Chaos Daemons – Blood Throne
| No | NAME | M | WS | BS | S | T | W | A | Ld | Sv | Base |
115 Blood Throne (base: 120 x 92mm) |
|||||||||||
| 1 | 115 Blood Throne |
6" | 2+ | 2+ | 5 | 7 | 7 | 5 | 8 | 5+ | 120 x 92mm |
A Blood Throne is a single model. The Rendmaster atop it is armed with a blade of blood, and its attendants are armed with hellblades.
WEAPON | RANGE | TYPE | S | AP | D | ABILITIES |
Rendmaster | ||||||
| Blade of blood | ||||||
| Blade of blood | Melee | Melee | User | -3 | D3 | Each time you make a wound roll of 6+ for this weapon, that hit is resolved with a Damage of 3. |
| Each time you make a wound roll of 6+ for this weapon, that hit is resolved with a Damage of 3. | ||||||
Attendants | ||||||
| Blood Throne’s hellblades | ||||||
| Blood Throne’s hellblades | Melee | Melee | 4 | -3 | 1 | After a Blood Throne makes its close combat attacks, you can attack with its attendants. Make 2 additional attacks, using this weapon profile. Any attacks with a wound roll of 6+ for this weapon have a Damage characteristic of 2. |
| After a Blood Throne makes its close combat attacks, you can attack with its attendants. Make 2 additional attacks, using this weapon profile. Any attacks with a wound roll of 6+ for this weapon have a Damage characteristic of 2. | ||||||
ABILITIES | |
ABILITIES |
Daemonic, Unstoppable Ferocity, Daemonic Ritual Crushing Impact: Each time this model finishes a charge move, roll a D6 for each enemy model within 1" of it; that model’s unit suffers a mortal wound for each roll of 5+. Locus of Khorne: Add 1 to the Strength characteristic of friendly KHORNE DAEMON units within 6" of one or more models with this ability. Gorefeast: If this model slays any models with its Crushing Impact ability, it immediately regains one lost wound. |
| FACTION KEYWORDS: CHAOS, DAEMON, KHORNE | |
| KEYWORDS: CHARACTER, CHARIOT, BLOODLETTER, HERALD OF KHORNE, BLOOD THRONE | |
Datasheet-related Stratagems
1CP | ||
LEGION OF SKULLS Specialist Detachment Stratagem The teeming masses of Khorne’s lesser Daemons can shatter worlds when they are gathered in large numbers. Use this Stratagem when choosing your army. Pick a KHORNE Chaos Daemons Detachment (that is, a Chaos Daemons Detachment in which every unit has the KHORNE keyword) from your army to be a Legion of Skulls Specialist Detachment. BLOODLETTER units in that Detachment gain the LEGION OF SKULLS keyword. | ||
1CP | ||
BOUND IN BRASS AND BONE Khorne Daemons Stratagem Khorne’s constructs manifest as armour-plated horrors, their dense forms proof against the worst attacks. Use this Stratagem in any phase when a BLOODLETTER CHARIOT unit from your army is chosen as the target of an attack. Until the end of the phase, when resolving an attack made against that unit, halve the damage inflicted (rounding up). | ||
2CP | ||
SOUL SACRIFICE Chaos Daemons Stratagem A daemonic pact of terrible power can be assured for a price… Use this Stratagem before a CHAOS CHARACTER from your army attempts to summon a unit of DAEMONS to the battlefield using a Daemonic Ritual. That character suffers D3 mortal wounds, but you can roll up to 4 dice rather than 3 for the summoning roll. In addition, re-roll hit rolls of 1 for the summoned unit while it is within 6" of the character that performed the Daemonic Ritual. | ||
1CP/3CP | ||
REWARDS OF CHAOS Chaos Daemons Stratagem The Dark Gods sometimes bestow their daemonic lieutenants with powerful artefacts and rewards. Use this Stratagem before the battle. Your army can have one extra Hellforged Artefact for 1 CP, or two extra Hellforged Artefacts for 3 CPs. All of the Hellforged Artefacts that you include must be different and be given to different DAEMON CHARACTERS. You can only use this Stratagem once per battle. | ||
1CP | ||
DAEMONIC PACT Chaos Daemons Stratagem Many foul champions are adept at summoning daemonic allies. Use this Stratagem after a CHAOS CHARACTER from your army summons a unit of DAEMONS to the battlefield using a Daemonic Ritual. That character can immediately attempt to summon a second unit of Daemons to the battlefield by performing another Daemonic Ritual. | ||
2CP | ||
LOCUS OF WRATH Khorne Daemons Stratagem Khorne’s wrath empowers those who fight beside his champions. Use this Stratagem at the start of any Fight phase. Select a KHORNE DAEMON CHARACTER from your army – until the end of the phase you can re-roll any failed hit rolls made for friendly KHORNE DAEMON units within 6" of that model. | ||
This datasheet has HQ Battlefield Role. Full list of Chaos Daemons units sharing same Battlefield Role follows:
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:
|
If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.
