Space Marines – Kayvaan Shrike (Legendary)
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
8

Kayvaan Shrike (Legendary)

NoNAME  M WS BS S T W A Ld Sv
150
Kayvaan Shrike
1
150
Kayvaan Shrike
12" 2+ 2+ 4 4 5 5 9 3+
Kayvaan Shrike is a single model equipped with: bolt pistol; Raven’s Talons; frag grenades; krak grenades. Only one KAYVAAN SHRIKE model can be included in your army.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Bolt pistol
Bolt pistol
12"
Pistol 1
4
0
1
-
Raven’s Talons
Raven’s Talons
Melee
Melee
User
-3
D3
When resolving an attack made with this weapon, you can re-roll the wound roll.
When resolving an attack made with this weapon, you can re-roll the wound roll.
Frag grenades
Frag grenades
6"
Grenade D6
3
0
1
Blast
Blast
Krak grenades
Krak grenades
6"
Grenade 1
6
-1
D3
-
ABILITIES
ABILITIES
Angels of Death
Chapter Master: In your Command phase, select one friendly RAVEN GUARD CORE or RAVEN GUARD CHARACTER unit within 6" of this model. Until the start of your next Command phase, each time a model in that unit makes an attack, you can re-roll the hit roll.
Winged Deliverance: You can re-roll charge rolls made for friendly RAVEN GUARD JUMP PACK units whilst they are within 6" of this model.
Jump Pack Assault: During deployment, you can set up this model high in the skies instead of setting it up on the battlefield. If you do, at the end of one of your Movement phases you can set up this model anywhere on the battlefield that is more than 9" away from any enemy models.
Iron Halo: This model has a 4+ invulnerable save.
WARLORD TRAIT!
WARLORD TRAIT!
Shadowmaster: Enemy units cannot fire Overwatch at this WARLORD.
FACTION KEYWORDS: IMPERIUM, ADEPTUS ASTARTES, RAVEN GUARD
KEYWORDS: CHARACTER, INFANTRY, CHAPTER MASTER, JUMP PACK, FLY, KAYVAAN SHRIKE

Datasheet-related Stratagems

LAY LOW THE TYRANTS1CP
Raven Guard – Battle Tactic Stratagem

Those who would abuse their strength to oppress the weak and humble are amongst the Raven Guard’s most favoured prey.

Use this Stratagem when a RAVEN GUARD INFANTRY unit or RAVEN GUARD BIKER unit from your army is chosen to fight with in the Fight phase. Until the end of the phase, when resolving an attack made by a model in that unit against a CHARACTER unit that is not a VEHICLE, or against a unit that is not a VEHICLE and contains any models with a Wounds characteristic of 4 or more, add 1 to the wound roll.
ONLY IN DEATH DOES DUTY END2CP
Adeptus Astartes – Epic Deed Stratagem

Imminent death does not prevent a Space Marine from enacting his final justice upon the enemies of the Imperium.

Use this Stratagem in the Fight phase, when an ADEPTUS ASTARTES CHARACTER model from your army that has not already been selected to fight this phase is destroyed. Do not remove that model from play - it can fight after the attacking model’s unit has finished making attacks. After resolving the destroyed model’s attacks, it is then removed.
MASTER OF THE TRIFOLD PATH1CP
Raven Guard – Requisition Stratagem

The most accomplished leaders of the Raven Guard are masters of every strategic doctrine laid down by Corvus Corax.

Use this Stratagem after nominating a RAVEN GUARD CHARACTER model that is not a named character to be your Warlord. You can generate one additional Warlord Trait for them; this must be from the Raven Guard Warlord Traits table. All of the Warlord Traits your army includes must be different (if randomly generated, re-roll duplicate results). You can only use this Stratagem once per battle.
A TROPHY BESTOWED1CP
Space Wolves – Requisition Stratagem

There are few more meaningful tokens of brotherhood among the sons of Russ than the gifting of a war trophy - heavy with glory and steeped in tales of honour -from one warrior to another.

