks if any of the following apply:
  • The firing model’s target is within half the weapon’s maximum range.
  • The firing model is INFANTRY and every model in its unit remained stationary in your previous Movement phase.
  • The firing model is a TERMINATOR, BIKER or HELBRUTE.
For the purposes of this ability, a Rapid Fire bolt weapon is any bolt weapon with the Rapid Fire type. A bolt weapon is any weapon whose profile includes the word ‘bolt’ (e.g. boltgun, bolt pistol, combi-bolter, Inferno boltgun). Rules that apply to bolt weapons also apply when firing the boltgun profile of combi-weapons and when firing Artefacts of Chaos that replaced a bolt weapon, (e.g. Spitespitter). The Talon of Horus is also a Rapid Fire bolt weapon.

Helbrute plasma cannon used in the following datasheets:

Missile launcher used in the following datasheets:

Heavy Support

– may take Missile launcher as an option.

Reaper autocannon used in the following datasheets:

Heavy Support

Helbrute fist used in the following datasheets:

Helbrute hammer used in the following datasheets:

Power scourge used in the following datasheets:

Pile In
When a unit piles in, you can move each model in that unit up to 3" – this is a pile-in move. Each model in the unit must finish its pile-in move closer to the closest enemy model. A model that is already touching an enemy model cannot move, but still counts as having piled in. Remember that a unit must finish any type of move in unit coherency.

  • Pile in: Move up to 3".
  • Must end closer to the closest enemy model.

The HELBRUTE keyword is used in the following Chaos Space Marines datasheets:

© Vyacheslav Maltsev 2013-2021