Adepta Sororitas – Zephyrim Squad
This datasheet does not meet the selection criteria (see Settings tab).
5

Zephyrim Squad

NoNAME  M WS BS S T W A Ld Sv
18
Zephyrim
4‑9
18
Zephyrim
12" 3+ 3+ 3 3 1 2 8 3+
18
Zephyrim Superior
1
18
Zephyrim Superior
12" 3+ 3+ 3 3 1 3 9 3+
This unit contains 1 Zephyrim Superior and 4 Zephyrim. It can additionally contain up to 5 Zephyrim (Power Rating +5). Every model is equipped with: bolt pistol; power sword; frag grenades; krak grenades.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Bolt pistol
Bolt pistol
12"
Pistol 1
4
0
1
-
+5
Plasma pistol
Before selecting targets, select one of the profiles below to make attacks with.
+5
Plasma pistol
Before selecting targets, select one of the profiles below to make attacks with.
 - Standard
 - Standard
12"
Pistol 1
7
-3
1
-
 - Supercharge
 - Supercharge
12"
Pistol 1
8
-3
2
If any unmodified hit rolls of 1 are made for attacks with this weapon profile, the bearer is destroyed after shooting with this weapon.
If any unmodified hit rolls of 1 are made for attacks with this weapon profile, the bearer is destroyed after shooting with this weapon.
Power sword
Power sword
Melee
Melee
+1
-3
1
-
Frag grenades
Frag grenades
6"
Grenade D6
3
0
1
Blast
Blast
Krak grenades
Krak grenades
6"
Grenade 1
6
-1
D3
-
OTHER WARGEAR
ABILITIES 
+5
Zephyrim Pennant
You can re-roll charge rolls made for <ORDER> units whilst they are within 6" of any friendly units with a Zephyrim pennant when the roll is made.
+5
Zephyrim Pennant
You can re-roll charge rolls made for <ORDER> units whilst they are within 6" of any friendly units with a Zephyrim pennant when the roll is made.
WARGEAR OPTIONS
WARGEAR OPTIONS
 • The Zephyrim Superior can be equipped with 1 plasma pistol instead of 1 bolt pistol.
 • If the Zephyrim Superior is equipped with 1 bolt pistol, she can have a Zephyrim pennant.
ABILITIES
ABILITIES
Acts of Faith, Sacred Rites, Shield of Faith
Rapturous Blows: When resolving an attack made with a melee weapon by a model in this unit, you can re-roll the wound roll.
Sky Strike: During deployment, you can set up this unit in the sky instead of setting it up on the battlefield. If you do, at the end of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" away from any enemy models.
Angelic Visage: The invulnerable save models in this unit receive from the Shield of Faith ability is improved by 1, to a maximum of 4+.
FACTION KEYWORDS: IMPERIUM, ADEPTUS MINISTORUM, ADEPTA SORORITAS, <ORDER>
KEYWORDS: INFANTRY, JUMP PACK, FLY, ZEPHYRIM SQUAD

Datasheet-related Stratagems

1CP

EMBODIED PROPHECY

Adepta Sororitas Stratagem

The Zephyrim are said to embody the God-Emperor’s promise. Where they lead, victory must surely follow.

Use this Stratagem at the start of the Fight phase. Select one ZEPHYRIM SQUAD unit from your army. Until the end of that phase, when resolving an attack made with a melee weapon by a model in a friendly ADEPTA SORORITAS unit within 6" of that Zephyrim unit, re-roll a wound roll of 1.
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Acts of Faith

Through the prayers of the faithful is the Emperor’s will made manifest.

If your army contains at least one unit with this ability, you can perform one Act of Faith in each phase. To do so, you will use Miracle dice.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Deny the Witch
When a PSYKER unit attempts to deny a psychic power, you must take a Deny the Witch test for that unit by rolling 2D6. If the total is greater than the result of the Psychic test, the Deny the Witch test is passed and the psychic power is denied. Only one attempt can be made to deny a psychic power. If a PSYKER unit can attempt to deny more than one psychic power in a psychic phase, this will be listed on its datasheet.

