Cities of Sigmar – Anointed on Frostheart Phoenix
 ]
This warscroll does not meet the selection criteria (see Filter combo-box or Settings tab).
12
4+
9
WARSCROLL

Anointed on Frostheart Phoenix

Some of the Ur-Phoenix’s spawn radiate the elemental power of ice. Surrounded by a freezing aura that slows nearby foes to a crawl, these Frostheart Phoenixes strike from on high with deadly force, ripping and tearing their prey to pieces.
MELEE WEAPONSRangeAttacksTo HitTo WoundTo WndRendDamageDmg
Ice-cold Talons
Ice-cold Talons2"3+3+-12
Great Phoenix Halberd
Great Phoenix Halberd2"43+3+-11
DAMAGE
Wounds SufferedMoveIce-cold TalonsBlizzard Aura
0-216"89"
3-414"66"
5-712"53"
8-910"42"
10+8"31"
PITCHED BATTLE PROFILE

Unit Size: 1      Points: 320
Battlefield Role: Leader, Behemoth

DESCRIPTION

A Frostheart Phoenix is a single model armed with Ice-cold Talons.

ANOINTED: This model include 1 Anointed armed with a Great Phoenix Halberd. Any command traits or artefacts of power only affect attacks made by the Anointed.

FLY: This model can fly.

ABILITIES

Attuned to Magic: The spawn of the Ur-Phoenix are imbued with potent magical energy.
In your hero phase, if a friendly WIZARD within 12" of this model casts a spell that is not unbound, this model is imbued with magical energy until the start of your next hero phase. Add 1 to save rolls for attacks that target this model while it is imbued with magical energy (this ability can never add more than 1 to the save roll).

Blizzard Aura: The chilling aura given off by a Frostheart Phoenix encases nearby foes in ice, slowing them and restricting their movement.
Subtract 1 from wound rolls for attacks made with melee weapons by enemy units within range of the Blizzard Aura ability of any friendly models. The range of the Blizzard Aura ability for this model is shown on the damage table above.

Witness to Destiny: Incoming blows and bolts of sorcery somehow contrive to miss their mark.
Roll a dice each time you allocate a wound or mortal wound to this model. On a 4+, that wound or mortal wound is negated.

COMMAND ABILITIES

Captain of the Phoenix Guard: Marked for greatness by their deity, the commanders of the Phoenix Guard can inspire their warriors to acts of greatness.
You can use this command ability at the start of the combat phase. If you do so, pick 1 friendly FROSTHEART PHOENIX that includes an Anointed. Until the end of that phase, you can re-roll wound rolls for attacks made by friendly PHOENIX TEMPLE units that are wholly within 12" of that FROSTHEART PHOENIX.

KEYWORDS
ORDER, AELF, CITIES OF SIGMAR, PHOENIX TEMPLE, MONSTER, HERO, FROSTHEART PHOENIX
Command Traits
Whether cunning strategist or berserk butcher, every general has a unique style of command. If your general is a HERO and the allegiance abilities for your army include any command traits, you can choose or roll for one for your general. If, for any reason, you must select a new general during a battle, immediately choose or roll for a trait for them. Command traits have no effect on attacks made by a general’s mount unless noted otherwise.
Artefacts of Power
These treasures are borne to war by mighty heroes. If the allegiance abilities for your army include any artefacts of power, you can choose or roll for one to be carried by a HERO from your army. You may choose one additional HERO to have an artefact for each warscroll battalion you include in your army. A HERO cannot have more than one artefact of power, and an army may not include duplicates of the same artefact of power. Artefacts of power have no effect on attacks made by a hero’s mount unless noted otherwise.
Flying
If the warscroll for a model says that the model can fly, it can pass across models and terrain features as if they were not there when it makes any type of move. Any vertical distance up and/or down is ignored when measuring a flying model’s move. It cannot finish the move on top of another model.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Casting and Unbinding Spells
A WIZARD can attempt to cast spells in its own hero phase. You cannot attempt to cast the same spell more than once in the same turn (even with a different wizard).

In order to cast a spell, first say which spell the wizard is going to attempt to use (it must be one they know). To cast the spell, roll 2D6. If the total is equal to or greater than the casting value of the spell, the spell is successfully cast.

