Astra Militarum – Tech-Priest Enginseer
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
2

Tech-Priest Enginseer

NoNAME MWSBSSTWALdSvBase
35
Tech-Priest Enginseer (base: 32mm)
1
35
Tech-Priest Enginseer
6"4+4+444283+32mm
A Tech-Priest Enginseer is a single model armed with an Omnissian axe, a laspistol and a servo-arm.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Laspistol
Laspistol
12"
Pistol 1
3
0
1
-
Omnissian axe
Omnissian axe
Melee
Melee
+1
-2
2
-
Servo-arm
Servo-arm
Melee
Melee
x2
-2
3
Each servo-arm can only be used to make one attack each time this model fights. When a model attacks with this weapon, you must subtract 1 from the hit roll.
Each servo-arm can only be used to make one attack each time this model fights. When a model attacks with this weapon, you must subtract 1 from the hit roll.
ABILITIES
ABILITIES
Unquestioning Loyalty
Bionics: This model has a 6+ invulnerable save.
Master of Machines: At the end of your Movement phase this model can repair a single friendly <FORGE WORLD> VEHICLE, ASTRA MILITARUM VEHICLE or QUESTOR MECHANICUS model within 3". If the model being repaired is a <FORGE WORLD> or ASTRA MILITARUM model, it regains D3 lost wounds; if it is a QUESTOR MECHANICUS model, it regains 1 lost wound. A model may not be the target of the Master of Machines ability more than once per turn.

Designer’s Note: When selecting this unit for your army, choose which forge world it will be from. This replaces the <FORGE WORLD> keyword in all instances on this datasheet.
FACTION KEYWORDS: IMPERIUM, ASTRA MILITARUM, CULT MECHANICUS, <FORGE WORLD>, BROOD BROTHERS
KEYWORDS: CHARACTER, INFANTRY, TECH-PRIEST, ENGINSEER

Datasheet-related Stratagems

1CP/3CP

IMPERIAL COMMANDER’S ARMOURY

Astra Militarum Stratagem

By leveraging their considerable influence upon the Departmento Munitorum, high-ranking Imperial commanders can secure vital resources for their military campaigns.

Use this Stratagem before the battle. Your army can have one extra relic from the Heirlooms of Conquest for 1 CP, or two extra relics for 3 CPs. All of the relics that you include must be different and be given to different ASTRA MILITARUM CHARACTERS. You can only use this Stratagem once per battle.
1CP

TAKE COVER!

Astra Militarum Stratagem

Sometimes the only possible response to overwhelming enemy fire is to hit the dirt and wait for the storm to pass, before springing up to unleash an answering volley.

Use this Stratagem in your opponent’s Shooting phase when your opponent selects one of your ASTRA MILITARUM INFANTRY units as a target. You can add 1 to armour saving throws you make for this unit until the end of the phase.
1CP

FIGHT TO THE DEATH

Astra Militarum Stratagem

They may be mere mortals in a galaxy of gods and monsters, but the soldiers of the Astra Militarum stand tall in the face of obliteration, lasguns blazing.

Use this Stratagem at the start of the Morale phase. Pick an ASTRA MILITARUM INFANTRY unit from your army that is required to take a Morale test. You can roll a D3 for the unit, rather than a D6, when taking this test.
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Unquestioning Loyalty

So fanatically devoted are Genestealer Cultists that they would die for their masters.

Each time you fail a saving throw for a <CULT> CHARACTER model, and each time a <CULT> CHARACTER model suffers a mortal wound, before inflicting damage check to see if it is within 3" of any friendly <CULT> or BROOD BROTHERS units with this ability. If it is, you can select one of those units and roll a D6; on a 4+ you do not inflict any damage on the character, but one model in the selected unit (your choice) is slain. Otherwise, the character suffers damage as normal.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.

The <FORGE WORLD> keyword is used in the following Astra Militarum datasheets:

Morale Tests
To take a Morale test, roll one D6 and add the number of models from the unit that have been destroyed this turn. If the result is equal to or less than the highest Leadership (Ld) characteristic in the unit, the Morale test is passed and nothing else happens. An unmodified roll of 1 also always results in a passed Morale test, irrespective of the total result. In any other case, the Morale test is failed, one model flees that unit, and you must then take Combat Attrition tests for the remaining models in the unit. You decide which model from your unit flees – that model is removed from play and counts as having been destroyed, but it never triggers any rules that are used when a model is destroyed.

  • Morale test = D6 + number of models destroyed this turn.
  • Unmodified roll of 1 always a success (no models flee).
  • If Morale test exceeds unit’s Ld, one model flees and other models must take Combat Attrition tests.
Army List
Datasheets collated
© Vyacheslav Maltsev 2013-2021