  • Deny the Witch: Passed if 2D6 exceeds result of the opposing PSYKER’s Psychic test.
  • Only one attempt can be made to deny each psychic power.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Morale Tests
To take a Morale test, roll one D6 and add the number of models from the unit that have been destroyed this turn. If the result is equal to or less than the highest Leadership (Ld) characteristic in the unit, the Morale test is passed and nothing else happens. An unmodified roll of 1 also always results in a passed Morale test, irrespective of the total result. In any other case, the Morale test is failed, one model flees that unit, and you must then take Combat Attrition tests for the remaining models in the unit. You decide which model from your unit flees – that model is removed from play and counts as having been destroyed, but it never triggers any rules that are used when a model is destroyed.

  • Morale test = D6 + number of models destroyed this turn.
  • Unmodified roll of 1 always a success (no models flee).
  • If Morale test exceeds unit’s Ld, one model flees and other models must take Combat Attrition tests.
Sacred Rites

The Adepta Sororitas pray for the Emperor to guide them and fill them with strength.

If every unit in your army has the ADEPTA SORORITAS and/or ADEPTUS MINISTORUM Faction keywords, this unit gains an ability depending on which Sacred Rite is active for your army. Determine which Sacred Rite is active for all units from your army with this ability at the start of the battle. To do so, after deployment, but before the first battle round begins, select one Sacred Rite from the following table to be active. Alternatively, you can roll two D6 to randomly generate two Sacred Rites to be active (a duplicate result has no additional effect, but is considered to be active for the purposes of the Battle Rites Stratagem). In either case, Sacred Rites are active until the end of the battle.
D6Sacred Rite
1Hand of the Emperor:

The Sororitas are imbued with a boundless font of vigour.

When a unit with this Sacred Rite Advances, add 1 to the Advance roll. When you make a charge roll for a unit with this Sacred Rite, add 1 to the result. 
2Spirit of the Martyr:

Even with their dying act the Sororitas mete out the Emperor’s judgement.

When a model with this Sacred Rite is destroyed, roll one D6 before removing the model from play. On a 5+ that model can either shoot with one of its ranged weapons as if it were your Shooting phase, or make one attack with one of its melee weapons as if it were the Fight phase (if the model has a damage table, use the bottom row of that table when shooting with that ranged weapon or resolving that attack with a melee weapon). 
3Aegis of the Emperor:

The Sororitas do not suffer the vile trickery of witches.

When a Deny the Witch test is taken for a unit with this Sacred Rite, add 3 to the total. 
4Divine Guidance:

Seeing the weak points in their enemies’ armour, the Sisters of Battle strike out to shatter it with contemptuous ease.

When resolving an attack made with a ranged weapon by a model with this Sacred Rite, on an unmodified wound roll of 6 the Armour Penetration characteristic of that weapon is improved by 1 for that attack (e.g. AP 0 becomes AP -1). 
5The Passion:

The Sororitas are filled with a burning passion to inflict suffering upon the faithless.

When resolving an attack made with a melee weapon by a model with this Sacred Rite, an unmodified hit roll of 6 scores 1 additional hit. 
6Light of the Emperor:

The Emperor’s radiance shines upon his warriors, emboldening them amidst the thick of battle.

When a Morale test is taken for a unit with this Sacred Rite, you can re-roll the dice. 
Shield of Faith

Conviction is the greatest armour.

Models in this unit have a 6+ invulnerable save.

In addition, one model in this unit can attempt to resist one psychic power in your opponent’s Psychic phase in the same manner as a PSYKER by taking a Deny the Witch test, if that model is within 24" of the enemy model manifesting that psychic power. When taking that Deny the Witch test, roll one D6 instead of 2D6; the psychic power is resisted if the roll is greater than the result of the Psychic test that manifested the power.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.

The JUMP PACK keyword is used in following Adepta Sororitas datasheets:

Fast Attack

The FLY keyword is used in following Adepta Sororitas datasheets:

Fast Attack

The ZEPHYRIM SQUAD keyword is used in following Adepta Sororitas datasheets:

© Vyacheslav Maltsev 2013-2021