Soulblight Gravelords – Belladamma Volga, First of the Vyrkos
This warscroll does not meet the selection criteria (see Settings tab).
10"
9
4+
10
WARSCROLL

Belladamma Volga, First of the Vyrkos

Little is known of the mysterious First of the Vyrkos. When she and her lupine packs hunt, the enemy is overcome by a storm of savage claws and slavering fangs, their champions hideously transfigured by the cruel and ancient matriarch.
MELEE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Timeworn Scimitar
Timeworn Scimitar1"33+3+-1D3
Lupine Fangs and Claws
Lupine Fangs and Claws1"64+4+-1
PITCHED BATTLE PROFILE

Unit Size: 1      Points: 200
Battlefield Role: Leader
Notes: Unique

DESCRIPTION

Belladamma Volga is a named character that is a single model. She is armed with a Timeworn Scimitar.

If this model is included in a Soulblight Gravelords army with the VYRKOS DYNASTY lineage keyword, this model is treated as a general in addition to the model that is chosen to be the army general.

MOUNT: Belladamma’s wolves attack with their Lupine Fangs and Claws.

ABILITIES

The Hunger: Soulblight creatures crave the taste of blood and are empowered when they drink deep from the veins of defeated foes.
At the end of the combat phase, if any enemy models were slain by wounds inflicted by this model’s attacks in that phase, you can heal up to D3 wounds allocated to this model.

First of the Vyrkos: Belladamma wields all manner of strange and potent sorceries, many known only to the Elders of the Vyrkos. She uses these to bind packs of Dire Wolves to her service that will unthinkingly sacrifice themselves to protect their savage mistress.
Add 1 to casting, dispelling and unbinding rolls for this model. In addition, roll a dice before you allocate a wound or mortal wound to this model if it is within 3" of any friendly DIRE WOLVES units. On a 3+, that wound or mortal wound is allocated to 1 of those units instead of this model.

MAGIC

Belladamma is a WIZARD. She can attempt to cast 2 spells in your hero phase and attempt to unbind 2 spells in the enemy hero phase. She knows the Arcane Bolt, Mystic Shield, Lycancurse and Under a Killing Moon spells.

Lycancurse: Singling out a choice foe, Belladamma’s gnarled hand curls into a fist, lupine eyes watching as her victim’s bones are crushed and warped into a form more pleasing to her.
Lycancurse has a casting value of 7. If successfully cast, pick 1 enemy unit within 18" of the caster that is visible to them. That unit suffers D3 mortal wounds. If any models in that unit were slain by this spell, before removing the last slain model, you can add 1 unit of DIRE WOLVES to your army. The number of models in the new unit must be equal to the number of models in the enemy unit that were slain by this spell. Set up the new unit within 3" of the slain model’s unit, and then remove the slain model from play.

Under a Killing Moon: The skies clear as a full and eerie moon rises to illuminate the battlefield. A synchronised howl echoes far and wide as the bestial warriors of the Vyrkos unleash their rage.
Under a Killing Moon has a casting value of 6. If successfully cast, until your next hero phase, if the unmodified hit roll for an attack made with a melee weapon by a friendly SOULBLIGHT GRAVELORDS unit wholly within 12" of the caster is 6, that attack inflicts 2 hits on the target instead of 1. Make a wound and save roll for each hit.

COMMAND ABILITIES

Pack Alpha: The Dire Wolves of Belladamma’s pack are amongst the most savage of their kind and will fall upon their foes with a slavering intensity.
You can use this command ability at the start of your hero phase. If you do so, pick 1 friendly DIRE WOLVES unit wholly within 12" of this model. That unit is eligible to fight in the combat phase if it is within 6" of an enemy unit instead of 3", and it can move an extra 3" when it piles in.

KEYWORDS
DEATH, VAMPIRE, SOULBLIGHT GRAVELORDS, VYRKOS DYNASTY, HERO, WIZARD, VAMPIRE LORD, BELLADAMMA VOLGA
Named Characters
Named characters such as Nagash, Archaon and Alarielle are singular and mighty warriors, with their own personalities and artefacts of power. As such, these models cannot have a command trait or artefact of power.
Healing Wounds
Some abilities allow wounds that have been allocated to a model to be healed. For each wound that is healed, remove one of the wounds that have been allocated to the model. You can’t heal wounds on a model that has been slain.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Unbinding and Dispelling
A WIZARD can attempt to unbind an endless spell when it is initially cast as normal. In addition, a WIZARD can attempt to dispel one endless spell at the start of each of their hero phases. If a wizard attempts to dispel an endless spell, they can attempt to cast one less spell than normal that phase.

In order to dispel an endless spell, first pick an endless spell model within 30" of the wizard and visible to them, and then roll 2D6. If the roll is greater than the casting value of the spell, the endless spell is dispelled. An endless spell model cannot be subjected to more than one dispel attempt per hero phase.

When an endless spell is dispelled its model is removed from play; the model can then be used again if the same endless spell is successfully cast later in the battle.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Allocating Wounds
Once all of a unit’s attacks have been resolved, add up the damage that was inflicted. The player commanding the target unit must then allocate a number of wounds to the target unit equal to the damage that was inflicted.

Wounds are allocated one at a time to models in the target unit. You can allocate the wounds inflicted on your units as you see fit (the models do not have to be within range or visible to the attacking unit). However, if you allocate a wound to a model, you must keep on allocating wounds to that model until it is slain – a unit can never have more than one wounded model.

Some abilities allow you to make a roll to negate a wound or mortal wound allocated to a model; in this case the roll is made for each individual wound or mortal wound as it is allocated to the model in question. If the wound or mortal wound is negated it has no effect on the model.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.

The DIRE WOLVES keyword is used in following Soulblight Gravelords warscrolls:

Battleline
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Arcane Bolt
Arcane Bolt has a casting value of 5. If successfully cast, pick an enemy unit within 18" of the caster that is visible to them. That unit suffers 1 mortal wound. If the casting roll was 10 or more, the unit suffers D3 mortal wounds instead.
Mystic Shield
Mystic Shield has a casting value of 6. If successfully cast, pick a friendly unit within 18" of the caster that is visible to them. Re-roll save rolls of 1 for that unit until your next hero phase.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.

The DIRE WOLVES keyword is used in following Soulblight Gravelords warscrolls:

Battleline
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Melee Weapons
In order to make an attack with a melee weapon, a model must be in range of the target unit.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Command Abilities
If you have any HEROES in your army, you can use command abilities. Some command abilities are available to all armies, like the three on the right, while others are specific to certain models and appear on their warscroll. Some of these command abilities can only be used if that model is your general; when this is the case, it will be noted in the rules for the command ability.

In order to use any command ability you must spend 1 command point. You start the battle with 1 command point for each warscroll battalion you have in your army. In addition, you receive 1 command point at the start of each of your hero phases. You can use the same command ability several times in the same phase as long as you have enough command points to do so. Any command points you do not use can be used in a future turn. A command ability will usually specify when it is used; if it does not, it is used in your hero phase.

The DIRE WOLVES keyword is used in following Soulblight Gravelords warscrolls:

Battleline
Piling In
A unit can make a pile-in move if it is within 3" of an enemy unit or has made a charge move in the same turn. If this is the case, you can move each model in the unit up to 3". Each model must finish its pile-in move at least as close to the nearest enemy model as it was at the start of the move.

The VAMPIRE LORD keyword is used in following Soulblight Gravelords warscrolls:

Leader
Leader, Behemoth
© Vyacheslav Maltsev 2013-2021