Adepta Sororitas – Triumph of Saint Katherine
This datasheet does not meet the selection criteria (see Settings tab).
10

Triumph of Saint Katherine

NoNAME  M WS BS S T W! A Ld Sv Relics
195
Triumph of Saint Katherine
1
195
Triumph of Saint Katherine
6" 3+ 3+ 3 3 10-18 14 9 3+ 5
6" 3+ 3+ 3 3 5-9 8 9 3+ 2
6" 3+ 3+ 3 3 1-4 6 9 3+ 1
The Triumph of Saint Katherine is a single model equipped with: 6 bolt pistols; the Martyr’s Sword; relic weapons; frag grenades; krak grenades. You can only include one of this model in your army.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Bolt pistol
Bolt pistol
12"
Pistol 1
4
0
1
-
The Martyr’s Sword
The Martyr’s Sword
Melee
Melee
+3
-3
2
When the bearer fights, no more than 4 attacks can be made with this weapon.
When the bearer fights, no more than 4 attacks can be made with this weapon.
Relic weapons
Relic weapons
Melee
Melee
+2
-1
1
-
Frag grenades
Frag grenades
6"
Grenade D6
3
0
1
Blast
Blast
Krak grenades
Krak grenades
6"
Grenade 1
6
-1
D3
-
ABILITIES
ABILITIES
Acts of Faith, Sacred Rites, Shield of Faith
Praesidium Protectiva: This model has a 4+ invulnerable save. When resolving an attack made against this model, subtract 1 from the hit roll.
The Fiery Heart: Morale tests taken for friendly ADEPTA SORORITAS units within 6" of this model are automatically passed.
Solemn Procession: This model cannot embark aboard a TRANSPORT. In addition, for the purposes of any terrain traits (e.g. Dense Cover, Obscuring), this model is considered to have a Wounds characteristic of 9, not 18.
Relics of the Matriarchs: This model has a number of relics as detailed in the damage table above. Each relic grants this model an ability as follows. This model can only have one of each relic. When this model suffers damage that reduces its number of relics, select which of the relics (and their abilities) this model no longer has. If this model regains lost wounds that increases its number of relics, select which of the relics (and their abilities) this model regains.

Censer of the Sacred Rose: At the start of each turn, gain one Miracle dice.

Simulacrum of the Ebon Chalice: At the start of your Shooting phase, roll one D6 for each enemy unit within 6" of this model, adding 1 to the result if the unit being rolled for is a PSYKER and 1 to the result if the unit being rolled for is a CHAOS unit. On a 5+ the unit being rolled for suffers D3 mortal wounds.

Petals of the Bloody Rose: Add 1 to hit rolls for attacks made with melee weapons by models in friendly ADEPTA SORORITAS units whilst their unit is within 6" of this model.

Icon of the Valorous Heart: Once per phase, you can perform one Act of Faith for a friendly unit within 6" that has the Acts of Faith ability, even if you have already performed one or more Acts of Faith in that phase.

Simulacrum of the Argent Shroud: When you perform an Act of Faith for a friendly unit whilst it is within 6" of this model, you can increase or decrease the value of one Miracle dice used by 1 before you use it, to a maximum of 6 and a minimum of 1. This is not cumulative with any other abilities that can increase or decrease the value of a Miracle dice (e.g. the Dialogus’ Stirring Rhetoric ability).
WARLORD TRAIT!
WARLORD TRAIT!
Pure of Will: This Warlord can attempt to deny one additional psychic power in your opponent’s Psychic phase, as described in the Shield of Faith ability. Subtract 1 from Psychic tests taken for enemy models whilst they are within 12" of this Warlord.
FACTION KEYWORDS: IMPERIUM, ADEPTUS MINISTORUM, ADEPTA SORORITAS
KEYWORDS: CHARACTER, INFANTRY, TRIUMPH OF SAINT KATHERINE

Datasheet-related Stratagems

1CP

MARTYRED

Adepta Sororitas Stratagem

The Sisters of Battle do not give in to despair when their leaders are slain. Instead, the blood of these martyred heroes only strengthens their resolve.

