Astra Militarum – Rein and Raus
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
2

Rein and Raus

NoNAME  M WS BS S T W A Ld Sv Base
Rein (base: 25mm)
1Rein 6" 5+ 2+ 2 2 2 1 6 6+ 25mm
Raus (base: 25mm)
1Raus 6" 5+ 2+ 2 2 2 1 6 6+ 25mm
This unit contains two models, Rein and Raus. Rein is armed with a sniper rifle and stub pistol. Raus is armed with a stub pistol and demolition charge. Only one of this unit can be included in your army.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Sniper rifle
Sniper rifle
36"
Heavy 1
4
0
1
Each time you select a target for this weapon, you can ignore the Look Out, Sir rule. Each time an attack is made with this weapon, an unmodified wound roll of 6 inflicts 1 mortal wound on the target in addition to any normal damage.
Each time you select a target for this weapon, you can ignore the Look Out, Sir rule. Each time an attack is made with this weapon, an unmodified wound roll of 6 inflicts 1 mortal wound on the target in addition to any normal damage.
Stub pistol
Stub pistol
9"
Pistol 1
4
0
1
-
Demolition charge
Demolition charge
6"
Grenade D6
8
-3
D3
Blast. The bearer can only shoot with this weapon once per battle.
Blast. The bearer can only shoot with this weapon once per battle.
ABILITIES
ABILITIES
Unquestioning Loyalty
Find the Best Spot: When you set up this unit during deployment, it can be set up anywhere on the battlefield that is more than 18" away from the enemy deployment zone and any enemy models.
Shoot Sharp and Scarper: Immediately after making a shooting attack with Rein or Raus (other than firing Overwatch), that model can move as if it were the Movement phase (though it cannot Advance as part of this move).
Naturally Stealthy: Each time a ranged attack is allocated to a model in this unit while it is receiving the benefits of cover, add an additional 1 to any armour saving throw made against that attack.
You Go High, I’ll Go Low: The first time this unit is set up on the battlefield, both models must be placed in unit coherency with each other. From that point onwards, each operates independently and is treated as a separate unit.
Grappling Hook: When moving with Raus, do not count any vertical distance he moves against the total he can move that turn (i.e. moving vertically is free for this model).
The Ratling Twins: You can re-roll failed hit and wound rolls when shooting with Reins sniper rifle if the target is also visible to Raus.
FACTION KEYWORDS: IMPERIUM, ASTRA MILITARUM, MILITARUM AUXILLA, BROOD BROTHERS
KEYWORDS (Rein): CHARACTER, INFANTRY, RATLING, REIN
KEYWORDS (Raus): CHARACTER, INFANTRY, RATLING, RAUS

Datasheet-related Stratagems

1CP

TAKE COVER!

Astra Militarum Stratagem

Sometimes the only possible response to overwhelming enemy fire is to hit the dirt and wait for the storm to pass, before springing up to unleash an answering volley.

Use this Stratagem in your opponent’s Shooting phase when your opponent selects one of your ASTRA MILITARUM INFANTRY units as a target. You can add 1 to armour saving throws you make for this unit until the end of the phase.
1CP

GRENADIERS

Astra Militarum Stratagem

Against packed formations of enemy infantry, a favoured tactic of Astra Militarum assault troops is to hurl an opening salvo of grenades en masse.

Use this Stratagem before an ASTRA MILITARUM INFANTRY unit from your army shoots or fires Overwatch. Up to ten models in the unit that are armed with grenades can throw a grenade this phase, instead of only one model being able to do so.
1CP

FIGHT TO THE DEATH

Astra Militarum Stratagem

They may be mere mortals in a galaxy of gods and monsters, but the soldiers of the Astra Militarum stand tall in the face of obliteration, lasguns blazing.

Use this Stratagem at the start of the Morale phase. Pick an ASTRA MILITARUM INFANTRY unit from your army that is required to take a Morale test. You can roll a D3 for the unit, rather than a D6, when taking this test.
Price per unit
Look out, Sir
Models cannot target a unit that contains any CHARACTER models with a Wounds characteristic of 9 or less with a ranged weapon while that CHARACTER unit is within 3" of any of the following:
  • A friendly unit that contains 1 or more VEHICLE or MONSTER models with a wounds characteristic of 10 or more.
  • A friendly non-CHARACTER unit that contains 1 or more VEHICLE or MONSTER models.
  • A friendly non-CHARACTER unit that contains 3 or more models.
In all cases, if that CHARACTER unit is both visible to the firing model and it is the closest enemy unit to the firing model, it can be targeted normally. When determining if that CHARACTER unit is the closest enemy unit to the firing model, ignore other enemy units that contain any CHARACTER models with a Wounds characteristics of 9 or less.

