Soulblight Gravelords – Neferata, Mortarch of Blood
This warscroll does not meet the selection criteria (see Settings tab).
12
3+
10
WARSCROLL

Neferata, Mortarch of Blood

First amongst the Soulblight vampires, Neferata is a true monarch of the dead. In battle, the Nulahmian queen fights with a cruel, merciless intensity, the enemy’s greatest warriors torn apart by a blur of precise and deadly strikes.
MELEE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Akmet-har
Akmet-har1"52+3+-11
Aken-seth
Aken-seth1"22+3+-22
Abyssal Talons
Abyssal Talons1"4+3+-22
Spectral Claws and Daggers
Spectral Claws and Daggers1"65+4+-1
DAMAGE
Wounds SufferedMoveAbyssal Talons
0-216"6
3-413"5
5-610"4
7-87"3
9+4"2
PITCHED BATTLE PROFILE

Unit Size: 1      Points: 365
Battlefield Role: Leader, Behemoth
Notes: Unique

DESCRIPTION

Neferata is a named character that is a single model. She is armed with Akmet-har and Aken-seth.

If this model is included in a Soulblight Gravelords army with the LEGION OF BLOOD lineage keyword, this model is treated as a general in addition to the model that is chosen to be the army general.

MOUNT: Neferata’s dread abyssal, Nagadron, attacks with its Abyssal Talons.

COMPANION: Neferata is accompanied by a host of spirits that attack with their Spectral Claws and Daggers. For rules purposes, they are treated in the same manner as a mount.

FLY: Neferata can fly.

ABILITIES

Dagger of Jet: The dagger Akmet-har has been employed in many of Nulahmia’s most sordid blood rituals and is capable of killing with the merest scratch.
At the end of any phase, if any wounds inflicted by this model’s Akmet-har in that phase were allocated to an enemy HERO and not negated, and that enemy model has not been slain, roll a dice. On a 5+, that enemy HERO is slain.

Mortarch of Blood: An ancient and powerful vampire, Neferata sustains herself with the fresh blood of choice victims.
At the end of the combat phase, if any enemy models were slain by wounds inflicted by this model’s attacks in that phase, you can heal up to D6 wounds allocated to this model.

Frightful Touch: The malign spirits that surround Neferata can freeze an opponent’s blood with a single touch.
If the unmodified hit roll for an attack made with this model’s Spectral Claws and Daggers is 6, that attack inflicts 1 mortal wound on the target and the attack sequence ends (do not make a wound or save roll).

MAGIC

Neferata is a WIZARD. She can attempt to cast 2 spells in your hero phase and attempt to unbind 2 spells in the enemy hero phase. She knows the Arcane Bolt, Mystic Shield and Dark Mist spells.

Dark Mist: At Neferata’s arcane command, tendrils of dark mist coil around her minions, rendering their corporeal forms as insubstantial as smoke.
Dark Mist has a casting value of 6. If successfully cast, pick 1 friendly SOULBLIGHT GRAVELORDS unit wholly within 12" of the caster. Ignore negative modifiers when making save rolls for attacks that target that unit until your next hero phase.

COMMAND ABILITIES

Twilight’s Allure: Neferata cloaks her minions in a penumbral gloom, shrouding the progress of her insidious schemes until it is too late to halt them.
You can use this command ability once per turn in your hero phase. If you do so, subtract 1 from hit rolls for attacks made with melee weapons that target friendly SOULBLIGHT GRAVELORDS units wholly within 12" of this model until your next hero phase.

KEYWORDS
DEATH, VAMPIRE, SOULBLIGHT GRAVELORDS, DEATHLORDS, LEGION OF BLOOD, MONSTER, HERO, WIZARD, MORTARCH, NEFERATA
Named Characters
Named characters such as Nagash, Archaon and Alarielle are singular and mighty warriors, with their own personalities and artefacts of power. As such, these models cannot have a command trait or artefact of power.
Mounts
Sometimes the description for a model will include information about the model having a mount, such as a battle steed, a powerful monster that they can ride, or a massive war machine that they can stand upon. Note that when the model is slain both the rider and their mount are removed.
Flying
If the warscroll for a model says that the model can fly, it can pass across models and terrain features as if they were not there when it makes any type of move. Any vertical distance up and/or down is ignored when measuring a flying model’s move. It cannot finish the move on top of another model.
Healing Wounds
Some abilities allow wounds that have been allocated to a model to be healed. For each wound that is healed, remove one of the wounds that have been allocated to the model. You can’t heal wounds on a model that has been slain.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Arcane Bolt
Arcane Bolt has a casting value of 5. If successfully cast, pick an enemy unit within 18" of the caster that is visible to them. That unit suffers 1 mortal wound. If the casting roll was 10 or more, the unit suffers D3 mortal wounds instead.
Mystic Shield
Mystic Shield has a casting value of 6. If successfully cast, pick a friendly unit within 18" of the caster that is visible to them. Re-roll save rolls of 1 for that unit until your next hero phase.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Command Abilities
If you have any HEROES in your army, you can use command abilities. Some command abilities are available to all armies, like the three on the right, while others are specific to certain models and appear on their warscroll. Some of these command abilities can only be used if that model is your general; when this is the case, it will be noted in the rules for the command ability.

In order to use any command ability you must spend 1 command point. You start the battle with 1 command point for each warscroll battalion you have in your army. In addition, you receive 1 command point at the start of each of your hero phases. You can use the same command ability several times in the same phase as long as you have enough command points to do so. Any command points you do not use can be used in a future turn. A command ability will usually specify when it is used; if it does not, it is used in your hero phase.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Melee Weapons
In order to make an attack with a melee weapon, a model must be in range of the target unit.

The DEATHLORDS keyword is used in following Soulblight Gravelords warscrolls:

Leader, Behemoth

The MONSTER keyword is used in following Soulblight Gravelords warscrolls:

Leader
Leader, Behemoth
Behemoth

The MORTARCH keyword is used in following Soulblight Gravelords warscrolls:

Leader, Behemoth
© Vyacheslav Maltsev 2013-2021