Seraphon – The Starblood Stalkers
This warscroll does not meet the selection criteria (see Settings tab).
8"
1
6+
5
WARSCROLL

The Starblood Stalkers

The Starblood Stalkers are a pack of masterful skink hunters who pursue their foes into even the densest terrain before striking. Their cunning, bolstered by the camouflage of the Chameleon Skink Otapatl, has seen them take even the most cautious enemies by surprise.
MISSILE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Meteoric Javelin
Meteoric Javelin8"15+4+-1
Dartpipe
Dartpipe16"23+4+-1
Boltspitter
Boltspitter16"15+5+-1
MELEE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Celestite Dagger
Celestite Dagger1"15+5+-1
Moonstone Club
Moonstone Club1"14+3+-1
PITCHED BATTLE PROFILE

Unit Size: 4      Points: 225
Battlefield Role: Leader
Notes: Unique. Kixi-Taka the Diviner, Klaq-Trok and The Starblood Stalkers must be taken as a set for a total of 225 points. Although taken as a set, each is a separate unit.

DESCRIPTION

The Starblood Stalkers is a unit that has 4 models. Xepic is armed with a Moonstone Club and Star-buckler; Huachi is armed with a Meteoric Javelin, Celestite Dagger and Starbuckler; Tok is armed with a Boltspitter and Moonstone Club; and Otapatl is armed with a Dartpipe and Celestite Dagger.

ABILITIES

Chameleon Ambush: Chameleon Skinks can blend with their surroundings and go into hiding. Otapatl uses this talent to guide the rest of the Starblood Stalkers to well-chosen hiding places.
Instead of setting up this unit, KIXI-TAKA and KLAQ-TROK on the battlefield, you can place them to one side and say that they are hiding as reserve units. If you do so, at the end of any of your movement phases, you can set up this unit, KIXI-TAKA and KLAQ-TROK on the battlefield more than 9" from any enemy units and wholly within 9" of each other.

Any reserve units that are in hiding and not on the battlefield at the start of the fourth battle round are slain.

Star-buckler: Some skinks carry bucklers as resilient as the scales of a Stardrake.
Add 1 to save rolls for attacks that target this unit while at least half of the models are armed with Star-bucklers.

Star-venom: The darts used by Chameleon Skinks are coated in deadly toxins.
If the unmodified hit roll for an attack made with a Dartpipe is 6, that attack inflicts 1 mortal wound on the target and the attack sequence ends (do not make a wound or save roll).

KEYWORDS
ORDER, SERAPHON, COALESCED, THUNDER LIZARD, SKINK, STARBLOOD STALKERS

The KIXI-TAKA keyword is used in following Seraphon warscrolls:

Leader

The KLAQ-TROK keyword is used in following Seraphon warscrolls:

Leader
Reserves
Reserves are units that are part of your army, but which have an ability that allows you to set them up in a location other than on the battlefield and deploy them later once the battle has begun. Setting up a reserve unit is not considered a move for the unit, but it may restrict a unit’s ability to move in the same turn. Any reserves that have not been set up when the battle ends are treated as if they had been slain when you are working out which side won the battle.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.

The SKINK keyword is used in following Seraphon warscrolls:

Army List
Warscrolls collated
© Vyacheslav Maltsev 2013-2021