  • Cannot shoot at an enemy CHARACTER with 9 or less wounds while it is within 3" of a friendly unit that contains 1 MONSTER, 1 VEHICLE or 3+ other models (excluding CHARACTER models with 9 or less wounds) unless it is the closest target.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
HEAVY
Heavy weapons are amongst the biggest guns on the battlefield, but they require bracing to fire at full effect and are unwieldy to bring to bear at close quarters.
When an INFANTRY model shoots a Heavy weapon, subtract 1 from the hit rolls when resolving that weapon’s attacks if the firing model’s unit has moved for any reason this turn (e.g. it made a Normal Move this turn).

  • Subtract 1 from hit rolls if firing model is INFANTRY and its unit has moved this turn.
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.

Demolition charge used in following datasheets:

Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.

The <CULT> and CHARACTER keywords are used in following Genestealer Cults datasheets:

Unquestioning Loyalty

So fanatically devoted are Genestealer Cultists that they would die for their masters.

Each time you fail a saving throw for a <CULT> CHARACTER model, and each time a <CULT> CHARACTER model suffers a mortal wound, before inflicting damage check to see if it is within 3" of any friendly <CULT> or BROOD BROTHERS units with this ability. If it is, you can select one of those units and roll a D6; on a 4+ you do not inflict any damage on the character, but one model in the selected unit (your choice) is slain. Otherwise, the character suffers damage as normal.
Overwatch
Certain rules enable units to fire Overwatch at an enemy unit before it can charge. If an enemy unit declares a charge that targets one or more units from your army that have such a rule, each of those units can fire Overwatch before the charge roll is made. A unit cannot fire Overwatch if there are any enemy units within Engagement Range of it. Overwatch is resolved like a normal shooting attack (albeit one resolved in the Charge phase) and uses all the normal rules, except that an unmodified hit roll of 6 is always required for a successful hit roll, irrespective of the firing model’s Ballistic Skill or any hit roll modifiers. In addition, when a model fires Overwatch, it does so at the charging unit. Any rule that states the unit cannot be targeted unless it is the closest target (e.g. Look Out, Sir) does not apply when firing Overwatch.

  • Overwatch: Before charge roll made, all charge targets that can fire Overwatch can do so.
  • Can never fire Overwatch while enemy units are in Engagement Range.
  • When firing Overwatch, shoot with unit, but attacks only hit on unmodified 6s.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Unit Coherency
A unit that has more than one model must be set up and finish any sort of move as a single group, with all models within 2" horizontally and 5" vertically of at least one other model from their unit. While a unit has six or more models, all models must instead be within 2" horizontally and 5" vertically of at least two other models from their unit. This is called unit coherency. If a unit cannot end any kind of move in unit coherency, that move cannot be made. Units are primarily moved in the Movement phase, but they can also be moved in the Charge phase and the Fight phase.

Some rules allow you to add models to a unit during the battle; such models must always be set up in unit coherency with the unit they are being added to. Sometimes there will be insufficient room to set up all the models from a unit, or it will not be possible to set up all the models so that they are in unit coherency. When this is the case, any models that cannot be set up are considered to have been destroyed.

  • Unit coherency: 2" horizontally + 5" vertically.
  • Each model must be in unit coherency with one other model from own unit.
  • While unit has 6+ models, each model must be in unit coherency with 2 other models from own unit.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.

The MILITARUM AUXILLA keyword is used in following Astra Militarum datasheets:

The RATLING keyword is used in following Astra Militarum datasheets:

Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
Morale Tests
To take a Morale test, roll one D6 and add the number of models from the unit that have been destroyed this turn. If the result is equal to or less than the highest Leadership (Ld) characteristic in the unit, the Morale test is passed and nothing else happens. An unmodified roll of 1 also always results in a passed Morale test, irrespective of the total result. In any other case, the Morale test is failed, one model flees that unit, and you must then take Combat Attrition tests for the remaining models in the unit. You decide which model from your unit flees – that model is removed from play and counts as having been destroyed, but it never triggers any rules that are used when a model is destroyed.

  • Morale test = D6 + number of models destroyed this turn.
  • Unmodified roll of 1 always a success (no models flee).
  • If Morale test exceeds unit’s Ld, one model flees and other models must take Combat Attrition tests.
Army List
Datasheets collated
© Vyacheslav Maltsev 2013-2021