Adeptus Mechanicus – Cybernetica Datasmith
This datasheet does not meet the selection criteria (see Settings tab).
3

Cybernetica Datasmith

NoNAME  M WS BS S T W A Ld Sv
45
Cybernetica Datasmith
1
45
Cybernetica Datasmith
6" 3+ 3+ 4 4 4 2 8 2+
A Cybernetica Datasmith is a single model armed with a power fist and gamma pistol.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Gamma pistol
Gamma pistol
12"
Pistol 1
6
-3
2
You can re-roll failed wound rolls for this weapon when attacking a VEHICLE.
You can re-roll failed wound rolls for this weapon when attacking a VEHICLE.
Power fist
Power fist
Melee
Melee
x2
-3
2
Each time an attack is made with this weapon, subtract 1 from that attack’s hit roll.
Each time an attack is made with this weapon, subtract 1 from that attack’s hit roll.
ABILITIES
ABILITIES
Canticles of the Omnissiah
Refractor Field: This model has a 5+ invulnerable save.
Master of Machines: At the end of your Movement phase this model can repair a single friendly Kastelan Robot within 3". That model regains D3 lost wounds. A model may not be the target of the Master of Machines ability more than once per turn.
FACTION KEYWORDS: IMPERIUM, ADEPTUS MECHANICUS, CULT MECHANICUS, <FORGE WORLD>
KEYWORDS: CHARACTER, INFANTRY, TECH-PRIEST, CYBERNETICA DATASMITH

Datasheet-related Stratagems

1CP

MECHANICUS LOCUM

Adeptus Mechanicus Stratagem

Every congregation of Tech-Priests comprises masters of arcane knowledge, zealous leaders of man and machine.

Use this Stratagem before the battle, after nominating your Warlord. Select one <FORGE WORLD> CHARACTER model from your army that does not have a Warlord Trait and determine one Warlord Trait for it; it is regarded as your Warlord for the purposes of that Warlord Trait. Each Warlord Trait in your army must be unique (if randomly generated, re-roll duplicate results).
1CP/3CP

ARCHEOTECH SPECIALISTS

Adeptus Mechanicus Stratagem

Within the techno-vaults there lie many mechanised wonders that can be requisitioned during times of war.

Use this Stratagem before the battle. Your army can have one extra relic from the Arcana Mechanicum for 1 CP, or two extra relics for 3 CPs. All of the relics that you include must be different and be given to different ADEPTUS MECHANICUS CHARACTERS. You can only use this Stratagem once.
1CP

DATASPIKE

Adeptus Mechanicus Stratagem

An intense micro-burst of highly concentrated doctrinal sacrament can overload any nearby machine spirit with explosive results.

Use this Stratagem immediately after fighting with an ADEPTUS MECHANICUS CHARACTER. Resolve one additional attack against an enemy VEHICLE within 1" of the character. If the attack hits, the enemy vehicle suffers D3 mortal wounds.
1CP

TECH-ADEPT

Adeptus Mechanicus Stratagem

There is no task more holy than repairing war engines damaged in the crusade to fulfil the Machine God’s will.

Use this Stratagem after an ADEPTUS MECHANICUS CHARACTER from your army has used an ability to repair a friendly model (e.g. Master of Machines). The character can immediately attempt to use that ability again, and can even use it to repair the same model.
2CP

ACQUISITION AT ANY COST

Adeptus Mechanicus Stratagem

In the eternal quest for knowledge and the acquisition of technology, Tech-Priests require super-human efforts from the troops under their command.

Use this Stratagem at the end of any of your turns. Select an ADEPTUS MECHANICUS INFANTRY unit from your army that is within 3" of an objective marker. Until the start of your next turn you can add 1 to all saving throws made for that unit and increase the Attacks characteristic of all models in that unit by 1. This Stratagem can only be used once per turn.
2CP

INFOSLAVE SKULL

Adeptus Mechanicus Stratagem

Mono-task infoslave skulls make ideal lookouts to watch against the sudden deployment of enemy troops.

Use this Stratagem immediately after your opponent sets up a unit that is arriving on the battlefield as reinforcements within 12" of one of your ADEPTUS MECHANICUS INFANTRY units. Your unit can immediately shoot at that enemy unit as if it were the Shooting phase, but you must subtract 1 from all the resulting hit rolls.
1CP

STEEL MIND, IRON LOGIC

Graia Stratagem

Even the vile energy surges of the warp will be quieted by the faith and undeniable logic that emanates from the pure devotees of Graia.

Use this Stratagem when an enemy PSYKER manifests a psychic power within 24" of one or more of your GRAIA INFANTRY units. Roll a D6; on a 4+, that psychic power is resisted and its effects are negated.
1CP

KNIGHT OF THE COG

Adeptus Mechanicus Stratagem

Those Knights that are favoured by the Cog-Blessing of the Omnissiah revel in the divine energies of the Machine God.

