Ossiarch Bonereapers – Katakros, Mortarch of the Necropolis
This warscroll does not meet the selection criteria (see Settings tab).
4"
20
3+
10
WARSCROLL

Katakros, Mortarch of the Necropolis

Orpheon Katakros is an immortal demigod of war. A military genius, he is a consummate commander; in conjunction with his trusted retainers, he bolsters the Ossiarch legions with iron resolve, surging physical power and uncanny insight.
MELEE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Inda-Khaat
Inda-Khaat1"3+3+-33
The Shield Immortis
The Shield Immortis1"3+3+-22
Nadirite Dagger
Nadirite Dagger1"13+3+-11
Nadirite Duelling Blades
Nadirite Duelling Blades1"63+3+-11
Soulreaver Greatblade
Soulreaver Greatblade1"33+3+-11
Spirit Dagger
Spirit Dagger1"33+3+-11
DAMAGE
Wounds SufferedCompanionsInda-KhaatThe Shield Immortis
0-1All1Cannot be used
2-3Prime Necrophoros, Aviarch Spymaster, Liege-Immort1Cannot be used
4-7Aviarch Spymaster, Liege-Immortis2Cannot be used
8-12Liege-Immortis2Cannot be used
13+None44
PITCHED BATTLE PROFILE

Unit Size: 1      Points: 500
Battlefield Role: Leader
Notes: Unique

DESCRIPTION

Katakros is a named character that is a single model. He is armed with Inda-Khaat and the Shield Immortis.

COMPANIONS: Katakros is accompanied by a Gnosis Scrollbearer that attacks with a Nadirite Dagger, a Prime Necrophoros that attacks with a Soulreaver Greatblade, an Aviarch Spymaster that attacks with a Spirit Dagger, and a Liege-Immortis that attacks with Nadirite Duelling Blades.

The companions that currently accompany Katakros vary depending on the number of wounds suffered by this model, as shown on the damage table. You can only use the companion abilities on the right for the companions currently accompanying Katakros, and only those companions can attack. For all other rules purposes, companions are treated in the same manner as a mount.

ABILITIES

Deadly Combination: Katakros can send a foe staggering with a blow from the Shield Immortis and exploit the opening with a follow-up strike from his glaive, Inda-Khaat.
If the unmodified hit roll for an attack made with the Shield Immortis is 6, that attack inflicts 2 mortal wounds on the target in addition to any normal damage.

Mortarch of the Necropolis: Katakros is the most perfect of Nagash’s constructs and ruler of the Ossiarch Empire.
At the start of your hero phase, if this model is on the battlefield you can pick up to 3 different friendly OSSIARCH BONEREAPERS units wholly within 24" of this model. For each of those units, you can either heal up to 3 wounds allocated to that unit or, if no wounds are allocated to it, you can return a number of slain models to that unit with a combined Wounds characteristic of 3 or less.

Nadirite Weapons: Nadirite weapons can steal an opponent’s life-force.
If the unmodified hit roll for an attack made with a Nadirite weapon is 6, that attack scores 2 hits on the target instead of 1. Make a wound and save roll for each hit.

COMMAND ABILITIES

Endless Duty: The service an Ossiarch Boneaper owes their liege never, ever ends; if so ordered, they will continue striking at the foe with relentless regularity until no one is left to oppose them.
You can use this command ability in your shooting phase or any combat phase. If you do so, pick 1 friendly OSSIARCH BONEREAPERS unit that is wholly within 12" of a model with this command ability. Add 1 to the Attacks characteristic of weapons used by that unit in that phase. You cannot pick the same unit to benefit from this command ability more than once per phase.

Supreme Lord of the Bonereaper Legions: An Ossiarch force personally led by Katakros is said to be worth ten times the number of an identical force led by his generals.
You can use this command ability in your hero phase if KATAKROS is your general. If you do so, until your next hero phase, add 1 to hit rolls for attacks made by friendly OSSIARCH BONEREAPERS units while they are wholly within 18" of this model, and add 1 to save rolls for attacks that target friendly MORTIS PRAETORIAN units while they are wholly within 18" of this model. You can only use this command ability once per hero phase.

Aviarch Spymaster: The Aviarch Spymaster can use their spy network to disrupt the plans of Katakros’ enemies.
Once per turn you can roll a dice when your opponent receives a command point. If you do so, on a 4+ that command point is lost.

COMPANION ABILITIES

Gnosis Scrollbearer: The Gnosis Scrollbearer that accompanies Katakros transcribes his edicts onto binding contracts that cannot be refused.
At the start of your hero phase, you can pick 1 enemy unit that is on the battlefield. Until your next hero phase, subtract 1 from hit rolls for attacks made by that unit that target friendly OSSIARCH BONEREAPERS units.

Prime Necrophoros: This Necrophoros holds aloft Katakros’ personal battle banner.
When you use this model’s Supreme Lord of the Bonereaper Legions command ability, it affects friendly OSSIARCH BONEREAPERS units while they are wholly within 36" of this model instead of wholly within 18" of this model.

KEYWORDS
DEATH, DEATHLORDS, OSSIARCH BONEREAPERS, MORTIS PRAETORIANS, LIEGE, HERO, KATAKROS
Named Characters
Named characters such as Nagash, Archaon and Alarielle are singular and mighty warriors, with their own personalities and artefacts of power. As such, these models cannot have a command trait or artefact of power.
Mounts
Sometimes the description for a model will include information about the model having a mount, such as a battle steed, a powerful monster that they can ride, or a massive war machine that they can stand upon. Note that when the model is slain both the rider and their mount are removed.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.

The OSSIARCH BONEREAPERS keyword is used in following Ossiarch Bonereapers warscrolls:

Healing Wounds
Some abilities allow wounds that have been allocated to a model to be healed. For each wound that is healed, remove one of the wounds that have been allocated to the model. You can’t heal wounds on a model that has been slain.
Slain Models
Once the number of wounds allocated to a model during the battle equals its Wounds characteristic, the model is slain. Place a slain model to one side – it is removed from play.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Command Abilities
If you have any HEROES in your army, you can use command abilities. Some command abilities are available to all armies, like the three on the right, while others are specific to certain models and appear on their warscroll. Some of these command abilities can only be used if that model is your general; when this is the case, it will be noted in the rules for the command ability.

In order to use any command ability you must spend 1 command point. You start the battle with 1 command point for each warscroll battalion you have in your army. In addition, you receive 1 command point at the start of each of your hero phases. You can use the same command ability several times in the same phase as long as you have enough command points to do so. Any command points you do not use can be used in a future turn. A command ability will usually specify when it is used; if it does not, it is used in your hero phase.

The KATAKROS keyword is used in following Ossiarch Bonereapers warscrolls:

Leader
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.

The DEATHLORDS keyword is used in following Ossiarch Bonereapers warscrolls:

None
Leader
Leader, Behemoth

The OSSIARCH BONEREAPERS keyword is used in following Ossiarch Bonereapers warscrolls:

The LIEGE keyword is used in following Ossiarch Bonereapers warscrolls:

Leader
© Vyacheslav Maltsev 2013-2021