Space Marines – Elam Courbray
| No | NAME | M | WS | BS | S | T | W | A | Ld | Sv | |
110 Elam Courbray |
|||||||||||
| 1 | 110 Elam Courbray |
12" | 2+ | 2+ | 4 | 4 | 5 | 4 | 9 | 3+ | |
Elam Courbray is equipped with: bolt pistol; Sword Excellus; frag grenades; krak grenades. Your army can only include one ELAM COURBRAY model.
WEAPON | RANGE | TYPE | S | AP | D | ABILITIES |
| Bolt pistol | ||||||
| Bolt pistol | 12" | Pistol 1 | 4 | 0 | 1 | - |
| Sword Excellus | ||||||
| Sword Excellus | Melee | Melee | +1 | -3 | 2 | Each time an attack is made with this weapon, you can re-roll the wound roll. |
| Each time an attack is made with this weapon, you can re-roll the wound roll. | ||||||
| Frag grenades | ||||||
| Frag grenades | 6" | Grenade D6 | 3 | 0 | 1 | Blast |
| Blast | ||||||
| Krak grenades | ||||||
| Krak grenades | 6" | Grenade 1 | 6 | -1 | D3 | - |
ABILITIES | |
ABILITIES |
Angels of Death, Death From Above Iron Halo: This model has a 4+ invulnerable save. Rites of Battle (Aura): While a friendly CORE unit is within 6" of this model, each time a model in that unit makes an attack, re-roll a hit roll of 1. Honour or Death: This model is eligible to perform a Heroic Intervention if it is within 6" horizontally and 5" vertically of any enemy unit, instead of 3" horizontally and 5" vertically. Each time this model makes a Heroic Intervention move, so long as it ends that move either closer to the closest enemy model or within Engagement Range of an enemy CHARACTER unit, it can move up to 6". All other rules for Heroic Interventions still apply. |
WARLORD TRAIT! | |
WARLORD TRAIT! |
Inspiring Leader (Aura): Add 1 to the Leadership characteristic of friendly units while they are within 6" of this WARLORD. |
| FACTION KEYWORDS: IMPERIUM, ADEPTUS ASTARTES, FIRE HAWKS | |
| KEYWORDS: INFANTRY, CHARACTER, FLY, JUMP PACK, CAPTAIN, ELAM COURBRAY | |
Datasheet-related Stratagems
ONLY IN DEATH DOES DUTY END2CP
Adeptus Astartes – Epic Deed Stratagem
Imminent death does not prevent a Space Marine from enacting his final justice upon the enemies of the Imperium.
Use this Stratagem in the Fight phase, when an ADEPTUS ASTARTES CHARACTER model from your army that has not already been selected to fight this phase is destroyed. Do not remove that model from play - it can fight after the attacking model’s unit has finished making attacks. After resolving the destroyed model’s attacks, it is then removed.
HAMMER OF WRATH1CP
Adeptus Astartes – Strategic Ploy Stratagem
Space Marines with jump packs crash into combat with bonebreaking force.
Use this Stratagem in your Charge phase, when an ADEPTUS ASTARTES JUMP PACK unit from your army finishes a charge move. Select one enemy unit within Engagement Range of that JUMP PACK unit and roll one D6 for each model in that JUMP PACK unit that is within Engagement Range of that enemy unit. For each dice result that equals or exceeds that enemy unit’s Toughness characteristic, it suffers 1 mortal wound.
UNCOMPROMISING FIRE2CP
Adeptus Astartes – Strategic Ploy Stratagem
Switching weapons to full auto, the Space Marines unleash a short-lived but inescapable hail of fire.
Use this Stratagem in your Shooting phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is performing an action. That unit can shoot this phase without that action failing.
STEADY ADVANCE2CP
Adeptus Astartes – Strategic Ploy Stratagem
A measured advance allows Space Marines to unleash a steady stream of fire.
Use this Stratagem in your Movement phase, when an ADEPTUS ASTARTES INFANTRY unit from your army makes a Normal Move. Until the end of the turn, that unit is considered to have Remained Stationary.
AUSPEX SCAN2CP
Adeptus Astartes – Wargear Stratagem
Nearby motion and radiation signatures are detected by a handheld device, forewarning the bearer of ambushes.