Use this Stratagem at the end of any phase in which your WARLORD was destroyed, if your WARLORD is an ADEPTA SORORITAS CHARACTER model. If your Warlord is Celestine, perform any rolls for the model’s Miraculous Intervention ability before using this Stratagem. This Stratagem may not be used if your WARLORD is returned to the battlefield using the Miraculous Intervention ability or the Divine Intervention Stratagem. You gain D3 Command Points.
1CP

VESSEL OF THE EMPEROR’S WILL

Adepta Sororitas Stratagem

The Emperor’s grace extends from his chosen leaders to those who follow them into battle.

Use this Stratagem after you perform an Act of Faith for an ADEPTA SORORITAS CHARACTER unit from your army. Gain one Miracle dice.
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
Acts of Faith

Through the prayers of the faithful is the Emperor’s will made manifest.

If your army contains at least one unit with this ability, you can perform one Act of Faith in each phase. To do so, you will use Miracle dice.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Deny the Witch
When a PSYKER unit attempts to deny a psychic power, you must take a Deny the Witch test for that unit by rolling 2D6. If the total is greater than the result of the Psychic test, the Deny the Witch test is passed and the psychic power is denied. Only one attempt can be made to deny a psychic power. If a PSYKER unit can attempt to deny more than one psychic power in a psychic phase, this will be listed on its datasheet.

  • Deny the Witch: Passed if 2D6 exceeds result of the opposing PSYKER’s Psychic test.
  • Only one attempt can be made to deny each psychic power.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Morale Tests
To take a Morale test, roll one D6 and add the number of models from the unit that have been destroyed this turn. If the result is equal to or less than the highest Leadership (Ld) characteristic in the unit, the Morale test is passed and nothing else happens. An unmodified roll of 1 also always results in a passed Morale test, irrespective of the total result. In any other case, the Morale test is failed, one model flees that unit, and you must then take Combat Attrition tests for the remaining models in the unit. You decide which model from your unit flees – that model is removed from play and counts as having been destroyed, but it never triggers any rules that are used when a model is destroyed.

  • Morale test = D6 + number of models destroyed this turn.
  • Unmodified roll of 1 always a success (no models flee).
  • If Morale test exceeds unit’s Ld, one model flees and other models must take Combat Attrition tests.
Sacred Rites

The Adepta Sororitas pray for the Emperor to guide them and fill them with strength.

If every unit in your army has the ADEPTA SORORITAS and/or ADEPTUS MINISTORUM Faction keywords, this unit gains an ability depending on which Sacred Rite is active for your army. Determine which Sacred Rite is active for all units from your army with this ability at the start of the battle. To do so, after deployment, but before the first battle round begins, select one Sacred Rite from the following table to be active. Alternatively, you can roll two D6 to randomly generate two Sacred Rites to be active (a duplicate result has no additional effect, but is considered to be active for the purposes of the Battle Rites Stratagem). In either case, Sacred Rites are active until the end of the battle.
D6Sacred Rite
1Hand of the Emperor:

The Sororitas are imbued with a boundless font of vigour.

When a unit with this Sacred Rite Advances, add 1 to the Advance roll. When you make a charge roll for a unit with this Sacred Rite, add 1 to the result. 
2Spirit of the Martyr:

Even with their dying act the Sororitas mete out the Emperor’s judgement.

When a model with this Sacred Rite is destroyed, roll one D6 before removing the model from play. On a 5+ that model can either shoot with one of its ranged weapons as if it were your Shooting phase, or make one attack with one of its melee weapons as if it were the Fight phase (if the model has a damage table, use the bottom row of that table when shooting with that ranged weapon or resolving that attack with a melee weapon). 
3Aegis of the Emperor:

The Sororitas do not suffer the vile trickery of witches.

