Adeptus Mechanicus – Fulgurite Electro-Priests
This datasheet does not meet the selection criteria (see Settings tab).
3

Fulgurite Electro-Priests

NoNAME  M WS BS S T W A Ld Sv
15
Fulgurite Electro-Priest
5‑20
15
Fulgurite Electro-Priest
6" 3+ 4+ 3 3 1 2 8 6+
If this unit contains between 6 and 10 models, it has Power Rating 6. If this unit contains between 11 and 15 models, it has Power Rating 9. If this unit contains 16 or more models, it has Power Rating 12. Every model is equipped with: electroleech stave.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Electroleech stave
Electroleech stave
Melee
Melee
+2
-2
2
Each time an attack is made with this weapon, an unmodified wound roll of 6 inflicts 2 mortal wounds on the target and the attack sequence ends.
Each time an attack is made with this weapon, an unmodified wound roll of 6 inflicts 2 mortal wounds on the target and the attack sequence ends.
ABILITIES
ABILITIES
Canticles of the Omnissiah
Voltagheist Field: Models in this unit have a 5+ invulnerable save.
Voltagheist Blast: After this unit finishes a charge move, select one enemy unit within Engagement Range of this unit and roll one D6 for each model from this unit that is within Engagement Range of that enemy unit: for each 6+, that enemy unit suffers 1 mortal wound.
Fanatical Devotion: Each time a model in this unit would lose a wound, roll one D6: on a 5+, that wound is not lost.
Siphoned Vigour: When this unit destroys an enemy unit for the first time, until the end of the battle:
  • Add 1 to rolls made for this unit’s Voltagheist Blast ability.
  • Models in this unit have a 4+ invulnerable save.
FACTION KEYWORDS: IMPERIUM, ADEPTUS MECHANICUS, CULT MECHANICUS, <FORGE WORLD>
KEYWORDS: INFANTRY, CORE, ELECTRO-PRIESTS, FULGURITE ELECTRO-PRIESTS

Datasheet-related Stratagems

ZEALOUS CONGREGATION2CP
Adeptus Mechanicus – Battle Tactic Stratagem

The channelling of inspiring verses of zealotry allows Electro-Priests to release the pent-up energy within them.

Use this Stratagem in the Fight phase, when an ELECTRO-PRIESTS unit from your army is selected to fight. Until the end of the phase, each time a model in that unit makes an attack, an unmodified hit roll of 6 automatically wounds the target.
ELECTROMANCER’S WRATH1CP
Adeptus Mechanicus – Battle Tactic Stratagem

By chanting fiery psalms in praise of the Motive Force, Electro-Priests inflame the potential of their charged fields.

Use this Stratagem in your Shooting phase. Select one enemy unit (excluding VEHICLE units) within 12" of an ELECTRO-PRIESTS unit from your army. Roll one D6, subtracting 1 if the unit being rolled for has the CHARACTER keyword: on a 2-5, that enemy unit suffers D3 mortal wounds; on a 6, it suffers 2D3 mortal wounds.
ELECTRO-SHOCKED1CP
Adeptus Mechanicus – Strategic Ploy Stratagem

The truly devout can send a sudden charge of the Motive Force pulsing through their numerous augmentations, stunning nearby foes.

Use this Stratagem at the start of the Fight phase. Select one enemy unit (excluding VEHICLE or MONSTER units) within Engagement Range of a CULT MECHANICUS CORE or CULT MECHANICUS CHARACTER unit from your army. Until the end of the phase, that enemy unit is not eligible to fight until after all eligible units from your army have done so.
CLANDESTINE INFILTRATION1CP
Stygies VIII – Wargear Stratagem

Under cover of stealth screens and auspex scramblers, the warriors of Stygies VIII confound their foes.

Use this Stratagem during deployment. Select one STYGIES VIII CORE INFANTRY unit from your army. When you set up that unit, it can be set up anywhere on the battlefield that is more than 9" away from the enemy deployment zone and any enemy models.
INFOSLAVE SKULL2CP
Adeptus Mechanicus – Wargear Stratagem

Mono-task infoslave skulls make ideal lookouts to watch against the sudden deployment of enemy troops.