If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).
- Each close combat attack is made with a melee weapon.
- A model makes attacks using the close combat weapon profile if it has no other melee weapons.
- If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Daemonic
The denizens of the warp do not have a true physical form; they are beings of energy, given fell shape and terrible purpose. Such a creature defies the natural laws of the universe, and many of the most powerful weapons are all but useless against them.
Units with this ability have a 5+ invulnerable save.The CHAOS and CHARACTER keywords are used in the following Chaos Daemons datasheets:
HQ
Elites
The KHORNE keyword is used in the following Chaos Daemons datasheets:
HQ
Troops
Elites
Lords of War
Fortifications
The TZEENTCH keyword is used in the following Chaos Daemons datasheets:
HQ
Troops
Lords of War
The NURGLE keyword is used in the following Chaos Daemons datasheets:
HQ
Elites
Lords of War
Fortifications
The SLAANESH keyword is used in the following Chaos Daemons datasheets:
HQ
Troops
Elites
Lords of War
The CHARACTER and KHORNE keywords are used in the following Chaos Daemons datasheets:
HQ
Lords of War
The KHORNE and DAEMON keywords are used in the following Chaos Daemons datasheets:
HQ
Troops
Elites
Lords of War
Fortifications
Daemonic Ritual
Through dark pacts and blasphemous rituals, a champion of Chaos can weaken the fabric of reality to create a gateway to the warp. From this rent pour forth the Daemons of that realm, ready to rend and tear those who stand against the Ruinous Powers.
Instead of moving in their Movement phase, any CHAOS CHARACTER can, at the end of their Movement phase, attempt to summon a DAEMON unit with this ability by performing a Daemonic Ritual (the character cannot do so if they arrived as reinforcements this turn, or if they were themselves summoned to the battlefield this turn).If they do so, first choose one of the four Chaos Gods – KHORNE, TZEENTCH, NURGLE or SLAANESH. A CHARACTER who owes allegiance to one of the Dark Gods can only attempt to summon the units of their patron – for example, a KHORNE CHARACTER could only attempt to summon KHORNE DAEMONS.
Roll up to 3 dice – this is your summoning roll. You can summon one new unit with the Daemonic Ritual ability to the battlefield that has a Power Rating equal to or less than the total result so long as it has the same Chaos God keyword you chose at the start (in the case of units that have a choice of allegiance, such as Furies, the unit when summoned will have this keyword). This unit is treated as reinforcements for your army and can be placed anywhere on the battlefield that is wholly within 12" of the character and more than 9" from any enemy model. If the total rolled is insufficient to summon any unit, the ritual fails and no new unit is summoned.
If your summoning roll included any doubles, your character then suffers a mortal wound. If it contained any triples, it instead suffers D3 mortal wounds.
The CHAOS keyword is used in the following Chaos Daemons datasheets:
HQ
Fast Attack
The DAEMON keyword is used in the following Chaos Daemons datasheets:
HQ
Heavy Support
The CHARACTER keyword is used in the following Chaos Daemons datasheets:
HQ
Elites
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).
- Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
- No saving throws can be made against mortal wounds.
- Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
The DAEMON and CHARACTER keywords are used in the following Chaos Daemons datasheets:
HQ
Elites
Army List
Datasheets collatedHeavy Support
Fortifications
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:
| ||||||||||||||
If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.- Engagement Range: 1" horizontally + 5" vertically.
- Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.- Declare targets of the charge (must be within 12").
- Charge roll = 2D6".
- If insufficient to move charging unit into Engagement Range of all targets, charge fails.
- If charge successful, models make their charge move.
- Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
The CHARIOT keyword is used in the following Chaos Daemons datasheets:
HQ
Fast Attack
The KHORNE keyword is used in the following Chaos Daemons datasheets:
HQ
Troops
Elites
Lords of War
Fortifications
Unstoppable Ferocity
Khorne Daemons hunger to spill blood and claim skulls, and their fury in the midst of battle is without limit.
If this unit makes a charge move, is charged, or performs a Heroic Intervention, then until the end of the turn add 1 to the Attacks characteristic of all its models and add 1 to the Strength characteristic of all the melee weapons the unit is armed with.The DAEMON, KHORNE and CHARACTER keywords are used in the following Chaos Daemons datasheets:
HQ
Lords of War
The BLOODLETTER keyword is used in the following Chaos Daemons datasheets:
Troops
Elites
Heavy Support
The BLOODLETTER keyword is used in the following Chaos Daemons datasheets:
Troops
Elites
Heavy Support
The HERALD OF KHORNE keyword is used in the following Chaos Daemons datasheets:
Blade of blood used in the following datasheets:
The BLOODLETTER and CHARIOT keywords are used in the following Chaos Daemons datasheets:
Heavy Support