When a Deny the Witch test is taken for a unit with this Sacred Rite, add 3 to the total. 
4Divine Guidance:

Seeing the weak points in their enemies’ armour, the Sisters of Battle strike out to shatter it with contemptuous ease.

When resolving an attack made with a ranged weapon by a model with this Sacred Rite, on an unmodified wound roll of 6 the Armour Penetration characteristic of that weapon is improved by 1 for that attack (e.g. AP 0 becomes AP -1). 
5The Passion:

The Sororitas are filled with a burning passion to inflict suffering upon the faithless.

When resolving an attack made with a melee weapon by a model with this Sacred Rite, an unmodified hit roll of 6 scores 1 additional hit. 
6Light of the Emperor:

The Emperor’s radiance shines upon his warriors, emboldening them amidst the thick of battle.

When a Morale test is taken for a unit with this Sacred Rite, you can re-roll the dice. 
Shield of Faith

Conviction is the greatest armour.

Models in this unit have a 6+ invulnerable save.

In addition, one model in this unit can attempt to resist one psychic power in your opponent’s Psychic phase in the same manner as a PSYKER by taking a Deny the Witch test, if that model is within 24" of the enemy model manifesting that psychic power. When taking that Deny the Witch test, roll one D6 instead of 2D6; the psychic power is resisted if the roll is greater than the result of the Psychic test that manifested the power.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Embark
If a unit makes a Normal Move, an Advance or it Falls Back, and every model in that unit ends that move within 3" of a friendly TRANSPORT model they can embark within it. A unit cannot embark within a TRANSPORT model that is within Engagement Range of enemy models, and it cannot embark if it has already disembarked from a TRANSPORT model in the same phase. Remove the unit from the battlefield and place it to one side – it is now embarked within the model.

Units cannot normally do anything or be affected in any way while they are embarked. Unless specifically stated, other units’ abilities have no effect on units while they are embarked, and Stratagems cannot be used to affect units while they are embarked. For all rules purposes, units that are embarked within a TRANSPORT model that has made a Normal Move, Advanced, Fallen Back or Remained Stationary also count as having made the same kind of move that turn.

  • Units can embark in a friendly TRANSPORT if every model ends a Normal Move, an Advance or a Fall Back within 3" of it.
  • A unit cannot embark within a TRANSPORT that is within Engagement Range of any enemy models.
  • A unit cannot embark and disembark in the same phase.
  • Units cannot do anything, or be affected in any way, while they are embarked within a TRANSPORT.
Dense Cover
If this terrain feature is at least 3" in height, then subtract 1 from the hit roll when resolving an attack with a ranged weapon unless you can draw straight lines, 1mm in thickness, to every part of at least one model’s base (or hull) in the target unit from a single point on the attacking model's base (or hull) without any of those lines passing over or through any part of any terrain feature with this trait. Models that are on or within an Area Terrain feature with this trait do not suffer this penalty if the only terrain feature these lines pass over or through is the terrain feature that the attacking model is on or within. Models within 3" of an Obstacle terrain feature with this trait do not suffer this penalty if the only terrain feature these lines pass over or through is the terrain feature that the attacking model is within 3" of. The height of a terrain feature is measured from the highest point on that terrain feature.

Models do not suffer this penalty to their hit rolls when making an attack with a ranged weapon that targets an AIRCRAFT unit, or a unit that includes any models with a Wounds (W) characteristic of 18 or more, even if this terrain feature is between it and the firing model (note that the reverse is not true).

  • Subtract 1 from hit rolls made for ranged weapons if at least 3” tall.
  • Does not apply to models that are only shooting through their own terrain feature.
  • No penalty when shooting at AIRCRAFT and units with W characteristic of 18+.
Obscuring
If this terrain feature is at least 5" in height, then models cannot see through or over this terrain feature. This means that one model is not visible to another if you cannot draw a straight line, 1mm in thickness, between them without it passing through or over any part of this terrain feature. The height of a terrain feature is measured from the highest point on that terrain feature.

