Skaventide – Verminlord Warpseer
12
4+
10
WARSCROLL
Verminlord Warpseer
A Verminlord Warpseer is a twisted master of the arcane arts, a rat daemon possessed of sorcerous knowledge fit to drive mortal minds to madness, and the power to unleash screaming maelstroms torn directly from the Realm of Chaos.
| MISSILE WEAPONS | Range | Attacks | To Hit | To WoundTo Wnd | Rend | DamageDmg | |
| Prehensile Tails | |||||||
| Prehensile Tails | 6" | | 3+ | 3+ | -1 | 1 | |
| MELEE WEAPONS | Range | Attacks | To Hit | To WoundTo Wnd | Rend | DamageDmg | |
| Doom Glaive | |||||||
| Doom Glaive | 3" | 6 | 3+ | | -1 | D3 | |
DAMAGE
| Wounds Suffered | Move | Prehensile Tails | Doom Glaive |
| 0-2 | 12" | 4 | 2+ |
| 3-4 | 10" | 3 | 2+ |
| 5-7 | 8" | 2 | 3+ |
| 8-9 | 6" | 1 | 3+ |
| 10+ | 4" | 0 | 4+ |
DESCRIPTION
A Verminlord Warpseer is a single model armed with a Doom Glaive and Prehensile Tails.
ABILITIES
The Great Manipulators: A Warpseer’s mind boils with plans and intrigues, labyrinthine schemes overlaying and entangling one another into deranged infinity.
If this model is on the battlefield at the start of your hero phase, roll a dice. On a 3+, you receive 1 extra command point. On a 6 you receive D3 extra command points instead of 1.
If this model is on the battlefield at the start of your hero phase, roll a dice. On a 3+, you receive 1 extra command point. On a 6 you receive D3 extra command points instead of 1.
Protection of the Horned Rat: An eerie sense of watchfulness surrounds this being, and an unholy aura of warding protects them from harm.
Roll a dice each time you allocate a wound or mortal wound to this model. On a 5+ that wound or mortal wound is negated.
Roll a dice each time you allocate a wound or mortal wound to this model. On a 5+ that wound or mortal wound is negated.
Scry-orb: Conjured out of nothingness, these swirling orbs can show the Warpseer glimpses of the future, or be hurled into the enemy’s midst to explode in shattering clouds of madness.
You can re-roll save rolls for attacks that target this model. In addition, once per battle, in your shooting phase, you can pick 1 enemy unit within 13" of this model and visible to them. That unit suffers D6 mortal wounds, but you cannot use this ability to re-roll save rolls for this model for the rest of the battle.
You can re-roll save rolls for attacks that target this model. In addition, once per battle, in your shooting phase, you can pick 1 enemy unit within 13" of this model and visible to them. That unit suffers D6 mortal wounds, but you cannot use this ability to re-roll save rolls for this model for the rest of the battle.
Terrifying: This horrific monstrosity strikes fear deep into the hearts of its enemies.
Subtract 1 from the Bravery characteristic of enemy units while they are within 3" of any models with this ability.
Subtract 1 from the Bravery characteristic of enemy units while they are within 3" of any models with this ability.
MAGIC
This model is a WIZARD. It can attempt to cast two spells in your hero phase, and attempt to unbind two spells in the enemy hero phase. It knows the Arcane Bolt, Mystic Shield and Dreaded Warpgale spells.
Dreaded Warpgale: Screeching dark words in an unholy tongue, the Warpseer parts the veil of reality and draws a ravening gale of unnatural energies forth. The skies darken, clouds of glowing madness spill across the heavens, and bolts of warp lightning lash down to blast the rat daemon’s enemies into oblivion.
Dreaded Warpgale has a casting value of 8. If successfully cast, pick 1 enemy unit within 26" of the caster and visible to them. That unit suffers D6 mortal wounds, and run and charge rolls for that unit are halved until your next hero phase. If that unit can fly, it cannot fly until your next hero phase (in addition to having its run and charge rolls halved).
Dreaded Warpgale has a casting value of 8. If successfully cast, pick 1 enemy unit within 26" of the caster and visible to them. That unit suffers D6 mortal wounds, and run and charge rolls for that unit are halved until your next hero phase. If that unit can fly, it cannot fly until your next hero phase (in addition to having its run and charge rolls halved).
COMMAND ABILITIES
Forth-forth, Children of the Horned Rat!: Verminlord Warpseers are arch-schemers who take command of skaven swarms to further their labyrinthine plots.
You can use this command ability at the start of the battleshock phase. If you do so, pick 1 friendly model with this command ability. Do not take battleshock tests for friendly SKAVEN units while they are wholly within 26" of that model in that phase.
You can use this command ability at the start of the battleshock phase. If you do so, pick 1 friendly model with this command ability. Do not take battleshock tests for friendly SKAVEN units while they are wholly within 26" of that model in that phase.