Use this Stratagem at the end of the Reinforcements step of your opponent’s Movement phase. Select one ADEPTUS MECHANICUS CORE unit from your army that is not within Engagement Range of any enemy units. That unit can shoot as if it were your Shooting phase, but its models can only target a single eligible enemy unit that was set up as Reinforcements this turn and that is within 12" of their unit when doing so.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Light Cover
When an attack made with a ranged weapon wounds a model that is receiving the benefits of cover from this terrain feature, add 1 to the saving throw made against that attack (invulnerable saving throws are not affected).

  • +1 to saving throws against ranged weapons.
  • Invulnerable saving throws unaffected.
Combat Attrition Tests
If a unit fails a Morale test, then after the first model has fled the unit, you must take Combat Attrition tests. To do so, roll one D6 for each remaining model in that unit, subtracting 1 from the result if the unit is below Half-strength; for each result of 1, one additional model flees that unit. You decide which models from your unit flee – those models are removed from play and count as having been destroyed, but they never trigger any rules that are used when a model is destroyed.

  • Combat Attrition tests: Roll one D6 for each remaining model in unit; for each 1, one additional model flees.
  • Subtract 1 from Combat Attrition tests if unit is below Half-strength.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Canticles of the Omnissiah
If every unit from your army has the ADEPTUS MECHANICUS keyword (excluding AGENT OF THE IMPERIUM, UNALIGNED and KNIGHT OF THE COG units), this unit gains a bonus depending on which Canticle of the Omnissiah is active for your army.

At the start of the battle round, you can select one Canticle that has not yet been active for your army. If you do so, until the end of the battle round, that Canticle is active for your army.

SHROUDPSALM

Robot, servitor and priest shift their binharic emissions into visible spectra, the static pouring from their vox-grilles manifesting as an electromagnetic storm that hides them from the foe.

While this Canticle is active, this unit counts as receiving the benefits of Light Cover.

CHANT OF THE REMORSELESS FIST

In spitting out a staccato chant to the Motive Force, the faithful warriors of the Cult Mechanicus are filled with merciless surety as well as intent.

While this Canticle is active, each time a model in this unit make a melee attack, add 1 to the Strength characteristic of that attack.

INCANTATION OF THE IRON SOUL

Raising their voices in binharic praise, the Disciples of the Machine God bolster their spirits with the surety of iron.

While this Canticle is active:

  • Each time a Combat Attrition test is taken for this unit, ignore any or all modifiers.
  • Each time a model in this unit would lose a wound as a result of a mortal wound, roll one D6: on a 5+, that wound is not lost. If this unit has the Refusal to Yield dogma, that wound is not lost on a 4+ instead.

BENEDICTION OF THE OMNISSIAH

Those blessed enough to comprehend this blaring vox-prayer find their targeting reticules guided by the Omnissiah’s own vigilance.

While this Canticle is active, each time this unit is selected to shoot, when resolving its attacks you can:

  • Re-roll one hit roll.
  • Re-roll one wound roll.
  • Re-roll one damage roll.

INVOCATION OF MACHINE VENGEANCE

The Tech-Priests lead adherents of the Machine Cult in a binharic prayer of hatred against the unenlightened. A manifestation of power surges through tendons, wires and pistons as the righteous eagerly close on the blasphemers.

While this Canticle is active, each time an Advance roll or a charge roll is made for this unit, roll one additional D6 and discard the lowest result.

LITANY OF THE ELECTROMANCER

Summoning the spark of the Machine God’s divinity that burns within them, the Omnissiah’s faithful manifest auras of energy that disrupt the unbeliever’s neuro-cortices and cause the foe to spasm.

While this Canticle is active, each time a melee attack is made against this unit, subtract 1 from that attack’s hit roll.

Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.

The ELECTRO-PRIESTS keyword is used in following Adeptus Mechanicus datasheets:

The ELECTRO-PRIESTS keyword is used in following Adeptus Mechanicus datasheets:

The ELECTRO-PRIESTS keyword is used in following Adeptus Mechanicus datasheets:

Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.

The CULT MECHANICUS and CORE keywords are used in following Adeptus Mechanicus datasheets:

The CULT MECHANICUS and CHARACTER keywords are used in following Adeptus Mechanicus datasheets:

Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
© Vyacheslav Maltsev 2013-2021