Chaos Knights – Renegade Knight
This datasheet does not meet the selection criteria (see Settings tab).
25

Renegade Knight

NoNAME  M WS BS S T W! A Ld Sv
285
Renegade Knight
1
285
Renegade Knight
12" 3+ 3+ 8 8 13-24 4 9 3+
9" 4+ 4+ 8 8 7-12 4 9 3+
6" 5+ 5+ 8 8 1-6 4 9 3+
A Renegade Knight is a single model equipped with a reaper chainsword, thunderstrike gauntlet, heavy stubber and titanic feet.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Avenger gatling cannon
Avenger gatling cannon
36"
Heavy 12
6
-2
2
-
Heavy flamer
Heavy flamer
12"
Heavy D6
5
-1
1
Each time an attack is made with this weapon, that attack automatically hits the target.
Each time an attack is made with this weapon, that attack automatically hits the target.
+5
Heavy stubber
+5
Heavy stubber
36"
Heavy 3
4
0
1
-
+15
Ironstorm missile pod
+15
Ironstorm missile pod
72"
Heavy D6
5
-1
2
Blast. This weapon can target units that are not visible to the bearer.
Blast. This weapon can target units that are not visible to the bearer.
+10
Meltagun
+10
Meltagun
12"
Assault 1
8
-4
D6
Each time an attack made with this weapon targets a unit within half range, that attack has a Damage characteristic of D6+2.
Each time an attack made with this weapon targets a unit within half range, that attack has a Damage characteristic of D6+2.
+100
Rapid-fire battle cannon
+100
Rapid-fire battle cannon
72"
Heavy 2D6
8
-2
D3
Blast
Blast
+45
Stormspear rocket pod
+45
Stormspear rocket pod
48"
Heavy 3
8
-2
D6
-
+75
Thermal cannon
+75
Thermal cannon
36"
Heavy D6
9
-4
D6
Blast. When resolving an attack made with this weapon against a unit that is within half range, roll two D6 when inflicting damage with it and discard one of the results.
Blast. When resolving an attack made with this weapon against a unit that is within half range, roll two D6 when inflicting damage with it and discard one of the results.
+30
Twin Icarus autocannon
+30
Twin Icarus autocannon
48"
Heavy 4
7
-1
2
When resolving an attack made with this weapon, add 1 to the hit roll if the target can FLY; otherwise subtract 1 from the hit roll.
When resolving an attack made with this weapon, add 1 to the hit roll if the target can FLY; otherwise subtract 1 from the hit roll.
+30
Reaper chainsword
+30
Reaper chainsword
Melee
Melee
+6
-3
6
-
+35
Thunderstrike gauntlet
+35
Thunderstrike gauntlet
Melee
Melee
x2
-4
6
When resolving an attack made with this weapon, subtract 1 from the hit roll. When a VEHICLE model or MONSTER model is destroyed as a result of an attack made with this weapon, select one enemy unit within 9" of the bearer and roll one D6; on a 4+ that unit suffers D3 mortal wounds.
When resolving an attack made with this weapon, subtract 1 from the hit roll. When a VEHICLE model or MONSTER model is destroyed as a result of an attack made with this weapon, select one enemy unit within 9" of the bearer and roll one D6; on a 4+ that unit suffers D3 mortal wounds.
Titanic feet
Titanic feet
Melee
Melee
User
-2
D3
Make 3 hit rolls for each attack made with this weapon, instead of 1.
Make 3 hit rolls for each attack made with this weapon, instead of 1.
WARGEAR OPTIONS
WARGEAR OPTIONS
 • This model may take a twin Icarus autocannon, stormspear rocket pod or ironstorm missile pod.
 • This model may replace its thunderstrike gauntlet with an avenger gatling cannon and heavy flamer, rapid-fire battle cannon and heavy stubber, or thermal cannon.
 • This model may replace its reaper chainsword with an avenger gatling cannon and heavy flamer, rapid-fire battle cannon and heavy stubber, or thermal cannon.
 • This model may replace one heavy stubber with a meltagun.
ABILITIES
ABILITIES
Ion Shield: This model has a 5+ invulnerable save against attacks made with ranged weapons.
Explodes: If this model is reduced to 0 wounds, roll a D6 before removing it from the battlefield; on a 6 it explodes, and each unit within 2D6" suffers D6 mortal wounds.
Engine of Destruction: If this model has a reaper chainsword and a thunderstrike gauntlet, its Attacks characteristic is changed to 5 and its Weapon Skill is improved by 1 (e.g. WS 3+ becomes WS 2+).
Super-heavy Walker: This model is eligible to declare a charge in a turn in which it Fell Back. Each time this model makes a Normal Move, Advances or Falls Back, it can be moved across other models (excluding MONSTER and VEHICLE models) as if they were not there, and when it does it can be moved within Engagement Range of such models, but cannot finish its move within Engagement Range of any of them.
FACTION KEYWORDS: CHAOS, CHAOS KNIGHTS, <QUESTOR TRAITORIS>
KEYWORDS: TITANIC, VEHICLE, RENEGADE KNIGHT

