Flesh-eater Courts – Abhorrant Ghoul King on Royal Terrorgheist
This warscroll does not meet the selection criteria (see Settings tab).
14
4+
10
WARSCROLL

Abhorrant Ghoul King on Royal Terrorgheist

A spine-chilling shadow against the sky, the Abhorrant Ghoul King and his Terrorgheist embody the eternal darkness of undeath. From the gaping maw of the massive bat-beast, a shrill scream cuts across the battlefield, turning blood to ice.
MISSILE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Death Shriek
Death Shriek10"1
See below
MELEE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Gory Talons and Fangs
Gory Talons and Fangs1"53+3+-11
Skeletal Claws
Skeletal Claws2"4+3+-1D3
Fanged Maw
Fanged Maw3"34+3+-2D6
DAMAGE
Wounds SufferedMoveDeath ShriekSkeletal Claws
0-314"64
4-612"54
7-910"43
10-128"33
13+6"22
PITCHED BATTLE PROFILE

Unit Size: 1      Points: 420
Battlefield Role: Leader, Behemoth

DESCRIPTION

An Abhorrant Ghoul King on Royal Terrorgheist is a single model armed with Gory Talons and Fangs.

MOUNT: This model’s Royal Terrorgheist attacks with its Death Shriek, Skeletal Claws and Fanged Maw.

FLY: This model can fly.

ABILITIES

Death Shriek: The terrifying shriek of a Terrorgheist is enough to stop a warrior’s heart.
Do not use the attack sequence for an attack made with this model’s Death Shriek. Instead roll a dice and add the Death Shriek value shown on this model’s damage table. If the total is higher than the target unit’s Bravery characteristic, the target unit suffers a number of mortal wounds equal to the difference between its Bravery characteristic and the total.

Gaping Maw: This horrific creature bites a great chunk out of its prey, or even swallows it whole.
If the unmodified hit roll for an attack made with this model’s Fanged Maw is 6, that attack inflicts 6 mortal wounds on the target unit and the attack sequence ends (do not make a wound or save roll).

Infested: When a Terrorgheist is finally destroyed, it explodes into a swarm of bats that feast on those nearby.
If this model is slain, before this model is removed from play each unit within 3" of this model suffers D3 mortal wounds.

Royal Blood: The vampiric blood that courses through a Ghoul King’s veins can heal even the most terrible wounds.
In your hero phase, you can heal up to D3 wounds allocated to this model.

MAGIC

This model is a WIZARD. It can attempt to cast one spell in your hero phase, and attempt to unbind one spell in the enemy hero phase. It knows the Arcane Bolt, Mystic Shield and Unholy Vitality spells.

Unholy Vitality: The Abhorrant Ghoul King infuses the crooked bodies of his minions with dark magic, making it nigh impossible for their enemies to stop their ravenous onslaught.
Unholy Vitality has a casting value of 6. If successfully cast, pick 1 friendly FLESH-EATER COURTS unit wholly within 24" of the caster and visible to them. Until your next hero phase, roll a dice each time you allocate a wound or mortal wound to that unit. On a 5+ that wound or mortal wound is negated.

COMMAND ABILITIES

Summon Royal Guard: With a snarled command, the Ghoul King calls forth his most elite retainers.
You can use this command ability at the end of your movement phase. If you do so, pick 1 friendly model that has this command ability and has not used it before in the battle. That model summons 1 unit of up to 3 KNIGHTS to the battlefield. The summoned unit is added to your army, and must be set up wholly within 6" of the edge of the battlefield and more than 9" from any enemy units.

KEYWORDS
DEATH, VAMPIRE, FLESH-EATER COURTS, ABHORRANT, MONSTER, HERO, WIZARD, ABHORRANT GHOUL KING
Flying
If the warscroll for a model says that the model can fly, it can pass across models and terrain features as if they were not there when it makes any type of move. Any vertical distance up and/or down is ignored when measuring a flying model’s move. It cannot finish the move on top of another model.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Healing Wounds
Some abilities allow wounds that have been allocated to a model to be healed. For each wound that is healed, remove one of the wounds that have been allocated to the model. You can’t heal wounds on a model that has been slain.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Arcane Bolt
Arcane Bolt has a casting value of 5. If successfully cast, pick an enemy unit within 18" of the caster that is visible to them. That unit suffers 1 mortal wound. If the casting roll was 10 or more, the unit suffers D3 mortal wounds instead.
Mystic Shield
Mystic Shield has a casting value of 6. If successfully cast, pick a friendly unit within 18" of the caster that is visible to them. Re-roll save rolls of 1 for that unit until your next hero phase.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Allocating Wounds
Once all of a unit’s attacks have been resolved, add up the damage that was inflicted. The player commanding the target unit must then allocate a number of wounds to the target unit equal to the damage that was inflicted.

Wounds are allocated one at a time to models in the target unit. You can allocate the wounds inflicted on your units as you see fit (the models do not have to be within range or visible to the attacking unit). However, if you allocate a wound to a model, you must keep on allocating wounds to that model until it is slain – a unit can never have more than one wounded model.

Some abilities allow you to make a roll to negate a wound or mortal wound allocated to a model; in this case the roll is made for each individual wound or mortal wound as it is allocated to the model in question. If the wound or mortal wound is negated it has no effect on the model.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Command Abilities
If you have any HEROES in your army, you can use command abilities. Some command abilities are available to all armies, like the three on the right, while others are specific to certain models and appear on their warscroll. Some of these command abilities can only be used if that model is your general; when this is the case, it will be noted in the rules for the command ability.

In order to use any command ability you must spend 1 command point. You start the battle with 1 command point for each warscroll battalion you have in your army. In addition, you receive 1 command point at the start of each of your hero phases. You can use the same command ability several times in the same phase as long as you have enough command points to do so. Any command points you do not use can be used in a future turn. A command ability will usually specify when it is used; if it does not, it is used in your hero phase.

The KNIGHTS keyword is used in following Flesh-eater Courts warscrolls:

None

The VAMPIRE keyword is used in following Flesh-eater Courts warscrolls:

Leader
Leader, Behemoth

The ABHORRANT keyword is used in following Flesh-eater Courts warscrolls:

Leader
Leader, Behemoth

The MONSTER keyword is used in following Flesh-eater Courts warscrolls:

Leader, Behemoth
Behemoth

The WIZARD keyword is used in following Flesh-eater Courts warscrolls:

Leader
Leader, Behemoth

The ABHORRANT GHOUL KING keyword is used in following Flesh-eater Courts warscrolls:

Leader
Leader, Behemoth
© Vyacheslav Maltsev 2013-2021