Slaves to Darkness – Be’lakor, the Dark Master
This warscroll does not meet the selection criteria (see Settings tab).
14
4+
10
WARSCROLL

Be’lakor, the Dark Master

A winged nightmare wreathed in darkness and redolent with terrible power, Be’lakor strides forth to subjugate the Mortal Realms and bring them under his tyrannical rule. With shadow magic and daemonic might he obliterates his foes, revelling in their agonised death throes.
MELEE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Blade of Shadows
Blade of Shadows2"3+3+-22
Fell Claw
Fell Claw1"13+3+-12
Spearing Tail
Spearing Tail3"12+-32
DAMAGE
Wounds SufferedMoveBlade of ShadowsSpearing Tail
0-314"81+
4-612"72+
7-810"63+
9-108"54+
11+6"45+
PITCHED BATTLE PROFILE

Unit Size: 1      Points: 380
Battlefield Role: Leader, Behemoth
Notes: Unique

DESCRIPTION

Be’lakor, the Dark Master, is a named character that is a single model. Be’lakor is armed with the Blade of Shadows, a Fell Claw and a Spearing Tail.

FLY: This model can fly.

ABILITIES

The Dark Master: Many puppets dance on Be’lakor’s infernal strings, though few realise as much until their fate is sealed.
Once per battle, at the start of the enemy hero phase, you can pick 1 enemy unit on the battlefield. Until your next hero phase, at the start of each phase (including the phase in which the unit was picked), you can roll a dice for that unit. On a 3+, that unit cannot move, shoot, fight, use command abilities, chant prayers, attempt to cast spells, attempt to dispel endless spells or attempt to unbind spells in that phase.

Lord of Torment: Be’lakor is invigorated by the suffering and terror of mortals.
If an enemy unit fails a battleshock test while it is within 12" of this model, you can heal up to D3 wounds allocated to this model.

Shadow Form: Be’lakor’s can shift his physical form to be as insubstantial as the mists of Ulgu, and just as hard to land a telling blow upon.
Ignore modifiers (positive or negative) when making save rolls for attacks that target this model.

MAGIC

This model is a WIZARD. It can attempt to cast 2 spells in your hero phase and attempt to unbind 2 spells in the enemy hero phase. It knows the Arcane Bolt, Mystic Shield and Enfeeble Foe spells.

Enfeeble Foe: With a series of hissed incantations, Be’lakor instils visions of loss and despair in the minds of his enemies to drain them of their fighting spirit.
Enfeeble Foe has a casting value of 6. If successfully cast, pick 1 enemy unit within 18" of the caster and visible to them. Subtract 1 from wound rolls for attacks made with melee weapons by that unit until your next hero phase.

KEYWORDS
CHAOS, DAEMON, DAEMON PRINCE, SLAVES TO DARKNESS, UNDIVIDED, HERO, WIZARD, MONSTER, BE’LAKOR
Named Characters
Named characters such as Nagash, Archaon and Alarielle are singular and mighty warriors, with their own personalities and artefacts of power. As such, these models cannot have a command trait or artefact of power.
Flying
If the warscroll for a model says that the model can fly, it can pass across models and terrain features as if they were not there when it makes any type of move. Any vertical distance up and/or down is ignored when measuring a flying model’s move. It cannot finish the move on top of another model.
Command Abilities
If you have any HEROES in your army, you can use command abilities. Some command abilities are available to all armies, like the three on the right, while others are specific to certain models and appear on their warscroll. Some of these command abilities can only be used if that model is your general; when this is the case, it will be noted in the rules for the command ability.

In order to use any command ability you must spend 1 command point. You start the battle with 1 command point for each warscroll battalion you have in your army. In addition, you receive 1 command point at the start of each of your hero phases. You can use the same command ability several times in the same phase as long as you have enough command points to do so. Any command points you do not use can be used in a future turn. A command ability will usually specify when it is used; if it does not, it is used in your hero phase.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Unbinding and Dispelling
A WIZARD can attempt to unbind an endless spell when it is initially cast as normal. In addition, a WIZARD can attempt to dispel one endless spell at the start of each of their hero phases. If a wizard attempts to dispel an endless spell, they can attempt to cast one less spell than normal that phase.

In order to dispel an endless spell, first pick an endless spell model within 30" of the wizard and visible to them, and then roll 2D6. If the roll is greater than the casting value of the spell, the endless spell is dispelled. An endless spell model cannot be subjected to more than one dispel attempt per hero phase.

When an endless spell is dispelled its model is removed from play; the model can then be used again if the same endless spell is successfully cast later in the battle.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Battleshock test, battleshock roll
In the battleshock phase, both players must take battleshock tests for units from their army that have had models slain during the turn. The player whose turn it is tests first.

You must make a battleshock roll for each unit that has to take a battleshock test. To make a battleshock roll, roll a dice. Add the number of models from the unit that have been slain this turn to the dice roll, and add 1 to the unit’s Bravery characteristic for every 10 models that are in the unit when the test is taken.

If the modified battleshock roll is greater than the unit’s modified Bravery characteristic, the battleshock test has been failed. If the test is failed, for each point by which the modified roll exceeds the unit’s modified Bravery characteristic, one model in that unit must flee. You decide which of the models from your units flee – remove them from play and count them as having been slain.
Healing Wounds
Some abilities allow wounds that have been allocated to a model to be healed. For each wound that is healed, remove one of the wounds that have been allocated to the model. You can’t heal wounds on a model that has been slain.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Arcane Bolt
Arcane Bolt has a casting value of 5. If successfully cast, pick an enemy unit within 18" of the caster that is visible to them. That unit suffers 1 mortal wound. If the casting roll was 10 or more, the unit suffers D3 mortal wounds instead.
Mystic Shield
Mystic Shield has a casting value of 6. If successfully cast, pick a friendly unit within 18" of the caster that is visible to them. Re-roll save rolls of 1 for that unit until your next hero phase.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Melee Weapons
In order to make an attack with a melee weapon, a model must be in range of the target unit.

The DAEMON keyword is used in following Slaves to Darkness warscrolls:

None
• Furies
Leader
Leader, Behemoth
Behemoth

The DAEMON PRINCE keyword is used in following Slaves to Darkness warscrolls:

Leader
Leader, Behemoth

The WIZARD keyword is used in following Slaves to Darkness warscrolls:

Leader
Leader, Behemoth

The MONSTER keyword is used in following Slaves to Darkness warscrolls:

None
Leader, Behemoth
Behemoth
© Vyacheslav Maltsev 2013-2021