Datasheet-related Stratagems

1CP

THUNDERSTOMP

Chaos Knights Stratagem

With the force of an impacting meteoroid, the Chaos Knight brings its foot crashing down to obliterate its foes.

Use this Stratagem immediately after fighting with a TITANIC CHAOS KNIGHTS model from your army. Select one enemy INFANTRY unit or SWARM unit within 1" of that model. Roll one D6; on a 4+ that unit suffers D3 mortal wounds.
1CP

DEVASTATING REACH

Chaos Knights Stratagem

Towering fortifications prove little impediment to the Chaos Knights, who barrel towards such structures in order to loose their rage on the enemies cowering within.

Use this Stratagem before choosing a CHAOS KNIGHTS TITANIC model from your army to charge with. Select one enemy unit that is entirely on or within ruins or a Sector Mechanicus structure, and which has no models on the ground floor; that enemy unit is considered to be within 12" of that model, and must be selected as a target of that model’s charge. If that model can finish its charge move within 2" horizontally and 6" vertically of that enemy unit, the charge is successful; otherwise, the charge fails. If the charge is successful, then until the end of the turn, that model can target that enemy unit and make attacks with melee weapons against that enemy unit as if it were within 1" of it, and when resolving an attack made with titanic feet by that model, do not make a hit roll: that attack automatically fails.

Avenger gatling cannon used in following datasheets:

HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.

Heavy flamer used in following datasheets:

HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
ASSAULT
Assault weapons fire so rapidly or indiscriminately that they can be shot from the hip as warriors dash forwards into combat.
If a unit includes any models equipped with Assault weapons, that unit is still eligible to shoot with in your Shooting phase even if it has Advanced this turn, but you can only resolve attacks using those Assault weapons when you select that unit to shoot with. If a model shoots an Assault weapon in the same turn in which its unit has Advanced, subtract 1 from hit rolls when resolving that weapon’s attacks.

  • Can be shot even if firing model’s unit Advanced.
  • Subtract 1 from hit rolls if the firing model’s unit Advanced.

Rapid-fire battle cannon used in following datasheets:

HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.

Stormspear rocket pod used in following datasheets:

HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.

Thermal cannon used in following datasheets:

HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.

Twin Icarus autocannon used in following datasheets:

Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Flying
If a unit’s datasheet has the FLY keyword, then when it makes a Normal Move, an Advance or it Falls Back, its models can be moved across other models (and their bases) as if they were not there, and they can be moved within Engagement Range of enemy models. In addition, any vertical distance up and/or down that they make as part of that move is ignored. However, these models cannot finish their move either on top of another model (or its base) or within Engagement Range of any enemy models.

  • FLY models can move over other models when they make a Normal Move, an Advance or when they Fall Back.
  • FLY models ignore vertical distances when they make a Normal Move, an Advance or when they Fall Back.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Fall Back
When a unit Falls Back, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, and when doing so you can move it within Engagement Range of enemy models, but it cannot end its move within Engagement Range of any enemy models – if it cannot do this then it cannot Fall Back. A unit cannot declare a charge in the same turn that it Fell Back. A unit cannot shoot or attempt to manifest a psychic power in the same turn that it Fell Back unless it is TITANIC.

  • Fall Back: Models move up to M".
  • Units that Fall Back cannot charge this turn.
  • Units that Fall Back cannot shoot or manifest psychic powers this turn unless they are TITANIC.
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
© Vyacheslav Maltsev 2013-2021