Cities of Sigmar – Galen ven Denst
 ]
This warscroll does not meet the selection criteria (see Filter combo-box or Settings tab).
6"
5
4+
8
WARSCROLL

Galen ven Denst

As an agent of Azyr, Galen ven Denst has executed hundreds of Chaos cultists and living dead over the course of his career. His stoicism and agility is impressive, his skill with spell-banishing pistol and runic broadsword all the more so.
MISSILE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Pistol
Pistol9"33+3+-11
MELEE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Broadsword
Broadsword1"63+3+-11
PITCHED BATTLE PROFILE

Unit Size: 1      Points: 115
Battlefield Role: Leader
Base size: 28mm
Notes: Unique

DESCRIPTION

Galen ven Denst is a named character that is a single model. He is armed with a Pistol and Broadsword.

ABILITIES

Grim Resolve: Witch hunters are tenacious opponents, ignoring the pain of wounds that would fell a lesser person.
Roll a dice each time you allocate a wound or mortal wound to this model. On a 5+, that wound or mortal wound is negated.

Agile Opponent: Galen is always on the move, fighting with the utmost balance and surety.
This model can retreat and still shoot and/or charge in the same turn.

Weapons of Banishment: Inlaid with nullstone and silver, Galen’s pistol shot and broadsword blade are anathema to spellcasters and their works, banishing all forms of arcane energy in a flash.
Double the Damage characteristic of an attack made with this model’s weapons if the target of that attack is a WIZARD or DAEMON.

In addition, when this model fights or shoots, you can choose an endless spell to be the target of any of its attacks. If you do so, roll a dice to see if that attack scores a hit. If it does, do not make a wound or save roll. Instead, roll 2D6. If the roll is greater than the casting value of that endless spell, that endless spell is dispelled.

KEYWORDS
ORDER, HUMAN, CITIES OF SIGMAR, HERO, WITCH HUNTER, GALEN VEN DENST
Named Characters
Named characters such as Nagash, Archaon and Alarielle are singular and mighty warriors, with their own personalities and artefacts of power. As such, these models cannot have a command trait or artefact of power.
Allocating Wounds
Once all of a unit’s attacks have been resolved, add up the damage that was inflicted. The player commanding the target unit must then allocate a number of wounds to the target unit equal to the damage that was inflicted.

Wounds are allocated one at a time to models in the target unit. You can allocate the wounds inflicted on your units as you see fit (the models do not have to be within range or visible to the attacking unit). However, if you allocate a wound to a model, you must keep on allocating wounds to that model until it is slain – a unit can never have more than one wounded model.

Some abilities allow you to make a roll to negate a wound or mortal wound allocated to a model; in this case the roll is made for each individual wound or mortal wound as it is allocated to the model in question. If the wound or mortal wound is negated it has no effect on the model.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Enemy Units and Retreats
When you make a normal move for a model, no part of the move can be within 3" of an enemy unit.

Units starting a normal move within 3" of an enemy unit can either remain stationary or retreat. If a unit retreats, it can move within 3" of an enemy, but must end the move more than 3" from all enemy units. Models in a unit that retreats can’t shoot or charge later in the same turn.
Charge roll, charge move
Any of your units within 12" of the enemy in your charge phase can attempt to make a charge move. Pick an eligible unit and make a charge roll for it by rolling 2D6. Each model in the unit can move a number of inches equal to the charge roll. You cannot make a charge move with a unit that has run or retreated earlier in the turn, or with a unit that is within 3" of an enemy unit.

The first model you move from a unit making a charge move must finish the move within ½" of an enemy model (you do not have to pick the target for the charge before making the charge roll). If that’s impossible, or you decide not to make the charge move, the charge fails and no models in the unit can move in this phase.

Once all models in one unit have made their charge moves, you can pick another eligible unit to make a charge attempt, until all units that you want to make charge attempts have done so.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Unbinding and Dispelling
A WIZARD can attempt to unbind an endless spell when it is initially cast as normal. In addition, a WIZARD can attempt to dispel one endless spell at the start of each of their hero phases. If a wizard attempts to dispel an endless spell, they can attempt to cast one less spell than normal that phase.

In order to dispel an endless spell, first pick an endless spell model within 30" of the wizard and visible to them, and then roll 2D6. If the roll is greater than the casting value of the spell, the endless spell is dispelled. An endless spell model cannot be subjected to more than one dispel attempt per hero phase.

When an endless spell is dispelled its model is removed from play; the model can then be used again if the same endless spell is successfully cast later in the battle.

The ORDER keyword is used in following Cities of Sigmar warscrolls:

The CITIES OF SIGMAR keyword is used in following Cities of Sigmar warscrolls:

The WITCH HUNTER keyword is used in following Cities of Sigmar warscrolls:

Leader
Army List
Warscrolls collated
Faction Rules
• Allies
© Vyacheslav Maltsev 2013-2021