Astra Militarum – Ministorum Priest
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
2

Ministorum Priest

NoNAME  M WS BS S T W A Ld Sv
40
Ministorum Priest
1
40
Ministorum Priest
6" 4+ 4+ 3 3 4 3 7 6+
A Ministorum Priest is a single model armed with a laspistol, frag grenades and krak grenades.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Autogun
Autogun
24"
Rapid Fire 1
3
0
1
-
Laspistol
Laspistol
12"
Pistol 1
3
0
1
-
Chainsword
Chainsword
Melee
Melee
User
0
1
When the bearer fights, it makes 1 additional attack with this weapon.
When the bearer fights, it makes 1 additional attack with this weapon.
Frag grenade
Frag grenade
6"
Grenade D6
3
0
1
Blast
Blast
Krak grenade
Krak grenade
6"
Grenade 1
6
-1
D3
-
WARGEAR OPTIONS
WARGEAR OPTIONS
 • This model may take an autogun.
 • This model may take a chainsword.
ABILITIES
ABILITIES
Zealot: You can re-roll failed hit rolls for this unit in a turn in which it charged, made a heroic intervention, or was charged by an enemy unit.
Rosarius: This model has a 4+ invulnerable save.
War Hymns: You can add 1 to the Attacks characteristic of all models in ADEPTUS MINISTORUM INFANTRY and ASTRA MILITARUM INFANTRY units that are within 6" of any friendly MINISTORUM PRIESTS.
FACTION KEYWORDS: IMPERIUM, ASTRA MILITARUM, ADEPTUS MINISTORUM
KEYWORDS: CHARACTER, INFANTRY, MINISTORUM PRIEST

Datasheet-related Stratagems

1CP

EMPEROR’S CONCLAVE INFANTRY COMPANY

Specialist Detachment Stratagem

Regiments raised from shrine worlds and other centres of the Imperial Creed have an unshakeable faith in the Emperor.

Use this Stratagem when choosing your army. Pick an ASTRA MILITARUM Detachment from your army to be an Emperor’s Conclave Specialist Detachment. COMPANY COMMANDERS, PLATOON COMMANDERS, COMMAND SQUADS, INFANTRY SQUADS, CONSCRIPTS, MINISTORUM PRIESTS and CRUSADERS units in that Detachment gain the EMPEROR’S CONCLAVE keyword.
1CP

SANCTIMONIOUS CHARGE

Astra Militarum Stratagem

Singing a glorious hymn to the Emperor’s divine power, these soldiers fear not the alien or the heretic as they fix bayonets and charge into the fray.

Use this Stratagem after an EMPEROR’S CONCLAVE MINISTORUM PRIEST makes a charge move. Until the end of that phase, add 1 to charge rolls for other friendly EMPEROR’S CONCLAVE units while they are within 12" of that MINISTORUM PRIEST.
1CP/3CP

IMPERIAL COMMANDER’S ARMOURY

Astra Militarum Stratagem

By leveraging their considerable influence upon the Departmento Munitorum, high-ranking Imperial commanders can secure vital resources for their military campaigns.

Use this Stratagem before the battle. Your army can have one extra relic from the Heirlooms of Conquest for 1 CP, or two extra relics for 3 CPs. All of the relics that you include must be different and be given to different ASTRA MILITARUM CHARACTERS. You can only use this Stratagem once per battle.
1CP

TAKE COVER!

Astra Militarum Stratagem

Sometimes the only possible response to overwhelming enemy fire is to hit the dirt and wait for the storm to pass, before springing up to unleash an answering volley.

Use this Stratagem in your opponent’s Shooting phase when your opponent selects one of your ASTRA MILITARUM INFANTRY units as a target. You can add 1 to armour saving throws you make for this unit until the end of the phase.
1CP

FIGHT TO THE DEATH

Astra Militarum Stratagem

They may be mere mortals in a galaxy of gods and monsters, but the soldiers of the Astra Militarum stand tall in the face of obliteration, lasguns blazing.

Use this Stratagem at the start of the Morale phase. Pick an ASTRA MILITARUM INFANTRY unit from your army that is required to take a Morale test. You can roll a D3 for the unit, rather than a D6, when taking this test.
RAPID FIRE
Rapid fire weapons are versatile armaments capable of aimed single shots at long range or controlled bursts of fire at close quarters.
When a model shoots a Rapid Fire weapon, double the number of attacks it makes if its target is within half the weapon’s range.

  • Double number of attacks made if target is within half range.
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Performing a Heroic Intervention
When a unit performs a Heroic Intervention, you can move each model in that unit up to 3" – this is a Heroic Intervention move. Each model in the unit must finish its Heroic Intervention move closer to the closest enemy model. Remember that a unit must finish any type of move in unit coherency.

  • Heroic Intervention: Move up to 3".
  • Must end closer to the closest enemy model.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.

The ADEPTUS MINISTORUM and INFANTRY keywords are used in following Astra Militarum datasheets:

The MINISTORUM PRIEST keyword is used in following Astra Militarum datasheets:

The ADEPTUS MINISTORUM keyword is used in following Astra Militarum datasheets:

The COMPANY COMMANDER keyword is used in following Astra Militarum datasheets:

The PLATOON COMMANDER keyword is used in following Astra Militarum datasheets:

The COMMAND SQUAD keyword is used in following Astra Militarum datasheets:

The INFANTRY SQUAD keyword is used in following Astra Militarum datasheets:

The CONSCRIPTS keyword is used in following Astra Militarum datasheets:

The MINISTORUM PRIEST keyword is used in following Astra Militarum datasheets:

The CRUSADERS keyword is used in following Astra Militarum datasheets:

The MINISTORUM PRIEST keyword is used in following Astra Militarum datasheets:

Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Morale Tests
To take a Morale test, roll one D6 and add the number of models from the unit that have been destroyed this turn. If the result is equal to or less than the highest Leadership (Ld) characteristic in the unit, the Morale test is passed and nothing else happens. An unmodified roll of 1 also always results in a passed Morale test, irrespective of the total result. In any other case, the Morale test is failed, one model flees that unit, and you must then take Combat Attrition tests for the remaining models in the unit. You decide which model from your unit flees – that model is removed from play and counts as having been destroyed, but it never triggers any rules that are used when a model is destroyed.

  • Morale test = D6 + number of models destroyed this turn.
  • Unmodified roll of 1 always a success (no models flee).
  • If Morale test exceeds unit’s Ld, one model flees and other models must take Combat Attrition tests.
Army List
Datasheets collated
© Vyacheslav Maltsev 2013-2021