Lumineth Realm-lords – The Light of Eltharion
This warscroll does not meet the selection criteria (see Settings tab).
6"
7
3+
10
WARSCROLL

The Light of Eltharion

Eltharion has no physical form, only a spiritual essence given uncanny strength through Teclis’ magic. An ancestor of the Lumineth race, his avenging spirit is a puissant warrior and an inspiring hero to those aelves who witness his shining light.
MELEE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Fangsword of Eltharion
Fangsword of Eltharion1"42+3+-3D3
Celennari Blade
Celennari Blade1"22+3+-1D3
PITCHED BATTLE PROFILE

Unit Size: 1      Points: 220
Battlefield Role: Leader
Notes: Unique

BATTALIONS

This warscroll can be used in following warscroll battalions:
 • Teclian Vanguard

DESCRIPTION

The Light of Eltharion is a named character that is a single model. He is armed with the Fangsword of Eltharion and the Celennari Blade, and he wears Spirit Armour.

ABILITIES

Celennari Blade: This blade was forged by Teclis using Celennar’s scryer-stone ores. The lunar gem in its hilt allows the bearer to predict where an opponent will be most vulnerable.
At the start of the combat phase, you can pick 1 enemy HERO within 3" of this model. If you do so, add 1 to the damage inflicted by successful attacks made with this model’s Celennari Blade that target that HERO in that phase.

Fangsword of Eltharion: The original Fangsword was a powerful heirloom of Eltharion’s mortal dynasty. The incarnation of the Fangsword wielded by the Light of Eltharion is crafted from sunmetal and has a solar jewel in its hilt, making it even mightier than the sword whose legacy it propagates.
Add 1 to wound rolls for attacks made with this model’s Fangsword of Eltharion if this model made a charge move in the same turn. In addition, if the unmodified wound roll for an attack made with this model’s Fangsword of Eltharion is 6, that attack inflicts 1 mortal wound on the target in addition to any normal damage.

Searing Darts of Light: Darts of brilliance hurtle from the Light of Eltharion’s outstretched fingers, shooting through nearby enemies.
In your shooting phase, you can pick 1 enemy unit within 18" of this model that is visible to them and roll a dice. On a 1, nothing happens. On a 2-4, that unit suffers D3 mortal wounds. On a 5+, that unit suffers D6 mortal wounds.

Spirit Armour: Instead of protecting a body of flesh and blood, this armour houses the undying spirit of the mighty warrior Eltharion. Though animated by the Light of Eltharion, it is essentially hollow – even a penetrating thrust may simply pass through the glowing form within.
Ignore modifiers (positive or negative) when making save rolls for attacks that target this model. In addition, halve the damage inflicted by attacks made with missile weapons or melee weapons that target this model (rounding up).

Supreme Swordmaster: The Light of Eltharion is a consummate warrior and one of the greatest swordsmen of all time.
Ignore negative modifiers when making hit rolls for attacks made by this model. In addition, if the unmodified hit roll for an attack made by this model is 6, that attack scores 2 hits on the target instead of 1. Make a wound and save roll for each hit.

COMMAND ABILITIES

Unflinching Valour: The Light of Eltharion can communicate telepathically with the warriors of the Lumineth Realm-lords, instilling them with his own dour certainty and unwavering courage.
You can use this command ability at the start of the battleshock phase. If you do so, pick 1 friendly model with this command ability. Until the end of that phase, all friendly LUMINETH REALM-LORDS units wholly within 24" of that model are treated as having a Bravery characteristic of 10.

KEYWORDS
ORDER, AELF, LUMINETH REALM-LORDS, HERO, LIGHT OF ELTHARION
Named Characters
Named characters such as Nagash, Archaon and Alarielle are singular and mighty warriors, with their own personalities and artefacts of power. As such, these models cannot have a command trait or artefact of power.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Charge roll, charge move
Any of your units within 12" of the enemy in your charge phase can attempt to make a charge move. Pick an eligible unit and make a charge roll for it by rolling 2D6. Each model in the unit can move a number of inches equal to the charge roll. You cannot make a charge move with a unit that has run or retreated earlier in the turn, or with a unit that is within 3" of an enemy unit.

The first model you move from a unit making a charge move must finish the move within ½" of an enemy model (you do not have to pick the target for the charge before making the charge roll). If that’s impossible, or you decide not to make the charge move, the charge fails and no models in the unit can move in this phase.

Once all models in one unit have made their charge moves, you can pick another eligible unit to make a charge attempt, until all units that you want to make charge attempts have done so.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Missile Weapons
In order to attack with a missile weapon, the model using the weapon must be in range of the target unit (i.e. within the maximum distance, in inches, of the Range listed for the weapon making the attack), and the target unit must be visible to the model with the weapon (if unsure, stoop down and look from behind the shooting model to see if a model from the target unit is visible). For the purposes of determining visibility, a model can see through other models in its unit.

Some missile weapons have a Range characteristic with a minimum range, for example 6"-48". Such weapons cannot attack units that are wholly within the shorter range.
Melee Weapons
In order to make an attack with a melee weapon, a model must be in range of the target unit.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Command Abilities
If you have any HEROES in your army, you can use command abilities. Some command abilities are available to all armies, like the three on the right, while others are specific to certain models and appear on their warscroll. Some of these command abilities can only be used if that model is your general; when this is the case, it will be noted in the rules for the command ability.

In order to use any command ability you must spend 1 command point. You start the battle with 1 command point for each warscroll battalion you have in your army. In addition, you receive 1 command point at the start of each of your hero phases. You can use the same command ability several times in the same phase as long as you have enough command points to do so. Any command points you do not use can be used in a future turn. A command ability will usually specify when it is used; if it does not, it is used in your hero phase.
Battleshock test, battleshock roll
In the battleshock phase, both players must take battleshock tests for units from their army that have had models slain during the turn. The player whose turn it is tests first.

You must make a battleshock roll for each unit that has to take a battleshock test. To make a battleshock roll, roll a dice. Add the number of models from the unit that have been slain this turn to the dice roll, and add 1 to the unit’s Bravery characteristic for every 10 models that are in the unit when the test is taken.

If the modified battleshock roll is greater than the unit’s modified Bravery characteristic, the battleshock test has been failed. If the test is failed, for each point by which the modified roll exceeds the unit’s modified Bravery characteristic, one model in that unit must flee. You decide which of the models from your units flee – remove them from play and count them as having been slain.
© Vyacheslav Maltsev 2013-2021