Cities of Sigmar – Freeguild General
 ]
This warscroll does not meet the selection criteria (see Filter combo-box or Settings tab).
5"
5
4+
7
WARSCROLL

Freeguild General

Freeguild Generals inspire their soldiers to acts of astonishing bravery with their mere presence. Master duellists and peerless strategists, they are as comfortable crossing blades with the foe as they are issuing decisive commands that lead to glorious victory.
MELEE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Zweihander
Zweihander1"33+3+-2D3
PITCHED BATTLE PROFILE

Unit Size: 1      Points: 100
Battlefield Role: Leader

DESCRIPTION

A Freeguild General is a single model armed with a Zweihander.

ABILITIES

Decapitating Swing: A single strike from a Zweihander can take the head clean off the shoulders.
If the unmodified hit roll for an attack made with a Zweihander is 6, that attack inflicts 1 mortal wound on the target in addition to any normal damage.

Inspiring Leader: This officer is a respected and consummate commander.
Add 1 to the Bravery characteristic of friendly FREEGUILD units while they are wholly within 18" of this model.

COMMAND ABILITIES

Hold the Line: This warrior stands strong in the face of the enemy and inspires their fellow soldiers to do the same.
You can use this command ability in your hero phase. If you do so, pick up to 3 friendly FREEGUILD units wholly within 18" of a friendly FREEGUILD HERO with this command ability. Until the start of your next hero phase, add 1 to hit and wound rolls for attacks made by those friendly units if they have not made a normal move or a charge move in the same turn. A unit cannot benefit from this command ability more than once per phase.

KEYWORDS
ORDER, HUMAN, CITIES OF SIGMAR, FREEGUILD, HERO, FREEGUILD GENERAL
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.

The FREEGUILD keyword is used in following Cities of Sigmar warscrolls:

None
Battleline
Leader
Leader, Behemoth
Command Abilities
If you have any HEROES in your army, you can use command abilities. Some command abilities are available to all armies, like the three on the right, while others are specific to certain models and appear on their warscroll. Some of these command abilities can only be used if that model is your general; when this is the case, it will be noted in the rules for the command ability.

In order to use any command ability you must spend 1 command point. You start the battle with 1 command point for each warscroll battalion you have in your army. In addition, you receive 1 command point at the start of each of your hero phases. You can use the same command ability several times in the same phase as long as you have enough command points to do so. Any command points you do not use can be used in a future turn. A command ability will usually specify when it is used; if it does not, it is used in your hero phase.

The FREEGUILD and HERO keywords are used in following Cities of Sigmar warscrolls:

Leader
Leader, Behemoth
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Normal Moves
Moves made in the movement phase are referred to as normal moves, to differentiate them from charge moves (made in the charge phase) and pile-in moves (made in the combat phase). A model making a normal move can move a distance in inches equal to or less than the Move characteristic shown on its warscroll.
Charge roll, charge move
Any of your units within 12" of the enemy in your charge phase can attempt to make a charge move. Pick an eligible unit and make a charge roll for it by rolling 2D6. Each model in the unit can move a number of inches equal to the charge roll. You cannot make a charge move with a unit that has run or retreated earlier in the turn, or with a unit that is within 3" of an enemy unit.

The first model you move from a unit making a charge move must finish the move within ½" of an enemy model (you do not have to pick the target for the charge before making the charge roll). If that’s impossible, or you decide not to make the charge move, the charge fails and no models in the unit can move in this phase.

Once all models in one unit have made their charge moves, you can pick another eligible unit to make a charge attempt, until all units that you want to make charge attempts have done so.

The CITIES OF SIGMAR keyword is used in following Cities of Sigmar warscrolls:

The FREEGUILD keyword is used in following Cities of Sigmar warscrolls:

None
Battleline
Leader
Leader, Behemoth

The FREEGUILD GENERAL keyword is used in following Cities of Sigmar warscrolls:

Leader
Leader, Behemoth
Army List
Warscrolls collated
© Vyacheslav Maltsev 2013-2021