Adepta Sororitas – Uriah Jacobus
This datasheet does not meet the selection criteria (see Settings tab).
3

Uriah Jacobus

NoNAME  M WS BS S T W A Ld Sv
50
Uriah Jacobus
1
50
Uriah Jacobus
6" 3+ 3+ 3 3 5 4 8 6+
Uriah Jacobus is a single model equipped with: bolt pistol; Redeemer; chainsword; frag grenades; krak grenades. Only one URIAH JACOBUS model can be included in your army.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Bolt pistol
Bolt pistol
12"
Pistol 1
4
0
1
-
The Redeemer
The Redeemer
24"
Assault 2
4
-1
1
When resolving an attack made with this weapon, on a wound roll of 6+, this weapon has a Damage characteristic of 2 for that attack.
When resolving an attack made with this weapon, on a wound roll of 6+, this weapon has a Damage characteristic of 2 for that attack.
Chainsword
Chainsword
Melee
Melee
User
0
1
Each time the bearer fights, it makes 1 additional attack with this weapon.
Each time the bearer fights, it makes 1 additional attack with this weapon.
Frag grenades
Frag grenades
6"
Grenade D6
3
0
1
Blast
Blast
Krak grenades
Krak grenades
6"
Grenade 1
6
-1
D3
-
ABILITIES
ABILITIES
Zealot
Banner of Sanctity: Add 1 to the Leadership characteristic of friendly ADEPTUS MINISTORUM and ASTRA MILITARUM units whilst they are within 6" of this model.
Rosarius: This model has a 4+ invulnerable save.
War Hymns: Add 1 to the Attacks characteristic of models in ADEPTUS MINISTORUM INFANTRY and ASTRA MILITARUM INFANTRY units whilst their unit is within 6" of any friendly models with this ability.
Word of the Emperor: Roll one D6 when an ADEPTUS MINISTORUM model flees whilst its unit is within 6" of any friendly models with this ability. On a 4+ that model does not flee.
FACTION KEYWORDS: IMPERIUM, ADEPTUS MINISTORUM
KEYWORDS: CHARACTER, INFANTRY, MINISTORUM PRIEST, URIAH JACOBUS

Datasheet-related Stratagems

SUFFER NOT THE WITCH1CP
Adepta Sororitas – Battle Tactic Stratagem

Those who would wield sorcery against the righteous often find themselves facing the full fury of the Ecclesiarchy.

Use this Stratagem in your Shooting phase, when an ADEPTUS MINISTORUM unit from your army is selected to shoot, or in the Fight phase, when an ADEPTUS MINISTORUM unit from your army is selected to fight. Until the end of the phase, each time a model in that unit makes an attack against a PSYKER unit, add 1 to that attack’s hit roll (if the attack is made by an ADEPTUS MINISTORUM CHARACTER model, add 1 to that attack’s hit roll and add 1 to that attack’s wound roll).
OPEN THE RELIQUARIES1CP
Adepta Sororitas – Requisition Stratagem

In the direst circumstances, even the most sacred of the Ministorum’s holy artefacts are brought forth to aid the faithful.

Use this Stratagem before the battle, when you are mustering your army, if your WARLORD has the ADEPTUS MINISTORUM keyword. Select one ADEPTUS MINISTORUM CHARACTER model from your army and give them one Relic of the Ecclesiarchy (this must be a Relic they could have). Each Relic in your army must be unique, and you cannot use this Stratagem to give a model two Relics. You can only use this Stratagem once, unless you are playing a Strike Force battle (in which case, you can use this Stratagem twice) or an Onslaught battle (in which case, you can use this Stratagem three times).
SAINT IN THE MAKING1CP
Adepta Sororitas – Requisition Stratagem

This warrior stands pre-eminent in the Adeptus Ministorum as a shining example of everything a devout servant of the Emperor aspires to.

Use this Stratagem before the battle, when you are mustering your army, if your WARLORD has the ADEPTUS MINISTORUM keyword. Select one ADEPTUS MINISTORUM CHARACTER model from your army (excluding named characters) and determine one Warlord Trait for it (this must be a Warlord Trait it can have); that model is only regarded as your WARLORD for the purposes of that Warlord Trait. Each Warlord Trait in your army must be unique (if randomly generated, re-roll duplicate results), and you cannot use this Stratagem to give a model two Warlord Traits. You can only use this Stratagem once, unless you are playing a Strike Force battle (in which case, you can use this Stratagem twice) or an Onslaught battle (in which case, you can use this Stratagem three times).

The URIAH JACOBUS keyword is used in following Adepta Sororitas datasheets:

PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.
ASSAULT
Assault weapons fire so rapidly or indiscriminately that they can be shot from the hip as warriors dash forwards into combat.
If a unit includes any models equipped with Assault weapons, that unit is still eligible to shoot with in your Shooting phase even if it has Advanced this turn, but you can only resolve attacks using those Assault weapons when you select that unit to shoot with. If a model shoots an Assault weapon in the same turn in which its unit has Advanced, subtract 1 from hit rolls when resolving that weapon’s attacks.

  • Can be shot even if firing model’s unit Advanced.
  • Subtract 1 from hit rolls if the firing model’s unit Advanced.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
Zealot

With righteous fervour, the Emperor’s faithful deliver his furious judgement.

Each time a model in this unit makes a melee attack, if this unit made a charge move, was charged or performed a Heroic Intervention this turn, you can re-roll that attack’s hit roll.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Morale Tests
To take a Morale test, roll one D6 and add the number of models from the unit that have been destroyed this turn. If the result is equal to or less than the highest Leadership (Ld) characteristic in the unit, the Morale test is passed and nothing else happens. An unmodified roll of 1 also always results in a passed Morale test, irrespective of the total result. In any other case, the Morale test is failed, one model flees that unit, and you must then take Combat Attrition tests for the remaining models in the unit. You decide which model from your unit flees – that model is removed from play and counts as having been destroyed, but it never triggers any rules that are used when a model is destroyed.

  • Morale test = D6 + number of models destroyed this turn.
  • Unmodified roll of 1 always a success (no models flee).
  • If Morale test exceeds unit’s Ld, one model flees and other models must take Combat Attrition tests.

The MINISTORUM PRIEST keyword is used in following Adepta Sororitas datasheets:

Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
© Vyacheslav Maltsev 2013-2021