Use this Stratagem at the end of the Reinforcements step of your opponent's Movement phase. Select one ADEPTUS ASTARTES INFANTRY unit from your army that is not within Engagement Range of any enemy units. That unit can shoot as if it were your Shooting phase, but its models can only target a single eligible enemy unit that was set up as Reinforcements this turn and that is within 12" of their unit when doing so.
This datasheet has HQ Battlefield Role. Full list of Space Marines units sharing same Battlefield Role follows:
HQ
The ELAM COURBRAY keyword is used in following Space Marines datasheets:
Bolt pistol used in following datasheets:
Elites
Fast Attack
HQ
Heavy Support
PISTOL
Due to their compact size, pistols can even be used in melee to shoot at point-blank range.A model can make attacks with a Pistol even when its unit is within Engagement Range of enemy units, but it must target an enemy unit that is within Engagement Range of its own unit when it does so. In such circumstances, the model can target an enemy unit even if other friendly units are within Engagement Range of the same enemy unit.
When a model equipped with both a Pistol and another type of ranged weapon (e.g. a Pistol and a Rapid Fire weapon) shoots, it can either shoot with its Pistol(s) or with its other ranged weapons. Choose which it will fire (Pistols or non-Pistols) before selecting targets.
- Can be shot even if firing model’s unit is within Engagement Range of enemy unit.
- Cannot be shot alongside any other type of weapon.
Wound Roll
Each time an attack scores a hit against a target unit, make a wound roll for that attack by rolling one D6 to see if that attack successfully wounds the target. The result required is determined by comparing the attacking weapon’s Strength (S) characteristic with the target’s Toughness (T) characteristic, as shown on the following table:
| ||||||||||||||
If the result of the wound roll is less than the required number, the attack fails and the attack sequence ends. An unmodified wound roll of 6 always successfully wounds the target, and an unmodified wound roll of 1 always fails. A wound roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a wound roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Select Weapon
When a model makes a close combat attack, it must do so using a melee weapon (i.e. a weapon that has the ‘Melee’ type). The weapons a model is equipped with are described on its datasheet. If a model is not equipped with any melee weapons, or if it cannot make an attack with any of the melee weapons it is equipped with, then that model makes its attacks using a close combat weapon, which has the following profile:
|
If a model has more than one melee weapon, select which it will use before resolving any attacks. If a model has more than one melee weapon and can make several attacks, it can split them between these weapons however you wish – declare which attacks are being made with which weapons before any attacks are resolved. If the selected weapon has more than one profile that you must choose between, you must declare which profile is being used at the same time. Different attacks made with such a weapon can be made using different profiles if you wish.
If your unit is making attacks with more than one melee weapon against a unit, and those weapons have different characteristics profiles, then after you have resolved an attack with one of those weapons you must, if any other weapons with the same characteristics profile are also being used to make attacks against that unit, resolve those attacks before resolving any attacks against the target with a weapon that has a different characteristics profile. Note that all the attacks you have declared are always resolved against the target unit even if, when you come to resolve an individual attack, no models in the target unit remain in range (this can happen because of models being destroyed and removed from the battlefield as the result of resolving other attacks made by the attacking model’s unit first).
- Each close combat attack is made with a melee weapon.
- A model makes attacks using the close combat weapon profile if it has no other melee weapons.
- If a unit attacks with multiple weapons, all attacks made with weapons that have the same profile must be resolved before resolving attacks with the next.
Frag grenades used in following datasheets:
Elites
Troops
Fast Attack
HQ
and others...
Blast Weapons
Some weapons have ‘Blast’ listed in their profile’s abilities. These are referred to as Blast weapons. In addition to the normal rules, the following rules apply to Blast weapons:- If a Blast weapon targets a unit that has between 6 and 10 models, it always makes a minimum of 3 attacks. So if, when determining how many attacks are made with that weapon, the dice rolled results in less than 3 attacks being made, make 3 attacks instead. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 6 or more models, and you roll a 2 to determine how many attacks are made, that roll is counted as being a 3 and that weapon makes three attacks against that unit.
- When a Blast weapon targets a unit that has 11 or more models, do not roll dice to randomly determine how many attacks are made – instead, make the maximum possible number of attacks. For example, if a Grenade D6 weapon with the Blast rule targets a unit that has 11 or more models, that weapon makes six attacks against that unit.
- Blast Weapons: Minimum three attacks against units with 6+ models. Always make maximum number of attacks against units with 11+ models.
- Can never be used to attack units within the firing unit’s Engagement Range.
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.