KEYWORDS | CHAOS, DAEMON, VERMINLORD, SKAVENTIDE, MASTERCLAN, MONSTER, HERO, WIZARD, VERMINLORD WARPSEER |
Command Abilities
If you have any HEROES in your army, you can use command abilities. Some command abilities are available to all armies, like the three on the right, while others are specific to certain models and appear on their warscroll. Some of these command abilities can only be used if that model is your general; when this is the case, it will be noted in the rules for the command ability.In order to use any command ability you must spend 1 command point. You start the battle with 1 command point for each warscroll battalion you have in your army. In addition, you receive 1 command point at the start of each of your hero phases. You can use the same command ability several times in the same phase as long as you have enough command points to do so. Any command points you do not use can be used in a future turn. A command ability will usually specify when it is used; if it does not, it is used in your hero phase.
Allocating Wounds
Once all of a unit’s attacks have been resolved, add up the damage that was inflicted. The player commanding the target unit must then allocate a number of wounds to the target unit equal to the damage that was inflicted.Wounds are allocated one at a time to models in the target unit. You can allocate the wounds inflicted on your units as you see fit (the models do not have to be within range or visible to the attacking unit). However, if you allocate a wound to a model, you must keep on allocating wounds to that model until it is slain – a unit can never have more than one wounded model.
Some abilities allow you to make a roll to negate a wound or mortal wound allocated to a model; in this case the roll is made for each individual wound or mortal wound as it is allocated to the model in question. If the wound or mortal wound is negated it has no effect on the model.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).
| |||||||||||
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.
If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Arcane Bolt
Arcane Bolt has a casting value of 5. If successfully cast, pick an enemy unit within 18" of the caster that is visible to them. That unit suffers 1 mortal wound. If the casting roll was 10 or more, the unit suffers D3 mortal wounds instead.
Mystic Shield
Mystic Shield has a casting value of 6. If successfully cast, pick a friendly unit within 18" of the caster that is visible to them. Re-roll save rolls of 1 for that unit until your next hero phase.
Running
When you pick a unit to make a normal move, you can declare that it will run. Make a run roll for the unit by rolling a dice. Add the result of the run roll to the Move characteristic of all models in the unit for that movement phase. The unit can then move up to that distance in inches. Models in a unit that runs can’t shoot or charge later in the same turn.
Charge roll, charge move
Any of your units within 12" of the enemy in your charge phase can attempt to make a charge move. Pick an eligible unit and make a charge roll for it by rolling 2D6. Each model in the unit can move a number of inches equal to the charge roll. You cannot make a charge move with a unit that has run or retreated earlier in the turn, or with a unit that is within 3" of an enemy unit.The first model you move from a unit making a charge move must finish the move within ½" of an enemy model (you do not have to pick the target for the charge before making the charge roll). If that’s impossible, or you decide not to make the charge move, the charge fails and no models in the unit can move in this phase.
Once all models in one unit have made their charge moves, you can pick another eligible unit to make a charge attempt, until all units that you want to make charge attempts have done so.
Flying
If the warscroll for a model says that the model can fly, it can pass across models and terrain features as if they were not there when it makes any type of move. Any vertical distance up and/or down is ignored when measuring a flying model’s move. It cannot finish the move on top of another model.
Battleshock test, battleshock roll
In the battleshock phase, both players must take battleshock tests for units from their army that have had models slain during the turn. The player whose turn it is tests first.You must make a battleshock roll for each unit that has to take a battleshock test. To make a battleshock roll, roll a dice. Add the number of models from the unit that have been slain this turn to the dice roll, and add 1 to the unit’s Bravery characteristic for every 10 models that are in the unit when the test is taken.
If the modified battleshock roll is greater than the unit’s modified Bravery characteristic, the battleshock test has been failed. If the test is failed, for each point by which the modified roll exceeds the unit’s modified Bravery characteristic, one model in that unit must flee. You decide which of the models from your units flee – remove them from play and count them as having been slain.
The SKAVEN keyword is used in following Skaventide warscrolls:
The CHAOS keyword is used in following Skaventide warscrolls:
The DAEMON keyword is used in following Skaventide warscrolls:
Leader, Behemoth
Behemoth
The VERMINLORD keyword is used in following Skaventide warscrolls:
Leader, Behemoth
Behemoth
The SKAVENTIDE keyword is used in following Skaventide warscrolls:
The MASTERCLAN keyword is used in following Skaventide warscrolls:
Leader
Leader, Behemoth
Behemoth
The MONSTER keyword is used in following Skaventide warscrolls:
Leader, Behemoth
The HERO keyword is used in following Skaventide warscrolls:
The WIZARD keyword is used in following Skaventide warscrolls:
Leader, Behemoth
Behemoth
Army List
Warscrolls collatedFaction Rules
• Allies