Use this Stratagem after nominating a model drawn from a Space Wolves successor Chapter to be your WARLORD. You can give one Relic of the Fang to a CHARACTER model from your army that is drawn from a Space Wolves successor Chapter instead of giving them a Special-issue Wargear Relic or a Chapter Relic from Codex: Space Marines. If you do, replace the Space Wolves keyword in all instances on that Relic (if any) with that model’s successor Chapter keyword. You can only use this Stratagem once.
HONOURED BY THE ROCK1CP
Dark Angels – Requisition Stratagem

The Dark Angels have been known to bestow their artefacts upon worthy successor Chapters.

Use this Stratagem after nominating a model drawn from a Dark Angels successor Chapter to be your WARLORD. You can give one Relic of Caliban to a CHARACTER model from your army that is drawn from a Dark Angels successor Chapter instead of giving them a Special-issue Wargear Relic. If you do, replace the DARK ANGELS keyword in all instances on that Relic (if any) with that model’s successor Chapter keyword. You can only use this Stratagem once.
INFILTRATORS1CP
Raven Guard – Strategic Ploy Stratagem

The Raven Guard are masters of infiltration, slipping unseen across the battlefield before striking from the shadows to annihilate their foes with gun and blade.

Use this Stratagem at the start of the first battle round, before the first turn begins. Select one RAVEN GUARD INFANTRY unit from your army that is on the battlefield. That unit can move as if it were your Movement phase. The unit must end that move more than 9" away from any enemy models. If both players have units that can do this, the player who is taking the first turn moves their units first. Each unit can only be selected for this Stratagem once per battle.
STRIKE FROM THE SHADOWS1CP
Raven Guard – Strategic Ploy Stratagem

The deadliest strike comes always from the least expected quarter. So taught Corax.

Use this Stratagem during the Declare Reserves and Transports step of your mission. Select one RAVEN GUARD INFANTRY unit from your army. You can set up that unit in ambush instead of setting it up on the battlefield. If you do, at the end of one of your Movement phases you can set up that unit anywhere on the battlefield that is more than 9" away from any enemy models.
A DEADLY PRIZE1CP
Raven Guard – Strategic Ploy Stratagem

If critical objectives look close to falling into enemy hands, the Raven Guard will often plant explosives to deny their capture.

Use this Stratagem at the end of your turn. Select one objective marker that is within 3" of any RAVEN GUARD INFANTRY units from your army and not within 3" of any enemy units. The next time an enemy unit ends a move within 3" of that objective marker, roll one D6; on a 2-4, that enemy unit suffers D3 mortal wounds; on a 5+ it suffers 3 mortal wounds. You cannot use this Stratagem on the same objective marker more than once per battle.
STRIKE FROM THE SKIES1CP
Raven Guard – Strategic Ploy Stratagem

The Raven Guard swoop into battle like dark-winged angels of vengeance.

Use this Stratagem at the start of your Charge phase. Select one RAVEN GUARD JUMP PACK unit. Until the end of that phase, that unit can be chosen to charge with even if it Advanced this turn, and when a charge roll is made for that unit, add 1 to the result.
HAMMER OF WRATH1CP
Adeptus Astartes – Strategic Ploy Stratagem

Space Marines with jump packs crash into combat with bonebreaking force.

Use this Stratagem in your Charge phase, when an ADEPTUS ASTARTES JUMP PACK unit from your army finishes a charge move. Select one enemy unit within Engagement Range of that JUMP PACK unit and roll one D6 for each model in that JUMP PACK unit that is within Engagement Range of that enemy unit. For each dice result that equals or exceeds that enemy unit’s Toughness characteristic, it suffers 1 mortal wound.
UNCOMPROMISING FIRE2CP
Adeptus Astartes – Strategic Ploy Stratagem

Switching weapons to full auto, the Space Marines unleash a short-lived but inescapable hail of fire.

Use this Stratagem in your Shooting phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is performing an action. That unit can shoot this phase without that action failing.
STEADY ADVANCE2CP
Adeptus Astartes – Strategic Ploy Stratagem

A measured advance allows Space Marines to unleash a steady stream of fire.

Use this Stratagem in your Movement phase, when an ADEPTUS ASTARTES INFANTRY unit from your army makes a Normal Move. Until the end of the turn, that unit is considered to have Remained Stationary.
AUSPEX SCAN2CP
Adeptus Astartes – Wargear Stratagem

Nearby motion and radiation signatures are detected by a handheld device, forewarning the bearer of ambushes.