- Only one model can use a Grenade when its unit shoots.
Krak grenades used in following datasheets:
Elites
Troops
Fast Attack
HQ
and others...
GRENADE
Grenades are handheld explosive devices that a warrior throws at the enemy while their squad mates provide covering fire.When a unit shoots, one model that is equipped with a Grenade in that unit can resolve attacks with it instead of shooting any other weapons.
- Only one model can use a Grenade when its unit shoots.
Angels of Death
Space Marines are amongst the finest warriors in the Imperium.
This unit has the following abilities, which are described below: And They Shall Know No Fear; Bolter Discipline; Shock Assault; Combat Doctrines.Death From Above
The Angels of Death launch their attack from all directions. Troops equipped with jump packs and grav-chutes descend from the heavens, guns blazing as they slam into battle.
During deployment, if every model in this unit has this ability, then you can set up this unit high in the skies instead of setting it up on the battlefield. If you do, then in the Reinforcements step of one of your Movement phases you can set up this unit anywhere on the battlefield that is more than 9" away from any enemy models.Saving Throw
The player commanding the target unit then makes one saving throw by rolling one D6 and modifying the roll by the Armour Penetration (AP) characteristic of the weapon that the attack was made with. For example, if the weapon has an AP of -1, then 1 is subtracted from the saving throw roll. If the result is equal to, or greater than, the Save (Sv) characteristic of the model the attack was allocated to, then the saving throw is successful and the attack sequence ends. If the result is less than the model’s Save characteristic, then the saving throw fails and the model suffers damage. An unmodified roll of 1 always fails.
Invulnerable Saves
Some models have an invulnerable save. Each time an attack is allocated to a model with an invulnerable save, you can choose to use either its normal Save (Sv) characteristic or its invulnerable save, but not both. If a model has more than one invulnerable save, it can only use one of them – choose which it will use. If you use a model’s invulnerable save, it is never modified by a weapon’s Armour Penetration value.- Invulnerable save: Saving throw that is never modified by attacking weapon’s AP.
- A model with an invulnerable save can use it instead of its normal Sv.
Hit Roll
When a model makes an attack, make one hit roll for that attack by rolling one D6. If the result of the hit roll is equal to or greater than the attacking model’s Ballistic Skill (BS) characteristic (if the attack is being made with a ranged weapon) or its Weapon Skill (WS) characteristic (if the attack is being made with a melee weapon), then that attack scores one hit against the target unit. If not, the attack fails and the attack sequence ends.If an attack is made with a weapon that has an ability that says it ‘automatically hits the target’, no hit roll is made – that attack simply scores one hit on the target unit. An unmodified hit roll of 6 always scores a hit, and an unmodified hit roll of 1 always fails. A hit roll can never be modified by more than -1 or +1. This means that if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be -2 or worse, it is changed to be -1. Similarly, if, after all the cumulative modifiers to a hit roll have been calculated, the total modifier would be +2 or better, it is changed to be +1.
Performing a Heroic Intervention
When a unit performs a Heroic Intervention, you can move each model in that unit up to 3" – this is a Heroic Intervention move. Each model in the unit must finish its Heroic Intervention move closer to the closest enemy model. Remember that a unit must finish any type of move in unit coherency.- Heroic Intervention: Move up to 3".
- Must end closer to the closest enemy model.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.- Engagement Range: 1" horizontally + 5" vertically.
- Models cannot be set up within Engagement Range of enemy models.
Characters
Some models have the CHARACTER keyword. These models can make Heroic Interventions in Charge Phase and are not easy targets in the Shooting Phase (see Look out, Sir, rule). If your Warlord has the CHARACTER keyword he may be able to have a Warlord Trait (see Warlord Trait section on model’s faction page).Note that CHARACTERS cannot use their Aura Abilities while performing actions.
The Warlord
While mustering your army, you can nominate one model (except a model with the FORTIFICATION keyword) to be your Warlord. That model gains the WARLORD keyword. If this model is a CHARACTER, you can also assign a Warlord Trait to it. Note, that more than one model in your army can have a Warlord Trait (e.g. by using Stratagems), but they are only considered your Warlord for the purpose of that trait.
The IMPERIUM keyword is used in following Space Marines datasheets:
HQ
and others...
The ADEPTUS ASTARTES keyword is used in following Space Marines datasheets:
HQ
and others...
The FIRE HAWKS keyword is used in following Space Marines datasheets:
HQ
Troops
Dedicated Transport
Elites
and others...
