Slaanesh – Glutos Orscollion, Lord of Gluttony
This warscroll does not meet the selection criteria (see Settings tab).
18
3+
9
WARSCROLL

Glutos Orscollion, Lord of Gluttony

Guided by the daemon Loth’shar, Glutos Orscollion is on a quest to sample the most exotic tastes in the Mortal Realms. Riding atop an opulent palanquin and surrounded by his devoted court, he can unmake whole armies through his loathsome magics.
MELEE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Wailing Greatblade
Wailing Greatblade1"33+3+-22
Flaying Scourge
Flaying Scourge1"23+4+-1
Sacrificial Dagger
Sacrificial Dagger1"14+3+-1
Crushing Claws
Crushing Claws1"3+3+-13
DAMAGE
Wounds SufferedCompanionsMoveCrushing Claws
0-4All8"6
5-8Painbringer Kyazu, Lashmaster Vhyssk6"5
9-12Painbringer Kyazu5"4
13+None4"3
PITCHED BATTLE PROFILE

Unit Size: 1      Points: 400
Battlefield Role: Leader
Notes: Unique

DESCRIPTION

Glutos Orscollion is a named character that is a single model.

COMPANIONS: Glutos is accompanied by Painbringer Kyazu, who attacks with a Wailing Greatblade; Lashmaster Vhyssk, who attacks with a Flaying Scourge; and Priestess Dolece, who attacks with a Sacrificial Dagger.

The companions that currently accompany Glutos vary depending on the number of wounds suffered by this model, as shown on the damage table. You can only use the companion abilities for the companions currently accompanying Glutos, and only those companions can attack. For all other rules purposes, companions are treated in the same manner as a mount.

MOUNT: This model’s Palanquin Bearers attack with their Crushing Claws.

ABILITIES

The Grand Gourmand: Glutos sees battle as a grand banquet in which his darkest appetites may be given free rein.
This model gains an ability each battle round, as shown below. Note that all of these abilities are cumulative.

Battle Round 1 – Aperitif: Add 1 to Bravery characteristic of friendly MORTAL HEDONITE units within 6" of this model.

Battle Round 2 – Starter: This model can run and still charge later in the same turn.

Battle Round 3 – Main Course: Do not take battleshock tests for friendly MORTAL HEDONITE units while they are wholly within 12" of this model.

Battle Round 4 – Dessert: At the end of your hero phase, you can replace the spell this model knows from the Lore of Pain and Pleasure table with a new spell from that table. In addition, this model can attempt to cast 1 extra spell in your hero phase.

Battle Round 5 – Digestif: You can re-roll casting, dispelling and unbinding rolls for this model.

Fog of Temptation: Those who inhale the scented mist emanating from Glutos’ palanquin are wracked with agonising hunger-spasms.
Subtract 1 from hit rolls for attacks made by enemy units within 12" of this model.

The Leerstave of Loth’shar: Loth’shar constantly drives Glutos on in pursuit of nearby delicacies, and rewards him for each unholy act of consumption.
Add 1 to casting, dispelling and unbinding rolls for this model.

MAGIC

This model is a WIZARD. It can attempt to cast 2 spells in your hero phase and attempt to unbind 2 spells in the enemy hero phase. It knows the Arcane Bolt, Mystic Shield and Crippling Famishment spells.

Crippling Famishment: With a snap of his fingers, Glutos shares his endless hunger with those he finds appetising, paralysing his prey with a violent surge of immeasurable hunger.
Crippling Famishment has a casting value of 7. If successfully cast, pick 1 enemy unit within 18" of the caster that is visible to them. Until your next hero phase, halve the Move characteristic of that unit, halve run rolls for that unit, and halve charge rolls for that unit.

COMMAND ABILITIES

Gorge on Excess: The followers of the Gluttonous Host grow strong on acts of excess, be it gulping down raw flesh or engaging in some other depraved perversion in the heat of battle.
You can use this command ability once per turn in your hero phase. If you do so, pick 1 friendly HEDONITE unit wholly within 12" of this model. Until your next hero phase, if an enemy unit is destroyed by an attack made by that HEDONITE unit and there are wounds that remain to be allocated to that enemy unit from that attack, heal up to the same number of wounds allocated to that HEDONITE unit.

COMPANION ABILITIES

Painbringer Kyazu: Kyazu is a formidable warrior that will stop at nothing to protect his liege.
If the unmodified wound roll for an attack made with this model’s Wailing Greatblade is 6, that attack inflicts 2 mortal wounds on the target and the attack sequence ends (do not make a save roll).

Lashmaster Vhyssk: Vhyssk spurs the palanquin bearers to achieve destructive speed.
You can re-roll charge rolls for this model.

Priestess Dolece: Dolece calls upon Slaanesh to bless the Grand Gourmand.
In your hero phase, you can say that Dolece will call to Slaanesh to protect her master. If you do so, roll a dice. On a 1, nothing happens. On a 2+, until your next hero phase, you can roll a dice each time you allocate a wound or mortal wound to this model. On a 5+, that wound or mortal wound is negated.