Models that are on or within terrain feature can see, and can be seen and targeted normally. AIRCRAFT models, and models with a Wounds (W) characteristic of 18 or more, are visible and can be targeted even if this terrain feature is in-between it and the firing model (note that the reverse is not true).

  • Blocks visibility if at least 5” tall.
  • Models on or within can see and be seen normally.
  • AIRCRART and models with W characteristic of 18+ can be seen normally.
Gaining Miracle Dice
You gain one Miracle dice at the beginning of each battle round, and you gain one at the end of a phase if one or more of the following conditions are met one or more times during that phase:

Vengeance: A unit from your army with the Acts of Faith ability destroys an enemy unit.

Sacrifice: A CHARACTER unit from your army with the Acts of Faith ability is destroyed.

Purity: A psychic power is resisted by a unit from your army with the Acts of Faith ability (without performing an Act of Faith to do so, as described below).

Valour: You roll an unmodified 1 for a Morale test taken for a unit with the Acts of Faith ability (without performing an Act of Faith to do so, as described below).

When you gain a Miracle dice, roll one D6. The number you roll is the value of that Miracle dice. This value cannot be changed unless a rule states otherwise. Keep your Miracle dice to one side – this is your Miracle dice pool.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Performing an Act of Faith
Before making a dice roll for a model or unit from your army with the Acts of Faith ability, you can choose to use one or more of the dice from your Miracle dice pool instead. For each individual dice that is being rolled as part of the dice roll, you can select one Miracle dice from your Miracle dice pool to be substituted in place of that dice. The dice that it is being substituted for is not rolled, and instead the value of the chosen Miracle dice is used as if it had been rolled. Once all Miracle dice substitutions have been made, remove the chosen Miracle dice from your Miracle dice pool, and roll any remaining, unsubstituted dice that are a part of the dice roll.

You can use Miracle dice to perform an Act of Faith for any of the following types of dice roll:

Advance roll
Charge roll
Deny the Witch test
Hit roll
Wound roll
Saving throw
• Damage roll
Morale test

For example, instead of rolling a D6 to see what value is added to a unit’s Move characteristic when that unit Advances, you could use a dice from your Miracle dice pool. If the value of that dice was 5, you would add 5" to the Move characteristic of all models in the unit for that Movement phase.

A Miracle dice is not a modifier or an inherently modified dice (so, for example, if you use a Miracle dice with a value of 1 for a Morale test, that is considered to be an unmodified roll of 1).

When re-rolling a dice roll, no new Miracle dice may be substituted. The number and values of any Miracle dice that have already been substituted in the dice roll remain the same for the re-roll.
Acts of Faith

Through the prayers of the faithful is the Emperor’s will made manifest.

If your army contains at least one unit with this ability, you can perform one Act of Faith in each phase. To do so, you will use Miracle dice.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
Psychic Tests
When a PSYKER unit attempts to manifest a psychic power, you must take a Psychic test for that unit by rolling 2D6. If the total is equal to or greater than that power’s warp charge value, the Psychic test is passed. If you roll a double 1 or a double 6 when taking a Psychic test, that unit immediately suffers Perils of the Warp.

  • Psychic test: Passed if 2D6 equals or exceeds psychic power’s warp charge.
  • If double 1 or double 6 rolled, PSYKER suffers Perils of the Warp.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
Command Points
The starting number of CPs each player starts with for Battle-forging their army depends on the size of the battle you are playing. This is usually defined in the mission pack that is being played, but if one is not presented in the mission pack, use the following table. Note that the total Power Level is based on the combined power of all the models used in the battle (so the combined Power Level of both your and your opponent's armies). If you are using a game that uses points values, then the points limit is the maximum points limit per side.

COMMAND POINTS
BATTLE SIZETOTAL POWER LEVELPOINTS LIMITCOMMAND POINTS
Combat PatrolUp to 50Up to 5003
Incursion51-100501-10006
Strike Force101-2001001-200012
Onslaught201-3002001-300018

  • Starting number of Command points varies with battle size.
© Vyacheslav Maltsev 2013-2021