The INFANTRY keyword is used in following Space Marines datasheets:
HQ
and others...
The CHARACTER keyword is used in following Space Marines datasheets:
HQ
and others...
The FLY keyword is used in following Space Marines datasheets:
HQ
Dedicated Transport
Fast Attack
Flyers
The JUMP PACK keyword is used in following Space Marines datasheets:
HQ
The CAPTAIN keyword is used in following Space Marines datasheets:
HQ
The ADEPTUS ASTARTES and CHARACTER keywords are used in following Space Marines datasheets:
HQ
and others...
The ADEPTUS ASTARTES and JUMP PACK keywords are used in following Space Marines datasheets:
HQ
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.- Engagement Range: 1" horizontally + 5" vertically.
- Models cannot be set up within Engagement Range of enemy models.
Charging with a Unit
Once you have chosen an eligible unit to declare a charge with, you must select one or more enemy units within 12" of it as the targets of its charge. The target(s) of this charge do not need to be visible to the charging unit. You then make a charge roll for your unit by rolling 2D6. This is the maximum number of inches each model in the charging unit can now be moved if they can make the charge move. To make a charge move, the unit’s charge roll must be sufficient that it is able to end that move in unit coherency and within Engagement Range of every unit that was a target of its charge, without moving within Engagement Range of any enemy units that were not a target of its charge. If this is possible, then the charge is successful and the models in the unit make a charge move so as to fulfil the above conditions. If this is impossible, the charge fails and no models in the charging unit move this phase.- Declare targets of the charge (must be within 12").
- Charge roll = 2D6".
- If insufficient to move charging unit into Engagement Range of all targets, charge fails.
- If charge successful, models make their charge move.
- Cannot make a charge move within Engagement Range of any unit that was not the target of the charge.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.- Engagement Range: 1" horizontally + 5" vertically.
- Models cannot be set up within Engagement Range of enemy models.
Mortal Wounds
Some attacks inflict mortal wounds – these are so powerful that no armour or force field can withstand their fury. Each mortal wound inflicts 1 point of damage on the target unit, and they are always applied one at a time. Do not make a wound roll or saving throw (including invulnerable saves) against a mortal wound – just allocate it as you would any other attack and inflict damage to a model in the target unit. Unlike damage inflicted by normal attacks, excess damage from mortal wounds is not lost. Instead, keep allocating damage to another model in the target unit until either all the damage has been allocated or the target unit is destroyed.If an attack inflicts mortal wounds in addition to the normal damage, resolve the normal damage first. If an attack inflicts mortal wounds in addition to the normal damage, but the normal damage is subsequently saved, the target unit still suffers the mortal wounds, as described before. If an ability modifies the damage inflicted by a weapon, and that weapon can inflict mortal wounds in addition to the normal damage, the modifier does not apply to any mortal wounds that are inflicted (unless the rule specifically states otherwise).
- Each mortal wound inflicted on a unit causes one model in the unit to lose one wound.
- No saving throws can be made against mortal wounds.
- Mortal wounds inflicted by attacks in addition to normal damage always apply, even if normal damage saved.
The ADEPTUS ASTARTES and INFANTRY keywords are used in following Space Marines datasheets:
HQ
and others...
Normal Move
When a unit makes a Normal Move, each model in that unit can move a distance in inches equal to or less than the Move (M) characteristic shown on its datasheet, but no model can be moved within Engagement Range of enemy models.- Normal Move: Models move up to M".
- Cannot move within Engagement Range of any enemy models.
Remain Stationary
If a unit Remains Stationary, none of its models can be moved for the rest of the phase. Any units from your army that were on the battlefield and were not selected to move in the Move Units step of the Movement phase are assumed to have Remained Stationary that phase.- Remain Stationary: Models cannot move this phase.
Engagement Range
Engagement Range represents the zone of threat that models present to their enemies. While a model is within 1" horizontally and 5" vertically of an enemy model, those models are within Engagement Range of each other. While two enemy models are within Engagement Range of each other, those models’ units are also within Engagement Range of each other. Models cannot be set up within Engagement Range of enemy models.- Engagement Range: 1" horizontally + 5" vertically.
- Models cannot be set up within Engagement Range of enemy models.
Army List
Datasheets collatedHQ
Dedicated Transport
Elites
Fast Attack
Flyers
Heavy Support
Lords of War