Use this Stratagem at the end of the Reinforcements step of your opponent's Movement phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is not within Engagement Range of any enemy units. That unit can shoot as if it were your Shooting phase, but its models can only target a single eligible enemy unit that was set up as Reinforcements this turn and that is within 12" of their unit when doing so.

This datasheet has HQ Battlefield Role. Full list of Space Marines units sharing same Battlefield Role follows:

The KAYVAAN SHRIKE keyword is used in following Space Marines datasheets:

Bolt pistol used in following datasheets:

HQ
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.
A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.

When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.

  • Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
  • Cannot be shot alongside any other type of weapon.

Raven’s Talons used in following datasheets:

Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:

WOUND ROLL
ATTACK’S STRENGTH vs TARGET’S TOUGHNESSD6 ROLL REQUIRED
Is the Strength TWICE (or more) than the Toughness?2+
Is the Strength GREATER than the Toughness?3+
Is the Strength EQUAL to the Toughness?4+
Is the Strength LOWER than the Toughness?5+
Is the Strength HALF (or less) than the Toughness?6+

If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.

Frag grenades used in following datasheets:

Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.

Krak grenades used in following datasheets:

GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.
When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.

  • Only one model can use a Grenade when its unit shoots.
Angels of Death

Space Marines are amongst the finest warriors in the Imperium.

This unit has the following abilities, which are described below: And They Shall Know No Fear; Bolter Discipline; Shock Assault; Combat Doctrines.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.

The RAVEN GUARD and JUMP PACK keywords are used in following Space Marines datasheets:

Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Overwatch
Certain rules enable units to fire Overwatch at an enemy unit before it can charge. If an enemy unit declares a charge that targets one or more units from your army that have such a rule, each of those units can fire Overwatch before the charge roll is made. A unit cannot fire Overwatch if there are any enemy units within Engagement Range of it. Overwatch is resolved like a normal shooting attack (albeit one resolved in the Charge phase) and uses all the normal rules, except that an unmodified hit roll of 6 is always required for a successful hit roll, irrespective of the firing model’s Ballistic Skill or any hit roll modifiers. In addition, when a model fires Overwatch, it does so at the charging unit. Any rule that states the unit cannot be targeted unless it is the closest target (e.g. Look Out, Sir) does not apply when firing Overwatch.

  • Overwatch: Before charge roll made, all charge targets that can fire Overwatch can do so.
  • Can never fire Overwatch while enemy units are in Engagement Range.
  • When firing Overwatch, shoot with unit, but attacks only hit on unmodified 6s.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.

The KAYVAAN SHRIKE keyword is used in following Space Marines datasheets:

Characters
Some models have the CHARACTER keyword. These models can make Heroic Interventions in Charge Phase and are not easy targets in the Shooting Phase (see Look out, Sir, rule). If your Warlord has the CHARACTER keyword he may be able to have a Warlord Trait (see Warlord Trait section on model’s faction page).

Note that CHARACTERS cannot use their Aura Abilities while performing actions.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.

If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).

  • Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
  • No saving throws can be made against mortal wounds.
  • Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
Advance
When a unit makes an Advance, make an Advance roll for the unit by rolling one D6. Add the result in inches to the Move (M) characteristic of each model in that unit until the end of the current phase. Each model in that unit can then move a distance in inches equal to or less than this total, but no model can be moved within Engagement Range of enemy models. A unit cannot shoot or declare a charge in the same turn that it made an Advance.

  • Advance: Models move up to M+D6".
  • Cannot move within Engagement Range of enemy models.
  • Units that Advance cannot shoot or charge this turn.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.

  • Declare targets of the charge (must be within 12").
  • Charge roll = 2D6".
  • If insufficient to move charging unit into Engagement Range of all targets, charge fails.
  • If charge successful, models make their charge move.
  • Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Remain Stationary
If a unit Remains Stationary, none of its models can be moved for the rest of the phase. Any units from your army that were on the battlefield and were not selected to move in the Move Units step of the Movement phase are assumed to have Remained Stationary that phase.

  • Remain Stationary: Models cannot move this phase.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Army List
Datasheets collated
Faction Rules
© Vyacheslav Maltsev 2013-2021