Soulblight Gravelords – Bloodseeker Palanquin
This warscroll does not meet the selection criteria (see Settings tab).
12
4+
10
WARSCROLL

Bloodseeker Palanquin

From atop macabre conveyances known as Bloodseeker Palanquins, the Sanguinarchs refine the art of blood-blending. In battle, they violently exsanguinate worthy champions, using their ichor in crimson concoctions to invigorate their vampiric kin.
MISSILE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Wail of the Damned
Wail of the Damned
See below
MELEE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Bloodletting Blade
Bloodletting Blade1"43+3+-1D3
Spectral Claws and Blades
Spectral Claws and Blades1"5+4+-1
DAMAGE
Wounds SufferedMoveWail of the DamnedSpectral Claws and Blades
0-214"12"12
3-412"10"10
5-710"8"8
8-98"6"6
10+6"4"4
PITCHED BATTLE PROFILE

Unit Size: 1      Points: 290
Battlefield Role: Leader, Behemoth
Base size: 120 x 92mm

BATTALIONS

This warscroll can be used in following warscroll battalions:
 • Red Banqueters

DESCRIPTION

A Bloodseeker Palanquin is a single model ridden by a Sanguinarch armed with a Bloodletting Blade.

MOUNT: This model’s Spectral Host attacks with their Wail of the Damned and Spectral Claws and Blades.

FLY: This model can fly.

ABILITIES

A Fine Vintage: Sanguinarchs are obsessed with sampling the finest blood vintages and can further refine and blend such rich pickings to augment their followers.
If an enemy HERO is slain within 9" of this model, add 1 to the Attacks characteristic of melee weapons used by friendly VAMPIRE units wholly within 12" of this model until your next hero phase.

Frightful Touch: The malign spirits that surround the Bloodseeker Palanquin can freeze an opponent’s blood with a single touch.
If the unmodified hit roll for an attack made with this model’s Spectral Claws and Blades is 6, that attack inflicts 1 mortal wound on the target and the attack sequence ends (do not make a wound or save roll).

Wail of the Damned: Unnerving howls follow this carriage wherever it roams. Should an enemy get close enough, the spectral host unleashes a deafening wail that tears the soul apart.
Do not use the attack sequence for an attack made with a Wail of the Damned. Instead, roll a dice for each enemy unit within range of this model’s Wail of the Damned. On a 4+, that unit suffers D3 mortal wounds.

MAGIC

This model is a WIZARD. It can attempt to cast 1 spell in your hero phase and attempt to unbind 1 spell in the enemy hero phase. It knows the Arcane Bolt, Mystic Shield and Blood Siphon spells.

Blood Siphon: With a contemptuous gesture, the Sanguinarch calls forth a torrent of blood from their victim’s eyes, nose and mouth.
Blood Siphon has a casting value of 6. If successfully cast, pick 1 enemy HERO within 12" of the caster that is visible to them and roll a dice. On a 1-2, the target suffers 1 mortal wound. On a 3-4, the target suffers D3 mortal wounds. On a 5-6, the target suffers D6 mortal wounds.

KEYWORDS
DEATH, VAMPIRE, MALIGNANT, SOULBLIGHT GRAVELORDS, HERO, WIZARD, BLOODSEEKER PALANQUIN
Flying
If the warscroll for a model says that the model can fly, it can pass across models and terrain features as if they were not there when it makes any type of move. Any vertical distance up and/or down is ignored when measuring a flying model’s move. It cannot finish the move on top of another model.
Melee Weapons
In order to make an attack with a melee weapon, a model must be in range of the target unit.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Arcane Bolt
Arcane Bolt has a casting value of 5. If successfully cast, pick an enemy unit within 18" of the caster that is visible to them. That unit suffers 1 mortal wound. If the casting roll was 10 or more, the unit suffers D3 mortal wounds instead.
Mystic Shield
Mystic Shield has a casting value of 6. If successfully cast, pick a friendly unit within 18" of the caster that is visible to them. Re-roll save rolls of 1 for that unit until your next hero phase.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.

The MALIGNANT keyword is used in following Soulblight Gravelords warscrolls:

Leader, Behemoth
Behemoth
© Vyacheslav Maltsev 2013-2021