Use this Stratagem at the start of any battle round, before determining which Canticle of the Omnissiah will be in effect. Select a QUESTOR MECHANICUS unit from your army that is within 12" of a friendly ADEPTUS MECHANICUS CHARACTER. That unit gains the Canticles of the Omnissiah ability until the start of the next battle round.
1CP

CYBERNETICA COHORT

Specialist Detachment Stratagem

Marching into battle with inhuman synchronisation come the maniples of the Legio Cybernetica, ready to wage war in their pursuit of arcane knowledge.

Use this Stratagem when choosing your army. Pick an ADEPTUS MECHANICUS Detachment from your army to be a Cybernetica Cohort Specialist Detachment. TECH-PRIESTS DOMINUS, ENGINSEERS, CYBERNETICA DATASMITHS and KASTELAN ROBOTS in that Detachment gain the CYBERNETICA COHORT keyword.
1CP

POWER SURGE

Adeptus Mechanicus Stratagem

The datasmith delivers a burst of energy to the Kastelan Robots allowing them to cross the battlefield at an accelerated pace.

Use this Stratagem at the start of your Charge phase. Pick a unit of CYBERNETICA COHORT KASTELAN ROBOTS from your army within 3" of a friendly CYBERNETICA COHORT CYBERNETICA DATASMITH . Add 3 to charge rolls made for that unit of Kastelan Robots until the end of that phase.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Morale Tests
To take a Morale test, roll one D6 and add the number of models from the unit that have been destroyed this turn. If the result is equal to or less than the highest Leadership (Ld) characteristic in the unit, the Morale test is passed and nothing else happens. An unmodified roll of 1 also always results in a passed Morale test, irrespective of the total result. In any other case, the Morale test is failed, one model flees that unit, and you must then take Combat Attrition tests for the remaining models in the unit. You decide which model from your unit flees – that model is removed from play and counts as having been destroyed, but it never triggers any rules that are used when a model is destroyed.

  • Morale test = D6 + number of models destroyed this turn.
  • Unmodified roll of 1 always a success (no models flee).
  • If Morale test exceeds unit’s Ld, one model flees and other models must take Combat Attrition tests.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Terrain and Cover
Some pieces of terrain can provide certain bonuses to units in your army. Each bonus and how to acquire it is described in the Terrain Features section of the Core Rules. If a model has acquired such a bonus (to it's Save, Leadership or other characteristics), it is considered as receiving the benefit of cover. There are ways for some models to ignore such bonuses while making an attack, but it should be known what kind of benefit is ignored (see the Rare Rules for clarification).
Canticles of the Omnissiah

The disciples of the Omnissiah incant complex war-blessings, as much optimisation subroutines as they are expressions of faith in the Machine God.

All units with this ability gain a bonus during the battle depending on the Canticle of the Omnissiah currently being canted.

At the start of each battle round, pick which Canticle of the Omnissiah from the table below is in effect for the duration of the battle round. The same Canticle may not be picked twice during the same battle.

Alternatively, you can randomly determine which Canticle of the Omnissiah is in effect by rolling a D6 and consulting the table below. Note that if you randomly determine a Canticle, it takes effect even if the same Canticle has been in effect earlier in the battle.

If you have a Battle-forged army, units only receive the bonus if every model in their Detachment has this ability.
D6CANTICLE
1

Incantation of the Iron Soul

Raising their voices in binharic praise, the Disciples of the Machine God bolster their spirits with the surety of iron.

You can re-roll failed Morale tests for affected units.

2

Litany of the Electromancer

Summoning the spark of the Machine God’s divinity that burns within them, the Omnissiah’s faithful manifest blazing auras of energy that lay low the unbeliever.

Roll a D6 for each enemy unit that is within 1" of any affected units; on a roll of 6, the unit being rolled for suffers D3 mortal wounds.

3

Chant of the Remorseless Fist

In spitting out a staccato chant to the Motive Force, the faithful warriors of the Cult Mechanicus are filled with merciless surety as well as intent.

You can re-roll any hit rolls of 1 for affected units in the Fight phase.

4

Shroudpsalm

Robot, servitor and priest shift their binharic emissions into visible spectra, the static pouring from their vox-grilles manifesting as an electromagnetic storm that hides them from the foe.

Affected units gain the bonus to their armour saving throws as if they were in cover. Units already in cover are unaffected.

5

Invocation of Machine Might

The Tech-Priests lead their flock in a hexadecimic prayer that sends miraculous strength surging through tendons, wires and pistons.

Affected units have +1 Strength.

6

Benediction of the Omnissiah

Those blessed enough to comprehend this blaring vox-prayer find their targeting reticules guided by the Omnissiah’s own vigilance.

You can re-roll failed hit rolls of 1 for affected units in the Shooting phase.

Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.

The TECH-PRIEST keyword is used in following Adeptus Mechanicus datasheets:

The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.