KEYWORDS
CHAOS, MORTAL, SLAANESH, HEDONITE, HERO, WIZARD, GLUTOS ORSCOLLION
Named Characters
Named characters such as Nagash, Archaon and Alarielle are singular and mighty warriors, with their own personalities and artefacts of power. As such, these models cannot have a command trait or artefact of power.
Mounts
Sometimes the description for a model will include information about the model having a mount, such as a battle steed, a powerful monster that they can ride, or a massive war machine that they can stand upon. Note that when the model is slain both the rider and their mount are removed.
Running
When you pick a unit to make a normal move, you can declare that it will run. Make a run roll for the unit by rolling a dice. Add the result of the run roll to the Move characteristic of all models in the unit for that movement phase. The unit can then move up to that distance in inches. Models in a unit that runs can’t shoot or charge later in the same turn.
Charge roll, charge move
Any of your units within 12" of the enemy in your charge phase can attempt to make a charge move. Pick an eligible unit and make a charge roll for it by rolling 2D6. Each model in the unit can move a number of inches equal to the charge roll. You cannot make a charge move with a unit that has run or retreated earlier in the turn, or with a unit that is within 3" of an enemy unit.

The first model you move from a unit making a charge move must finish the move within ½" of an enemy model (you do not have to pick the target for the charge before making the charge roll). If that’s impossible, or you decide not to make the charge move, the charge fails and no models in the unit can move in this phase.

Once all models in one unit have made their charge moves, you can pick another eligible unit to make a charge attempt, until all units that you want to make charge attempts have done so.
Battleshock test, battleshock roll
In the battleshock phase, both players must take battleshock tests for units from their army that have had models slain during the turn. The player whose turn it is tests first.

You must make a battleshock roll for each unit that has to take a battleshock test. To make a battleshock roll, roll a dice. Add the number of models from the unit that have been slain this turn to the dice roll, and add 1 to the unit’s Bravery characteristic for every 10 models that are in the unit when the test is taken.

If the modified battleshock roll is greater than the unit’s modified Bravery characteristic, the battleshock test has been failed. If the test is failed, for each point by which the modified roll exceeds the unit’s modified Bravery characteristic, one model in that unit must flee. You decide which of the models from your units flee – remove them from play and count them as having been slain.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Unbinding and Dispelling
A WIZARD can attempt to unbind an endless spell when it is initially cast as normal. In addition, a WIZARD can attempt to dispel one endless spell at the start of each of their hero phases. If a wizard attempts to dispel an endless spell, they can attempt to cast one less spell than normal that phase.

In order to dispel an endless spell, first pick an endless spell model within 30" of the wizard and visible to them, and then roll 2D6. If the roll is greater than the casting value of the spell, the endless spell is dispelled. An endless spell model cannot be subjected to more than one dispel attempt per hero phase.

When an endless spell is dispelled its model is removed from play; the model can then be used again if the same endless spell is successfully cast later in the battle.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Arcane Bolt
Arcane Bolt has a casting value of 5. If successfully cast, pick an enemy unit within 18" of the caster that is visible to them. That unit suffers 1 mortal wound. If the casting roll was 10 or more, the unit suffers D3 mortal wounds instead.
Mystic Shield
Mystic Shield has a casting value of 6. If successfully cast, pick a friendly unit within 18" of the caster that is visible to them. Re-roll save rolls of 1 for that unit until your next hero phase.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Running
When you pick a unit to make a normal move, you can declare that it will run. Make a run roll for the unit by rolling a dice. Add the result of the run roll to the Move characteristic of all models in the unit for that movement phase. The unit can then move up to that distance in inches. Models in a unit that runs can’t shoot or charge later in the same turn.
Command Abilities
If you have any HEROES in your army, you can use command abilities. Some command abilities are available to all armies, like the three on the right, while others are specific to certain models and appear on their warscroll. Some of these command abilities can only be used if that model is your general; when this is the case, it will be noted in the rules for the command ability.

In order to use any command ability you must spend 1 command point. You start the battle with 1 command point for each warscroll battalion you have in your army. In addition, you receive 1 command point at the start of each of your hero phases. You can use the same command ability several times in the same phase as long as you have enough command points to do so. Any command points you do not use can be used in a future turn. A command ability will usually specify when it is used; if it does not, it is used in your hero phase.
Healing Wounds
Some abilities allow wounds that have been allocated to a model to be healed. For each wound that is healed, remove one of the wounds that have been allocated to the model. You can’t heal wounds on a model that has been slain.
Allocating Wounds
Once all of a unit’s attacks have been resolved, add up the damage that was inflicted. The player commanding the target unit must then allocate a number of wounds to the target unit equal to the damage that was inflicted.

Wounds are allocated one at a time to models in the target unit. You can allocate the wounds inflicted on your units as you see fit (the models do not have to be within range or visible to the attacking unit). However, if you allocate a wound to a model, you must keep on allocating wounds to that model until it is slain – a unit can never have more than one wounded model.

Some abilities allow you to make a roll to negate a wound or mortal wound allocated to a model; in this case the roll is made for each individual wound or mortal wound as it is allocated to the model in question. If the wound or mortal wound is negated it has no effect on the model.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
© Vyacheslav Maltsev 2013-2021