Space Marines – Ivanus Enkomi
 ]
This datasheet does not meet the selection criteria (see Filter combo-box or Settings tab).
5

Ivanus Enkomi

NoNAME  M WS BS S T W A Ld Sv
100
Ivanus Enkomi
1
100
Ivanus Enkomi
6" 2+ 3+ 4 4 5 4 9 3+
Ivanus Enkomi is equipped with: Astartes grenade launcher; The Crozius Arkarnos; power fist. Your army can only include one IVANUS ENKOMI model.
WEAPON
RANGE
TYPE
S
AP
D
ABILITIES 
Astartes grenade launcher
Before selecting targets, select one of the profiles below to make attacks with.
Astartes grenade launcher
Before selecting targets, select one of the profiles below to make attacks with.
 - Frag grenade
 - Frag grenade
30"
Assault D6
3
0
1
Blast
Blast
 - Krak grenade
 - Krak grenade
30"
Assault 1
6
-1
D3
-
The Crozius Arkanos
The Crozius Arkanos
Melee
Melee
+2
-1
2
Each time an attack is made with this weapon, invulnerable saving throws cannot be taken against that attack.
Each time an attack is made with this weapon, invulnerable saving throws cannot be taken against that attack.
Power fist
Power fist
Melee
Melee
x2
-3
2
Each time an attack is made with this weapon, subtract 1 from that attack’s hit roll.
Each time an attack is made with this weapon, subtract 1 from that attack’s hit roll.
ABILITIES
ABILITIES
Angels of Death
Spiritual Leaders (Aura): While a friendly CORE unit is within 6" of this model, models in that unit can use this model’s Leadership characteristic instead of their own.
Rosarius: This model has a 4+ invulnerable save.
PRIEST
PRIEST
This model knows the Litany of Hate and one other litany from the Litanies of Battle. In your Command phase, if this model is on the battlefield, it can recite one litany it knows that has not already been recited by a friendly model this turn. Roll one D6: on a 3+, the recited litany is inspiring and takes effect until the start of your next Command phase.
WARLORD TRAIT!
WARLORD TRAIT!
Inspiring Leader (Aura): Add 1 to the Leadership characteristic of friendly units while they are within 6" of this WARLORD.
FACTION KEYWORDS: IMPERIUM, ADEPTUS ASTARTES, MINOTAURS
KEYWORDS: INFANTRY, CHARACTER, PRIEST, CHAPLAIN, IVANUS ENKOMI

Datasheet-related Stratagems

ONLY IN DEATH DOES DUTY END2CP
Adeptus Astartes – Epic Deed Stratagem

Imminent death does not prevent a Space Marine from enacting his final justice upon the enemies of the Imperium.

Use this Stratagem in the Fight phase, when an ADEPTUS ASTARTES CHARACTER model from your army that has not already been selected to fight this phase is destroyed. Do not remove that model from play - it can fight after the attacking model’s unit has finished making attacks. After resolving the destroyed model’s attacks, it is then removed.
COMMANDING ORATORY2CP
Adeptus Astartes – Epic Deed Stratagem

Fuelled by battlefield adrenaline, the Chaplain recites his litanies with even greater fervour, inspiring the warriors around him.

Use this Stratagem at the start of any of your phases other than your Command phase. Select one ADEPTUS ASTARTES CHAPLAIN unit from your army that has not recited a litany this turn. That model can recite one litany that has not already been recited by a friendly model this turn. That litany is automatically inspiring (do not roll) and takes effect until the start of your next Command phase.
UNCOMPROMISING FIRE2CP
Adeptus Astartes – Strategic Ploy Stratagem

Switching weapons to full auto, the Space Marines unleash a short-lived but inescapable hail of fire.

Use this Stratagem in your Shooting phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is performing an action. That unit can shoot this phase without that action failing.
STEADY ADVANCE2CP
Adeptus Astartes – Strategic Ploy Stratagem

A measured advance allows Space Marines to unleash a steady stream of fire.

Use this Stratagem in your Movement phase, when an ADEPTUS ASTARTES INFANTRY unit from your army makes a Normal Move. Until the end of the turn, that unit is considered to have Remained Stationary.
AUSPEX SCAN2CP
Adeptus Astartes – Wargear Stratagem

Nearby motion and radiation signatures are detected by a handheld device, forewarning the bearer of ambushes.

Use this Stratagem at the end of the Reinforcements step of your opponent's Movement phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is not within Engagement Range of any enemy units. That unit can shoot as if it were your Shooting phase, but its models can only target a single eligible enemy unit that was set up as Reinforcements this turn and that is within 12" of their unit when doing so.

This datasheet has HQ Battlefield Role. Full list of Space Marines units sharing same Battlefield Role follows:

The IVANUS ENKOMI keyword is used in following Space Marines datasheets:

Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:
  1. If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
  2. When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
Blast weapons can never be used to make attacks against a unit that is within Engagement Range of the firing model’s unit, even if the weapon has the Pistol type or if the firing model is a VEHICLE or a MONSTER – firing high-explosives at point-blank range is simply unwise.

  • Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
  • Can never be used to attack units within the firing unit’s Engagement Range.
ASSAULT
Assault weapons fire so rapidly or indiscriminately that they can be shot from the hip as warriors dash forwards into combat.
If a unit includes any models equipped with Assault weapons, that unit is still eligible to shoot with in your Shooting phase even if it has Advanced this turn, but you can only resolve attacks using those Assault weapons when you select that unit to shoot with. If a model shoots an Assault weapon in the same turn in which its unit has Advanced, subtract 1 from hit rolls when resolving that weapon’s attacks.

  • Can be shot even if firing model’s unit Advanced.
  • Subtract 1 from hit rolls if the firing model’s unit Advanced.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:

WEAPONRANGETYPESAPD
Close combat weaponMeleeMeleeUser01

If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.

If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).

  • Each close combat attack is made with a melee weapon.
  • A model makes attacks using the close combat weapon profile if it has no other melee weapons.
  • If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.

If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Angels of Death

Space Marines are amongst the finest warriors in the Imperium.

This unit has the following abilities, which are described below: And They Shall Know No Fear; Bolter Discipline; Shock Assault; Combat Doctrines.
Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.

  • Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
  • A model with an invulnerable save can use it instead of its normal Sv.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.

  • Normal Move: Models move up to M".
  • Cannot move within Engagement Range of any enemy models.
Remain Stationary
If a unit Remains Stationary, none of its models can be moved for the rest of the phase. Any units from your army that were on the battlefield and were not selected to move in the Move Units step of the Movement phase are assumed to have Remained Stationary that phase.

  • Remain Stationary: Models cannot move this phase.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.

  • Engagement Range: 1" horizontally + 5" vertically.
  • Models cannot be set up within Engagement Range of enemy models.
Army List
Datasheets collated
Faction Rules
© Vyacheslav Maltsev 2013-2021