The ADEPTUS MECHANICUS and CHARACTER keywords are used in following Adeptus Mechanicus datasheets:

Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Manifesting Psychic Powers
The same PSYKER unit cannot attempt to manifest Smite more than once during the same battle round. When you select a PSYKER unit to manifest psychic powers, you select one psychic power that unit knows and attempt to manifest it. With the exception of Smite, you cannot attempt to manifest the same psychic power more than once in the same battle round, even with different PSYKER units.

To manifest the psychic power, you must first pass a Psychic test. The opposing player can then select one of their PSYKER units that is within 24" of the PSYKER unit attempting to manifest the power and attempt to deny that power before its effects are resolved by passing a Deny the Witch test.

So long as the Psychic test was successful and the psychic power was not denied by a successful Deny the Witch test, the psychic power is successfully manifested and its effects, which will be described in the power itself, are then resolved. If the PSYKER unit can attempt to manifest more than one psychic power in its Psychic phase, you can then attempt to manifest those, one at a time, as described above. The number of psychic powers each PSYKER unit can attempt to manifest in its Psychic phase is listed on its datasheet.

  • Select psychic power.
  • You cannot select the same psychic power more than once per battle round, unless that power is Smite.
  • Attempt to manifest the psychic power by taking a Psychic test.
  • The opponent can attempt to deny the psychic power by taking a Deny the Witch test.
  • If successfully manifested, resolve the psychic power’s effects.
  • Select another psychic power.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Terrain and Cover
Some pieces of terrain can provide certain bonuses to units in your army. Each bonus and how to acquire it is described in the Terrain Features section of the Core Rules. If a model has acquired such a bonus (to it's Save, Leadership or other characteristics), it is considered as receiving the benefit of cover. There are ways for some models to ignore such bonuses while making an attack, but it should be known what kind of benefit is ignored (see the Rare Rules for clarification).
Canticles of the Omnissiah

The disciples of the Omnissiah incant complex war-blessings, as much optimisation subroutines as they are expressions of faith in the Machine God.

All units with this ability gain a bonus during the battle depending on the Canticle of the Omnissiah currently being canted.

At the start of each battle round, pick which Canticle of the Omnissiah from the table below is in effect for the duration of the battle round. The same Canticle may not be picked twice during the same battle.

Alternatively, you can randomly determine which Canticle of the Omnissiah is in effect by rolling a D6 and consulting the table below. Note that if you randomly determine a Canticle, it takes effect even if the same Canticle has been in effect earlier in the battle.

If you have a Battle-forged army, units only receive the bonus if every model in their Detachment has this ability.
D6CANTICLE
1

Incantation of the Iron Soul

Raising their voices in binharic praise, the Disciples of the Machine God bolster their spirits with the surety of iron.

You can re-roll failed Morale tests for affected units.

2

Litany of the Electromancer

Summoning the spark of the Machine God’s divinity that burns within them, the Omnissiah’s faithful manifest blazing auras of energy that lay low the unbeliever.

Roll a D6 for each enemy unit that is within 1" of any affected units; on a roll of 6, the unit being rolled for suffers D3 mortal wounds.

3

Chant of the Remorseless Fist

In spitting out a staccato chant to the Motive Force, the faithful warriors of the Cult Mechanicus are filled with merciless surety as well as intent.

You can re-roll any hit rolls of 1 for affected units in the Fight phase.

4

Shroudpsalm

Robot, servitor and priest shift their binharic emissions into visible spectra, the static pouring from their vox-grilles manifesting as an electromagnetic storm that hides them from the foe.

Affected units gain the bonus to their armour saving throws as if they were in cover. Units already in cover are unaffected.

5

Invocation of Machine Might

The Tech-Priests lead their flock in a hexadecimic prayer that sends miraculous strength surging through tendons, wires and pistons.

Affected units have +1 Strength.

6

Benediction of the Omnissiah

Those blessed enough to comprehend this blaring vox-prayer find their targeting reticules guided by the Omnissiah’s own vigilance.

You can re-roll failed hit rolls of 1 for affected units in the Shooting phase.

The QUESTOR MECHANICUS keyword is used in following Adeptus Mechanicus datasheets:

The TECH-PRIEST and DOMINUS keywords are used in following Adeptus Mechanicus datasheets:

The ENGINSEER keyword is used in following Adeptus Mechanicus datasheets:

The CYBERNETICA DATASMITH keyword is used in following Adeptus Mechanicus datasheets:

The KASTELAN ROBOTS keyword is used in following Adeptus Mechanicus datasheets:

Heavy Support

The KASTELAN ROBOTS keyword is used in following Adeptus Mechanicus datasheets:

Heavy Support

The CYBERNETICA DATASMITH keyword is used in following Adeptus Mechanicus datasheets:

Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
© Vyacheslav Maltsev 2013-2021