Space Marines – Roboute Guilliman
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
19

Roboute Guilliman

NoNAME  M WS BS S T W A Ld Sv
380
Roboute Guilliman
1
380
Roboute Guilliman
8" 2+ 2+ 6 6 9 6 10 2+
Roboute Guilliman is a single model equipped with: the Emperor’s Sword; the Hand of Dominion. You can only include one of this model in your army.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Hand of Dominion (shooting)
Hand of Dominion (shooting)
24"
Rapid Fire 3
6
-1
2
-
The Emperor’s Sword
The Emperor’s Sword
Melee
Melee
+2
-4
3
When resolving an attack made with this weapon, an unmodified wound roll of 6 inflicts D3 mortal wounds on the target in addition to any other damage.
When resolving an attack made with this weapon, an unmodified wound roll of 6 inflicts D3 mortal wounds on the target in addition to any other damage.
Hand of Dominion (melee)
Hand of Dominion (melee)
Melee
Melee
x2
-3
4
-
ABILITIES
ABILITIES
Angels of Death
Armour of Fate: This model has a 3+ invulnerable save. The first time this model is destroyed, roll one D6 at the end of the phase. On a 4+, set this model back up on the battlefield as close as possible to where they were destroyed and not within Engagement Range of any enemy models, with D6 wounds remaining.
Author of the Codex: If your army is Battle-forged, you receive an additional 3 Command Points if Roboute Guilliman is your Warlord.
Master of Battle (Aura): Add 1 to Advance and charge rolls made for friendly IMPERIUM units whilst they are within 12" of Roboute Guilliman. Re-roll hit rolls of 1 for attacks made by models in friendly IMPERIUM units whilst their unit is within 12" of this model. You can re-roll Morale tests taken for friendly IMPERIUM units whilst they are within 12" of Roboute Guilliman.
XIII Primarch (Aura): You can re-roll hit rolls for attacks made by models in friendly ULTRAMARINES CORE and ULTRAMARINES CHARACTER units whilst their unit is within 6" of this model. Re-roll wound rolls of 1 for attacks made by models in friendly ULTRAMARINES CORE units whilst their unit is within 6" of this model.’
The Avenging Son: If your army is Battle-forged, this model must be your army’s WARLORD, even if another model in your army has a rule to this effect.
WARLORD TRAIT!
WARLORD TRAIT!
Nobility Made Manifest: Friendly ULTRAMARINES INFANTRY units and ULTRAMARINES BIKER units can perform a Heroic Intervention as if they were CHARACTERS whilst they are within 6" of this WARLORD.
FACTION KEYWORDS: IMPERIUM, ADEPTUS ASTARTES, ULTRAMARINES
KEYWORDS: CHARACTER, MONSTER, PRIMARCH, ROBOUTE GUILLIMAN

Datasheet-related Stratagems

ONLY IN DEATH DOES DUTY END2CP
Adeptus Astartes – Epic Deed Stratagem

Imminent death does not prevent a Space Marine from enacting his final justice upon the enemies of the Imperium.

Use this Stratagem in the Fight phase, when an ADEPTUS ASTARTES CHARACTER model from your army that has not already been selected to fight this phase is destroyed. Do not remove that model from play - it can fight after the attacking model’s unit has finished making attacks. After resolving the destroyed model’s attacks, it is then removed.
A TROPHY BESTOWED1CP
Space Wolves – Requisition Stratagem

There are few more meaningful tokens of brotherhood among the sons of Russ than the gifting of a war trophy - heavy with glory and steeped in tales of honour -from one warrior to another.

Use this Stratagem after nominating a model drawn from a Space Wolves successor Chapter to be your WARLORD. You can give one Relic of the Fang to a CHARACTER model from your army that is drawn from a Space Wolves successor Chapter instead of giving them a Special-issue Wargear Relic or a Chapter Relic from Codex: Space Marines. If you do, replace the Space Wolves keyword in all instances on that Relic (if any) with that model’s successor Chapter keyword. You can only use this Stratagem once.
HONOURED BY THE ROCK1CP
Dark Angels – Requisition Stratagem

The Dark Angels have been known to bestow their artefacts upon worthy successor Chapters.

Use this Stratagem after nominating a model drawn from a Dark Angels successor Chapter to be your WARLORD. You can give one Relic of Caliban to a CHARACTER model from your army that is drawn from a Dark Angels successor Chapter instead of giving them a Special-issue Wargear Relic. If you do, replace the DARK ANGELS keyword in all instances on that Relic (if any) with that model’s successor Chapter keyword. You can only use this Stratagem once.

This datasheet has Lords of War Battlefield Role. Full list of Space Marines units sharing same Battlefield Role follows:

RAPID FIRE
Rapid fire weapons are versatile armaments capable of aimed single shots at long range or controlled bursts of fire at close quarters.
When a model shoots a Rapid Fire weapon, double the number of attacks it makes if its target is within half the weapon’s range.

  • Double number of attacks made if target is within half range.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Angels of Death

Space Marines are amongst the finest warriors in the Imperium.

This unit has the following abilities, which are described below: And They Shall Know No Fear; Bolter Discipline; Shock Assault; Combat Doctrines.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Command Points
The starting number of CPs each player starts with for Battle-forging their army depends on the size of the battle you are playing. This is usually defined in the mission pack that is being played, but if one is not presented in the mission pack, use the following table. Note that the total Power Level is based on the combined power of all the models used in the battle (so the combined Power Level of both your and your opponent's armies). If you are using a game that uses points values, then the points limit is the maximum points limit per side.

COMMAND POINTS
BATTLE SIZETOTAL POWER LEVELPOINTS LIMITCOMMAND POINTS
Combat PatrolUp to 50Up to 5003
Incursion51-100501-10006
Strike Force101-2001001-200012
Onslaught201-3002001-300018

  • Starting number of Command points varies with battle size.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Morale Tests
To take a Morale test, roll one D6 and add the number of models from the unit that have been destroyed this turn. If the result is equal to or less than the highest Leadership (Ld) characteristic in the unit, the Morale test is passed and nothing else happens. An unmodified roll of 1 also always results in a passed Morale test, irrespective of the total result. In any other case, the Morale test is failed, one model flees that unit, and you must then take Combat Attrition tests for the remaining models in the unit. You decide which model from your unit flees – that model is removed from play and counts as having been destroyed, but it never triggers any rules that are used when a model is destroyed.

  • Morale test = D6 + number of models destroyed this turn.
  • Unmodified roll of 1 always a success (no models flee).
  • If Morale test exceeds unit’s Ld, one model flees and other models must take Combat Attrition tests.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
Performing a Heroic Intervention
When a unit performs a Heroic Intervention, you can move each model in that unit up to 3" – this is a Heroic Intervention move. Each model in the unit must finish its Heroic Intervention move closer to the closest enemy model. Remember that a unit must finish any type of move in unit coherency.

  • Heroic Intervention: Move up to 3".
  • Must end closer to the closest enemy model.
Characters
Some models have the CHARACTER keyword. These models can make Heroic Interventions in Charge Phase and are not easy targets in the Shooting Phase (see Look out, Sir, rule). If your Warlord has the CHARACTER keyword he may be able to have a Warlord Trait (see Warlord Trait section on model’s faction page).

Note that CHARACTERS cannot use their Aura Abilities while performing actions.
Army List
Datasheets collated
Faction Rules
© Vyacheslav Maltsev 2013-2021