If a spell is cast, the opposing player can choose one of their WIZARDS that is within 30" of the caster to attempt to unbind the spell before its effects are applied. To unbind a spell, roll 2D6. If the roll beats the roll used to cast the spell, then the spell is not successfully cast. Only one attempt can be made to unbind a spell.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.
Melee Weapons
In order to make an attack with a melee weapon, a model must be in range of the target unit.
Allocating Wounds
Once all of a unit’s attacks have been resolved, add up the damage that was inflicted. The player commanding the target unit must then allocate a number of wounds to the target unit equal to the damage that was inflicted.

Wounds are allocated one at a time to models in the target unit. You can allocate the wounds inflicted on your units as you see fit (the models do not have to be within range or visible to the attacking unit). However, if you allocate a wound to a model, you must keep on allocating wounds to that model until it is slain – a unit can never have more than one wounded model.

Some abilities allow you to make a roll to negate a wound or mortal wound allocated to a model; in this case the roll is made for each individual wound or mortal wound as it is allocated to the model in question. If the wound or mortal wound is negated it has no effect on the model.
Mortal Wounds
Some attacks, spells and abilities inflict mortal wounds. Do not make hit, wound or save rolls for mortal wounds. Instead, the damage inflicted on the target is equal to the number of mortal wounds that were suffered. Allocate any mortal wounds that are caused while a unit is attacking at the same time as any other wounds caused by the unit’s attacks, after all of the unit’s attacks have been completed. Mortal wounds caused at other times are allocated to models in the target unit as soon as they occur, in the same manner as wounds caused by damage from an attack.

After they have been allocated, a mortal wound is treated in the same manner as any other wound for all rules purposes.
Command Abilities
If you have any HEROES in your army, you can use command abilities. Some command abilities are available to all armies, like the three on the right, while others are specific to certain models and appear on their warscroll. Some of these command abilities can only be used if that model is your general; when this is the case, it will be noted in the rules for the command ability.

In order to use any command ability you must spend 1 command point. You start the battle with 1 command point for each warscroll battalion you have in your army. In addition, you receive 1 command point at the start of each of your hero phases. You can use the same command ability several times in the same phase as long as you have enough command points to do so. Any command points you do not use can be used in a future turn. A command ability will usually specify when it is used; if it does not, it is used in your hero phase.

The FROSTHEART PHOENIX keyword is used in following Cities of Sigmar warscrolls:

Leader, Behemoth
Behemoth
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Modifiers
Sometimes modifiers apply to characteristics or abilities. For example, a rule might add 1 to a hit roll or the Move characteristic of a model. Modifiers are cumulative. Modifiers can never reduce a dice roll to less than 1.

If a modifier applies to a random value, work out the random value first and then apply the modifier(s) to it. For example, if an ability adds 1 to a Damage characteristic of D3, the result would be worked out by rolling the D3 and adding 1 to the roll.
Making Attacks
Attacks are resolved one at a time using the following attack sequence. In some cases, you can resolve all of the attacks made by the same type of weapon at the same time (see Multiple Attacks).

1.Hit Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Hit characteristic, then it scores a hit and you must make a wound roll. If not, the attack fails and the attack sequence ends. A hit roll of 1 before modification always fails to hit the target, and a hit roll of 6 before modification always hits the target.
2.Wound Roll: Roll a dice. If the roll equals or beats the attacking weapon’s To Wound characteristic, then it is successful and the opposing player must make a save roll. If not, then the attack fails and the attack sequence ends. A wound roll of 1 before modification always fails, and a wound roll of 6 before modification is always successful.
3.Save Roll: The opposing player rolls a dice, modifying the roll by the attacking weapon’s Rend characteristic. For example, if a weapon has a -1 Rend characteristic, then 1 is subtracted from the save roll. If the result equals or beats the Save characteristic of the models in the target unit, the save succeeds and the attack sequence ends without causing any damage. If not, the save fails and the attack is successful, and you must determine damage on the target unit. A save roll of 1 before modification always fails.
4.Determine Damage: Each successful attack inflicts damage on the target unit equal to the Damage characteristic of the weapon making the attack. Most weapons have a Damage characteristic of 1, but some have a Damage characteristic of 2 or more.

The PHOENIX TEMPLE keyword is used in following Cities of Sigmar warscrolls:

None
Leader
Leader, Behemoth
Behemoth

The CITIES OF SIGMAR keyword is used in following Cities of Sigmar warscrolls:

The FROSTHEART PHOENIX keyword is used in following Cities of Sigmar warscrolls:

Leader, Behemoth
Behemoth
Army List
Warscrolls collated
© Vyacheslav Maltsev 2013-2021